Jump to content


Photo

40D (Dual Core) ICS / JB Custom Firmware


  • Please log in to reply
125 replies to this topic

#61 evertoexcel

evertoexcel

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 56 posts

Posted 23 April 2013 - 05:49 AM

Hi, After installing latest JB FW, I had so much problem with battery (4%/hour during standby time) that I applied the battery fix script! I had it 5% charge left when I applied the script, But after rebooting battery indicator shows 100%...is it normal, why? If I remember it should show 0%. Anyway, I still charged it for 10 hrs. Although it's discharging normally, nothing has improved really:((

#62 Kimmen00

Kimmen00

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 56 posts

Posted 24 April 2013 - 09:26 AM

Had the same problem.. tried everything but no luck so I reverted back to ICS

#63 valkoz

valkoz

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 411 posts

Posted 25 April 2013 - 01:39 PM

Had the same problem.. tried everything but no luck so I reverted back to ICS


You need to understand what battery charge won't disappear in case of the indicator wrongly shows little charge.

It's the battery controller's problem only. After you used battery fix script and reboot, battery controller 'll start work properly, and after some minutes of charging indicator shall show 100% (in case you have battery 100% charged before error)
don't want to argue - want to discuss

#64 Kimmen00

Kimmen00

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 56 posts

Posted 27 April 2013 - 10:42 AM

Did that several Times.. still constantly 4% loss per hour when the tablet is idle. No biggie since your ics is very good..

#65 al355io

al355io

    Member

  • Jr. Member
  • PipPip
  • 27 posts

Posted 30 April 2013 - 09:02 AM

My tablet is always totally discharged in 3 hours....but it's not a problem because i use it only at home......

Inviato dal mio GT-I9100 con Tapatalk 2

#66 evertoexcel

evertoexcel

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 56 posts

Posted 10 June 2013 - 06:56 AM

Hi Valkoz,

I saw you are working on updated JB Firmware (Latest Jelly Bean Firmware 06/01/2013). Could you please let us know when it will be ready?

Thank you so much !!!

Edited by evertoexcel, 10 June 2013 - 06:57 AM.


#67 aimnaldo

aimnaldo

    Newbie

  • Jr. Member
  • Pip
  • 1 posts

Posted 16 June 2013 - 09:17 PM

cannot download lastest jelley bean firmware
after click show button , show message "Waiting"

cannot download lastest jelly bean firmware
after click show button, show message "Waiting"

#68 inky202020

inky202020

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 64 posts

Posted 17 June 2013 - 08:09 AM

cannot download lastest jelley bean firmware
after click show button , show message "Waiting"

cannot download lastest jelly bean firmware
after click show button, show message "Waiting"

From this Thread,Page 1-post 1 from Valkoz,just hit show on spoiler from item 1 and you will see the links,same for items 2,3 and so on,and follow instructions,hope it helps. 8)

#69 evertoexcel

evertoexcel

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 56 posts

Posted 18 June 2013 - 06:49 AM

From this Thread,Page 1-post 1 from Valkoz,just hit show on spoiler from item 1 and you will see the links,same for items 2,3 and so on,and follow instructions,hope it helps. 8)


Hi,

I don't think you're referring to latest Firmware. Valkoz is working on FW/Basenband version 2.3 and it's not ready yet. In the link you'll find the old one (en05, Baseband version 2.2).

#70 Croiz

Croiz

    Member

  • Jr. Member
  • PipPip
  • 24 posts

Posted 18 June 2013 - 01:35 PM

Heya , recently updates my onda , Can someone tell me how to set battery script please ( guide perhaps ) ? my battery die so quick >.< Regards croize.

#71 Croiz

Croiz

    Member

  • Jr. Member
  • PipPip
  • 24 posts

Posted 18 June 2013 - 02:40 PM

ok found script , Do i run normal or hard o.O?
Tryed both and seems working :)

Edited by Croiz, 18 June 2013 - 04:53 PM.


#72 inky202020

inky202020

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 64 posts

Posted 18 June 2013 - 07:00 PM

Hi,

I don't think you're referring to latest Firmware. Valkoz is working on FW/Basenband version 2.3 and it's not ready yet. In the link you'll find the old one (en05, Baseband version 2.2).

No I was not. 8)

#73 abbasi

abbasi

    Newbie

  • Jr. Member
  • Pip
  • 3 posts

Posted 24 June 2013 - 07:26 AM

hi admin

i cannot watch link

#74 abbasi

abbasi

    Newbie

  • Jr. Member
  • Pip
  • 3 posts

Posted 24 June 2013 - 07:29 AM

where i can get link

#75 abbasi

abbasi

    Newbie

  • Jr. Member
  • Pip
  • 3 posts

Posted 24 June 2013 - 07:30 AM

my ainol novo 10.1" battery auto charging

#76 Bogdan109

Bogdan109

    Member

  • Jr. Member
  • PipPip
  • 11 posts

Posted 30 June 2013 - 03:52 AM

Hello Valkoz,

Finally I can post my problem. I have a Allview AllDro 3 Speed Duo tablet(Onda romanian rebranded). I installed custom rom V971D but this tablet have different motherboard revision which led me to the blocking touch screen. I was helping a colleague on a forum from Romania who had the same problem and installed firmware version above. Now the tablet works perfectly but I don't have the option to activate the primary camera because Vi40D have only front camera. What should I do to activate both camera (front have 2Mpx and back camera have 5Mpx)?
Original soft here: http://translate.goo...oid-4112122012/

Original motherboard revision:
assert(!less_than_int(1354018715, getprop("ro.build.date.utc")));
assert(getprop("ro.product.device") == "g12refM1005RO" ||
getprop("ro.build.product") == "g12refM1005RO");

You custom rom revision(who block my screeen):

assert(!less_than_int(1352793471, getprop("ro.build.date.utc")));
assert(getprop("ro.product.device") == "g12refM1006" ||
getprop("ro.build.product") == "g12refM1006");
I can't install original soft because give me a error,first something like error asert 7 and i found a solution for this,eliminate the 3 lines above but give another error something like can't verify and update stops.Can you make a custom rom from original soft to work on this tablet?Original soft is slow and have problems with WIFI and sound.
Thanks.

Edited by Bogdan109, 30 June 2013 - 05:35 AM.


#77 valkoz

valkoz

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 411 posts

Posted 01 July 2013 - 04:18 PM

Hello Valkoz,

Finally I can post my problem. I have a Allview AllDro 3 Speed Duo tablet(Onda romanian rebranded). I installed custom rom V971D but this tablet have different motherboard revision which led me to the blocking touch screen. I was helping a colleague on a forum from Romania who had the same problem and installed firmware version above. Now the tablet works perfectly but I don't have the option to activate the primary camera because Vi40D have only front camera. What should I do to activate both camera (front have 2Mpx and back camera have 5Mpx)?
Original soft here: http://translate.goo...oid-4112122012/

Original motherboard revision:
assert(!less_than_int(1354018715, getprop("ro.build.date.utc")));
assert(getprop("ro.product.device") == "g12refM1005RO" ||
getprop("ro.build.product") == "g12refM1005RO");

You custom rom revision(who block my screeen):

assert(!less_than_int(1352793471, getprop("ro.build.date.utc")));
assert(getprop("ro.product.device") == "g12refM1006" ||
getprop("ro.build.product") == "g12refM1006");
I can't install original soft because give me a error,first something like error asert 7 and i found a solution for this,eliminate the 3 lines above but give another error something like can't verify and update stops.Can you make a custom rom from original soft to work on this tablet?Original soft is slow and have problems with WIFI and sound.
Thanks.


I understood your problem.

I downloaded Allview AllDro 3 Speed Duo from here http://www.allview.r...peed3Duo_V1.rar

Regarding Allview AllDro 3 Speed Duo specification:

it has 2 cameras (2.0 megapixel front / back 2.0 MP, Panoramic) - yes?

it has NO hardware Volume buttons (v40 has) - yes?

In case 2 cameras and no hardware volume buttons - Allview AllDro 3 Speed Duo is OEM version of 971D - yes?

In case you use my custom JB CUSTOM ROM based on stock ROMs v.2.0-2.1 from here http://www.slatedroi...ustom-firmware/ - it blocks touchscreen - yes?

- what for you use v40 rom?
------------------------------------
Solutions:
1.- if you want to use 971D roms for AllDro 3 Speed Duo - it's possible.
I must to know what hardwares don't work when you use 971D roms for AllDro 3 Speed Duo.
2.- if you want to use v40 roms for AllDro 3 Speed Duo - it has no sence, better to use 971D roms.
3.- if you want to use AllDro 3 Speed Duo original ROM and to eliminate "... can't verify" or "...verifying failed" - see under the spoiler.
Spoiler

4.Or download this ROM
Update Speed3Duo V1_slate Link is here:https://docs.google.com/file/d/0BzbXO5Y8aALfbjh2OU1qWm9wZUE/edit
Briefly:
- it's repacked for you (like 971D) original firmware from here http://www.allview.r...peed3Duo_V1.rar
- removed non system applications - I think, better to install them again from GoogLe Play
Attached File  973.jpg   61.73KB   11 downloads
- changed old animation - because Allview uses only 1 png - see no progress
- added animation from 971D - sorry no time to make Allview - it looks like here http://www.slatedroi...post__p__918345 - without Mexico flag
- full root
- added flash player support
- added update-binary in META-INF (w/o it will be error)
- removed checking in assert(!...) - can use any roms now
- something else, do not remember now
- added in factory_update_param.aml:
--wipe_data
--wipe_cache
--wipe_media

you must to backup all your data, media before flashing. You can remove these lines, but I advise to use them - otherwise will be some errors in the google applications

- language - Romanian, country - Romania, timezone - Bucharest

PS. It took about 10 minutes to make rom, sorry - had no more time right now. You need to check, how it works.

Edited by valkoz, 01 July 2013 - 08:32 PM.

don't want to argue - want to discuss

#78 Bogdan109

Bogdan109

    Member

  • Jr. Member
  • PipPip
  • 11 posts

Posted 01 July 2013 - 11:54 PM

I understood your problem.

I downloaded Allview AllDro 3 Speed Duo from here http://www.allview.r...peed3Duo_V1.rar

Regarding Allview AllDro 3 Speed Duo specification:

it has 2 cameras (2.0 megapixel front / back 2.0 MP, Panoramic) - yes?

it has NO hardware Volume buttons (v40 has) - yes?

In case 2 cameras and no hardware volume buttons - Allview AllDro 3 Speed Duo is OEM version of 971D - yes?

In case you use my custom JB CUSTOM ROM based on stock ROMs v.2.0-2.1 from here http://www.slatedroi...ustom-firmware/ - it blocks touchscreen - yes?

- what for you use v40 rom?
------------------------------------
Solutions:
1.- if you want to use 971D roms for AllDro 3 Speed Duo - it's possible.
I must to know what hardwares don't work when you use 971D roms for AllDro 3 Speed Duo.
2.- if you want to use v40 roms for AllDro 3 Speed Duo - it has no sence, better to use 971D roms.
3.- if you want to use AllDro 3 Speed Duo original ROM and to eliminate "... can't verify" or "...verifying failed" - see under the spoiler.

Spoiler

4.Or download this ROM
Update Speed3Duo V1_slate Link is here:https://docs.google.com/file/d/0BzbXO5Y8aALfbjh2OU1qWm9wZUE/edit
Briefly:
- it's repacked for you (like 971D) original firmware from here http://www.allview.r...peed3Duo_V1.rar
- removed non system applications - I think, better to install them again from GoogLe Play
Attached File  973.jpg   61.73KB   11 downloads
- changed old animation - because Allview uses only 1 png - see no progress
- added animation from 971D - sorry no time to make Allview - it looks like here http://www.slatedroi...post__p__918345 - without Mexico flag
- full root
- added flash player support
- added update-binary in META-INF (w/o it will be error)
- removed checking in assert(!...) - can use any roms now
- something else, do not remember now
- added in factory_update_param.aml:
--wipe_data
--wipe_cache
--wipe_media

you must to backup all your data, media before flashing. You can remove these lines, but I advise to use them - otherwise will be some errors in the google applications

- language - Romanian, country - Romania, timezone - Bucharest

PS. It took about 10 minutes to make rom, sorry - had no more time right now. You need to check, how it works.

Hello Valkoz,

I have AllDro 3 Speed DUO(I use vi40 rom because has similar motherboard only back camera is missing and only rom has unlock my screen) with frontal buton and hardware buton of volums.Have 2 cameras ,Frontal 2Mpx and Back 5Mpx.I've tried rom and work.You are the best.Now working both cameras.I have one more question:Is there a possibility to modify kernel and add more governor(like smart *arse v2),I/o scheduler and more processor frequiecy?
Thanks.


Edited by Bogdan109, 02 July 2013 - 10:45 AM.


#79 valkoz

valkoz

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 411 posts

Posted 02 July 2013 - 10:49 AM

You mean - all is OK? :rolleyes: I'm glad.

"I have one more question:Is there a possibility to modify kernel and add more governor(like smart *arse v2),I/o scheduler and more processor frequiecy?"

- it's possible with kernel (bootloader and boot img)
- but more simple method to add more governors - use CPU Tuner - for overclocking/power saving - https://play.google....e=search_result

Member Petr from Poland described in details how to. Look for his posts.

Edited by valkoz, 02 July 2013 - 10:59 AM.

don't want to argue - want to discuss

#80 Bogdan109

Bogdan109

    Member

  • Jr. Member
  • PipPip
  • 11 posts

Posted 02 July 2013 - 02:23 PM

You mean - all is OK? :rolleyes: I'm glad.

"I have one more question:Is there a possibility to modify kernel and add more governor(like smart *arse v2),I/o scheduler and more processor frequiecy?"

- it's possible with kernel (bootloader and boot img)
- but more simple method to add more governors - use CPU Tuner - for overclocking/power saving - https://play.google....e=search_result

Member Petr from Poland described in details how to. Look for his posts.

Yes is ok.Tank you very much.Will Onda update V971D to 4.2.2?