Hi All
Here I place my version of Linux kernel (kernel folder)
Source code here (not always last versions)
WARNING
-made specifically for mk808 (with fixed core voltage)
-no warranty, use at your own risk
Features
* 1920х1080, 1280х720 (it is checked)
* RAM at 400MHz
* Core dynamically 816 MHz - 1.51 Ghz (it is restricted only to core temperature)
* the second display interface is switched off
* the ion memory manager is switched off (+80mb RAM)
* Support for GPU (Mali) in the kernel + working modules
* Mali on 266MHz, but can turn to 400MHz
* Some changes to the kernel to support XVideo extension (for my xorg fb driver)
* ...
+flash recovery.img into recovery area
+your favorite Linux root place under linuxroot label (if you have not)
+add into /etc/modules
bcm40181
rk29-ipp
ump
disp_ump
mali
drm
mali_drm
/etc/rc.local
+add chmod 666 /dev/mali /dev/ump
to comment out (#) all lines with fbset (if is)
+rewrite modules (/lib/modules) and firmwares (/lib/firmware) from mod+fw.tar.gz
(then "depmod -a" and reboot)
+for Mali also needed libraries from here (only mali400_2.1-13_armhf.deb), if not working - look here
to delete files /usr/share/X11/xorg.conf.d/*mali*.conf(if is)
Updated 20.03.2013(some corrections under the new video driver)
-------------------------------------------------------------------------------------------------------------------
in folder video_drv - compiled (for ubuntu quantal and debian wheezy) xorg fb driver with XVideo(some acceleration of output video in full screen) and Mali support
Updated 27.02.2013(fixed auto set display mode(no need more fbset in rc.local))
Updated 20.03.2013 (subfolder tst)(acceleration of rendering GPU) new xorg.conf
caution alpha version
+ place rk30fb_drv.so into /usr/lib/xorg/modules/drivers/ and xorg.conf into /etc/X11/
Here I place my version of Linux kernel (kernel folder)
Source code here (not always last versions)
WARNING
-made specifically for mk808 (with fixed core voltage)
-no warranty, use at your own risk
Features
* 1920х1080, 1280х720 (it is checked)
* RAM at 400MHz
* Core dynamically 816 MHz - 1.51 Ghz (it is restricted only to core temperature)
* the second display interface is switched off
* the ion memory manager is switched off (+80mb RAM)
* Support for GPU (Mali) in the kernel + working modules
* Mali on 266MHz, but can turn to 400MHz
* Some changes to the kernel to support XVideo extension (for my xorg fb driver)
* ...
+flash recovery.img into recovery area
+your favorite Linux root place under linuxroot label (if you have not)
+add into /etc/modules
bcm40181
rk29-ipp
ump
disp_ump
mali
drm
mali_drm
/etc/rc.local
+add chmod 666 /dev/mali /dev/ump
to comment out (#) all lines with fbset (if is)
+rewrite modules (/lib/modules) and firmwares (/lib/firmware) from mod+fw.tar.gz
(then "depmod -a" and reboot)
+for Mali also needed libraries from here (only mali400_2.1-13_armhf.deb), if not working - look here
to delete files /usr/share/X11/xorg.conf.d/*mali*.conf(if is)
Updated 20.03.2013(some corrections under the new video driver)
-------------------------------------------------------------------------------------------------------------------
in folder video_drv - compiled (for ubuntu quantal and debian wheezy) xorg fb driver with XVideo(some acceleration of output video in full screen) and Mali support
Updated 27.02.2013(fixed auto set display mode(no need more fbset in rc.local))
Updated 20.03.2013 (subfolder tst)(acceleration of rendering GPU) new xorg.conf
caution alpha version
+ place rk30fb_drv.so into /usr/lib/xorg/modules/drivers/ and xorg.conf into /etc/X11/