[confia]

Since I've been trying a long time to run my HUAWEI E1752 I want to comment you the steps I've done. Install 0929 firmwareDownload software and install: “hyperterminal” for Windows(install in PC), “root explorer 2.9.3.” (install in zt180) and “best terminal emulator pro v.219” (install in zt180).1) Connect HUAWEI 3g on your PC and Open hyperterminal and put the name zt180, select HUAWEI 3g connection and click ok, select 460800, wait until appear in the down of the windows “connect”.2) Enter ATE and press enter.3) Enter AT^U2DIAG=0 to disabled the modems cdrom emulator+sdcard reader and modem returned answer as OK. If you ever want to factory reset type AT^U2DIAG=2764) Connect HUAWEI on zt180 and then power on, then click settings, wireless connection and lands, click wcdma and reboot zt180. Then click again in settings, wireless connection and networks, mobie networks, click in APN and click in the icon between arrow and house icon on the top of android windows and press “new APN” and complete MCC MNC id's correctly, saved it and then select it (signal strength indicator showed up on status bar at the top of android windows and it was showing my signal strength correctly, but still I had no connection).5) Open “best terminal emulator” and write “su” and press enter in android keyboard for granted superuser permissions.6) Open “rootexplorer” and accept for superuser permissions, click in “system” and click to “Mount R/W” using the button on top of root explorer window, then click in “etc” and long pressed on the init.gprs-pppd script and set permissions as executable.7) Reboot.When you want to use the HUAWEI you have to click wcdma (step 4) and reboot zt180.Thanks to omarahum and nash.villesI hope you find it useful, regards.

[wymmar]

thank u so much..this post really help me to make my huawei modem work like a champ in my zt 180..thx!!

[confia]

I'm glad that it has been useful for you.

[finincorp]

Hello ConfiaMany thanks by your help, I have 2 Hauwei 3 g modens and needs this help, bu I dont know how do this because Windows 7 has not Hiper Terminal, how can do this?Regards

[jtbnet]

[quote name='finincorp;76440]Hello ConfiaMany thanks by your help' date=' I have 2 Hauwei 3 g modens and needs this help, bu I dont know how do this because Windows 7 has not Hiper Terminal, how can do this?Regards[/QUOTE'] Can't offer much here... But I have used Teraterm for years... also mentioned in; HyperTerminal Alternatives for Windows 7

[finincorp]

Quote

Can't offer much here... But I have used Teraterm for years... also mentioned in; HyperTerminal Alternatives for Windows 7

Many thanks, installed it, so now how can I do commands ATE, etc?Sorry but I never works with Hiperterminal softwares

[finincorp]

[quote name='finincorp;76457]Many thanks' date=' installed it, so now how can I do commands ATE, etc?Sorry but I never works with Hiperterminal softwares[/QUOTE'] I found how do commands, suppose that is with modem conected and made a conection to com where is this but receive follow messageAT^U2DIAG=0ERROR^BOOT:32358018,0,0,0,75

[w_stucco]

Thanks Confia, it works perfectly also with Huawei E1692 (by TIM an italian mobile provider). I think also this thread must be "sticky".Some questions:- Can i use the AT command ""AT^U2DIAG=1" to enable the modems cdrom emulator+sdcard reader?- Why is necessary to disable this function to use the key on the tablet?- Any advice to control the on/off function of the connection? I suppose "APNDROID" could be useful but i'm not sure of the effective working of the app. Thanks anyway.

[The Omen]

[quote name='confia;75518]Since I've been trying a long time to run my HUAWEI E1752 I want to comment you the steps I've done. Install 0929 firmwareDownload software and install: “hyperterminal” for Windows(install in PC)' date=' “root explorer 2.9.3.” (install in zt180) and “best terminal emulator pro v.219” (install in zt180).1) Open hyperterminal and put the name zt180 and click ok, wait until appear in the down of the windows “connect”.2) Enter ATE and press enter.3) Enter AT^U2DIAG=0 to disabled the modems cdrom emulator+sdcard reader and modem returned answer as OK.4) Connect HUAWEI on zt180 and then power on, then click settings, wireless connection and lands, click wcdma and reboot zt180. Then click again in settings, wireless connection and networks, mobie networks, click in APN and click in the icon between arrow and house icon on the top of android windows and press “new APN” and complete MCC MNC id's correctly, saved it and then select it (signal strength indicator showed up on status bar at the top of android windows and it was showing my signal strength correctly, but still I had no connection).5) Open “best terminal emulator” and write “su” and press enter in android keyboard for granted superuser permissions.6) Open “rootexplorer” and accept for superuser permissions, click in “system” and click to “Mount R/W” using the button on top of root explorer window, then click in “etc” and long pressed on the init.gprs-pppd script and set permissions as executable.7) Reboot.When you want to use the HUAWEI you have to click wcdma (step 4) and reboot zt180.Thanks to omarahum and nash.villesI hope you find it useful, regards.[/QUOTE'] Mind if I stick a link to this in the Wiki?

[confia]

[quote name='finincorp;76465]I found how do commands' date=' suppose that is with modem conected and made a conection to com where is this but receive follow messageAT^U2DIAG=0ERROR^BOOT:32358018,0,0,0,75[/QUOTE'] Try using windows xp, I think that work well.

[confia]

[quote name='w_stucco;76541]Thanks Confia' date=' it works perfectly also with Huawei E1692 (by TIM an italian mobile provider). I think also this thread must be "sticky".Some questions:- Can i use the AT command ""AT^U2DIAG=1" to enable the modems cdrom emulator+sdcard reader?[/QUOTE']AT ^ U2DIAG = 0 (the device in-only Modem)AT ^ U2DIAG = 1 (device in modem mode + CD-ROM)[quote name='w_stucco;76541]- Why is necessary to disable this function to use the key on the tablet?[/QUOTE]I don't know' date=' only I've done has been collecting information from forums.[QUOTE=w_stucco;76541']- Any advice to control the on/off function of the connection? I suppose "APNDROID" could be useful but i'm not sure of the effective working of the app. Thanks anyway.[/QUOTE]I don't know, for now I only know what I put in the post.

[confia]

Quote

Mind if I stick a link to this in the Wiki?

In all please, information is to share.

[shikip]

Hello, I can`t understand: 1.have I to connect the ZT-180 to the PC with USB before I start the HyperTerminal and what art of connection must I choose in a dialog?2.the terminal in ZT- 180 says "su: uid 10065 not allowd to su" and root Explorer do not open! Thanks

[confia]

This manual work on 0930 with 0920 firmware.

[confia]

[quote name='shikip;77263]Hello' date=' I can`t understand: 1.have I to connect the ZT-180 to the PC with USB before I start the HyperTerminal and what art of connection must I choose in a dialog?[/QUOTE'] Sorry, I modify the manual, connect HUAWEI 3g on your PC and you must choose HUAWEI connection.

[scarfy]

Is possible to use this tutorial on a ZTE MF110 modem?I connected the ZTE MF110 to ZT-180 tablet (firmware 1013)... i used this steps:"1. touch: "settings" - "wireless & networks" - "set wcdma"(occurt tick);2. return desktop ,then reboot;3. insert the wcdma usb dongle, wait utill the wileless signal icon displayed;4. touch: "settings" - "wireless & networks" - "Mobie networks" - "access point names" - new apn –touch the “help icon”(at the top toolbar,the second form right)name : the national mobile wcdma name;apn : the national mobile wcdma apn;apn type : default;save apn;(at the bottom toolbar)5. reboot;" And i have signal but no internet access....

[confia]

[quote name='scarfy;77915]Is possible to use this tutorial on a ZTE MF110 modem?I connected the ZTE MF110 to ZT-180 tablet (firmware 1013)... i used this steps:"1. touch: "settings" - "wireless & networks" - "set wcdma"(occurt tick);2. return desktop ' date='then reboot;3. insert the wcdma usb dongle, wait utill the wileless signal icon displayed;4. touch: "settings" - "wireless & networks" - "Mobie networks" - "access point names" - new apn �touch the �help icon�(at the top toolbar,the second form right)name : the national mobile wcdma name;apn : the national mobile wcdma apn;apn type : default;save apn;(at the bottom toolbar)5. reboot;" And i have signal but no internet access....[/QUOTE'] With 1013 not work well, use 1014 and remember click wcdma when you put HUAWEI and reboot it.

[AthosTheMousketeer]

[quote name='finincorp;76465]I found how do commands' date=' suppose that is with modem conected and made a conection to com where is this but receive follow messageAT^U2DIAG=0ERROR^BOOT:32358018,0,0,0,75[/QUOTE'] Are you sure about type of your modem?Try command ATI - this should display vendor and type of modem...This AT^U2DIAG should be different for other type of modem... For example Huawei E1750 needs AT^U2DIAG=256

[iwanpc]

is there any tutorial for using ZT-180 with USB modem EVDO/CDMA?i always fail to connect using ZTE AC2726...perhaps any recent Huawei model for EVDO CDMA which is supported by ZT-180?thanks

[fandtm666]

Quote

For example Huawei E1750 needs AT^U2DIAG=256

Where can we find the correct code for other modems as i have a k3765 i would like to test withso would like to disable but to also re-enable the functionsthanks 666