[jmvenus7]

flashkaisel, on 11 February 2013 - 11:07 AM, said:

Venu 7 dont have Bluetooth. but if you put a dongle Bluetooth, i think have to work.

I don't have bluetooth dongle, but I have tried with RJ45 dongle, and this one is not recognized by the venus (and im sure the dongle works has I use it with an other ainol tablet (with 4.0.4 android)


it's strange that the menu parameters, network, doesn't have ethernet entry, even if you choose 'more' you juste obtain vpn, mobile or other options but nothing about ethernet.

perhaps there is a file with à commentary that makes ethernet not recognized ... i don't know

[boling]

hi. can i use these updates for my ramos w41? ainol hero2 and ramos 41 both use the same cpus

[sikke]

Nickos-V, on 10 February 2013 - 11:27 AM, said:

Please include detailed Antutu 3.1 scores for these tablets. Helps to see a full breakdown of scores for comparing to other tablets/chips. Thanks.

Sry my absense. I will. I have all the tablets except rk3188 .. yet
I have the freescale quad too. Actions, exynos, amlogic, allwinner a31 and rk3066.

Sent from my JY-G2 using Tapatalk 2

[sikke]

boling, on 12 February 2013 - 11:47 AM, said:

hi. can i use these updates for my ramos w41? ainol hero2 and ramos 41 both use the same cpus

No you cant please dont try.

Sent from my JY-G2 using Tapatalk 2

[Nickos-V]

sikke, on 12 February 2013 - 07:41 PM, said:

Sry my absense. I will. I have all the tablets except rk3188 .. yet
I have the freescale quad too. Actions, exynos, amlogic, allwinner a31 and rk3066.

Wow! You really love tablets!

Do you like 4412 or A31 better? My guess, maybe 4412 because better balance? How much do you like your Venus or Hero II compared to the other tablets you have? Thanks. Later,

[OVONEL]

HI..
After I update my ainol Venus firmware..
The menu GPS in setting >> location services >> gps is missing now
Do you have the original firmware

When I install gps software, it cannot detect gps

I also have questions:
1. Was the menu gps in setting >>location services >> gps FAKE?
Because it was there before I update my firmware
2. Does someone here have original firmware for ainol Venus?

Thank you

[Madduck]

Hi..

can some one please make a small guide on how to use tablet production tool.
I have successed in connecting my device to the tool, but when i start to download it says DOWNLOAD_ADEC_FAILED.
Does anyone have an idea on what im doing wrong.

all help will be appreciated:)

[boedyirh]

Madduck, on 13 February 2013 - 02:58 PM, said:

Hi..

can some one please make a small guide on how to use tablet production tool.
I have successed in connecting my device to the tool, but when i start to download it says DOWNLOAD_ADEC_FAILED.
Does anyone have an idea on what im doing wrong.

all help will be appreciated:)

Change to another computer. It works for me.

This post has been edited by boedyirh: 14 February 2013 - 08:44 AM

[Madduck]

boedyirh, on 14 February 2013 - 05:51 AM, said:

Change to another computer. It works for me.

Hi again..

Sorry but that didn't help. I have tried on two different Win 7 and one XP machine.
I must be doing something wrong.

here is what i have done.
1. Install tablet tool
2. start program and load the firmware that Sikke has supplied.
3. choose both misc.img (MISC Partition) and system.img (SYSTEM Partition).
4. Connect Ainol novo 7 Venus tablet. (Win 7 recognize tablet as USB harddrive).
5. Update USB harddrive driver to Actions USB 2.0 WinUSB device.
6. tablet tool recognize my device and i start the download, but it fails after a few seconds with the error DOWNLOAD_ADEC_FAILED.

Which of the basical config should be checked.
I have PRODUTION, FLASH_ERASE and FLASH_READ_CHECK as it is per default.

Should i do anything on the tablet be download?
Please help, its a bit frustrating:(.

[rui no onna]

Madduck, on 14 February 2013 - 02:29 PM, said:

Hi again..

Sorry but that didn't help. I have tried on two different Win 7 and one XP machine.
I must be doing something wrong.

here is what i have done.
1. Install tablet tool
2. start program and load the firmware that Sikke has supplied.
3. choose both misc.img (MISC Partition) and system.img (SYSTEM Partition).
4. Connect Ainol novo 7 Venus tablet. (Win 7 recognize tablet as USB harddrive).
5. Update USB harddrive driver to Actions USB 2.0 WinUSB device.
6. tablet tool recognize my device and i start the download, but it fails after a few seconds with the error DOWNLOAD_ADEC_FAILED.

Which of the basical config should be checked.
I have PRODUTION, FLASH_ERASE and FLASH_READ_CHECK as it is per default.

Should i do anything on the tablet be download?
Please help, its a bit frustrating:(.

I remember I had 3 images, misc, system and recovery.

[J_Norberg]

I have done all steps in Madducks post but I cant get the product tool to recognize my tablet! In the device manager it looks like the Actions WinUSB Device drivers has been properly installed. But the tablet is not recognized when plugged in.

What am I doing wrong??

[sanane88]

Hi. My from turkey. I know a little english. I try to install I get an error. sound off+power menu; installation aborted error. What is the solution ?

program erro ?
http://i.imgur.com/PgL1oQ2.jpg

This post has been edited by sanane88: 14 February 2013 - 11:26 PM

[J_Norberg]

J_Norberg, on 14 February 2013 - 05:11 PM, said:

I have done all steps in Madducks post but I cant get the product tool to recognize my tablet! In the device manager it looks like the Actions WinUSB Device drivers has been properly installed. But the tablet is not recognized when plugged in.

What am I doing wrong??

Since I have never flashed firmwares on android devices before I didn´t know about the "5-second-volume+ start" (what do you call it?). When I did that everything was quite straight forward. Now my tablet is MUCH faster than before! Increased the AnTuTu score from ~5000 to ~12000. The difference in responsiveness in the UI is massive!

[J_Norberg]

sanane88, on 14 February 2013 - 06:45 PM, said:

Hi. My from turkey. I know a little english. I try to install I get an error. sound off+power menu; installation aborted error. What is the solution ?

program erro ?
http://i.imgur.com/PgL1oQ2.jpg

Loooks like the tablet is on and connected to the PC as a mass storage device. I made the same error and when I was told to power off the tablet and start it by pressing volume+ for 5 seconds it was recognized by the flashing tool.

[tofi]

Rob B, on 11 February 2013 - 12:16 PM, said:

Is there a way to run games like dead trigger, MC3 or NOVA? Performance is worse than my ELF 2 u.u

Dead Trigger is running fine on my Venus 7 (i'm using official play.google) version.

[sanane88]

Do not have any other way? It does not work

[Rob B]

tofi, on 15 February 2013 - 09:42 AM, said:

Dead Trigger is running fine on my Venus 7 (i'm using official play.google) version.

I can play it too, but dead trigger is really laggy, the play store comes full by default.

[nin28]

J_Norberg, on 15 February 2013 - 02:55 AM, said:

Since I have never flashed firmwares on android devices before I didn´t know about the "5-second-volume+ start" (what do you call it?). When I did that everything was quite straight forward. Now my tablet is MUCH faster than before! Increased the AnTuTu score from ~5000 to ~12000. The difference in responsiveness in the UI is massive!

Can you clarify the startup procedure you explained here. I'm having a hard time getting into the programming mode. Thanks.

[tofi]

Hi all Novo 7 Venus fans, I can confirm, the new fw (0203) is really great,
I've used it for updat, but be sure use all the partitions see screenshot:
The score after update is much faster: Antutu 11519 (6500 original fw.) and Nenamark2 47,5 (27 original fw.)
Enjoy!

Attached File(s)

•  Screenshot_2013-02-15-01.jpeg (96.47K)
  Number of downloads: 98
•  Screenshot_2013-02-15-02.jpeg (370.08K)
  Number of downloads: 90
•  Screenshot_2013-02-15-03.jpeg (523.44K)
  Number of downloads: 76
•  Screenshot_2013-02-15-04.jpeg (563.47K)
  Number of downloads: 60

[sanane88]

tofi, on 15 February 2013 - 03:23 PM, said:

Hi all Novo 7 Venus fans, I can confirm, the new fw (0203) is really great,
I've used it for updat, but be sure use all the partitions see screenshot:
The score after update is much faster: Antutu 11519 (6500 original fw.) and Nenamark2 47,5 (27 original fw.)
Enjoy!

i know a little english ?
How did you meet the driver? Can you tell us how did you make the installation of