Jump to content


Photo

[ROM] [4.2.1] Novo7 Flames 0201 Official AML Firmware


  • Please log in to reply
359 replies to this topic

#1 rdis

rdis

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 50 posts

Posted 05 February 2013 - 12:49 PM

Novo7 Flames 0201 Official AML Firmware

QM Screen:
Download Link1
Download Link2

File: Ainol-E4-20130131-qimei-usbburning.zip
Size: 280,339,646 bytes
Modified: February 5, 2013, 10:02:10
MD5: 948089FA311077BD5A4B91326113EB15
SHA1: 0014FE49DA12A9636B6D15F28F07BACAB6DC1EA0
CRC32: 8D58CB96

TM Screen:
Download Link
Mediafire (Thanks to fuser-invent)

Flash tool:
AML Flash Tool (USB-Burning-tool-v1.6.2.0128):
Download Link1
Download Link2

Flash Tutorial:
bbs.ainol
myphone (Thanks to Frontier)
post #14 (Thanks to dd_yulius)

TWRP Custom Recovery (Thanks to CT our mother of ROM :good: )
TM
QM

File Transfer
MTP
ADB

android.process.acore pop up error after setup Google Play?
put this Contact.apk to /system/app/ and chmod rw-r--r-- (Thanks to hithotguest)

Stuck with this firmware?

Try This

Original Thread:
bbs.ainol

Edited by rdis, 01 April 2013 - 03:44 PM.

  • Annonovo and ainolpk like this
Device History:
- K-Touch U86 / Lotus2
- Novo7 Flame TM-MMA
- ZTE Blade
- Nokia 110
- Samsung SGH E590
- Nokia 6600
- Nokia 2300
- Sony Ericcson T230
- Siemens C45
- Nokia 3350


#2 lucho_elmillo

lucho_elmillo

    Newbie

  • Jr. Member
  • Pip
  • 3 posts

Posted 05 February 2013 - 12:53 PM

Such a good news, i hope the TM version soon.
Anyone tested yet?
Thanks for sharing

#3 ch0c0lateb0yctg

ch0c0lateb0yctg

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 46 posts

Posted 05 February 2013 - 03:11 PM

this is good news,,,,but why ainol forum didnt upload it yet on their website?? TM user here

#4 morph32

morph32

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 55 posts

Posted 05 February 2013 - 03:17 PM

I was trying to translate the flash tutorial from the linked Chinese forum with google translate but it was a mess and I cannot figure out how to flash it.

I would appreciate a detailed flash tutorial from someone who manged to flash it already. And maybe the first impressions.

Thanks.

#5 aprendroid

aprendroid

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 106 posts
  • LocationColombia, South America

Posted 05 February 2013 - 04:25 PM

Novo7 Flames 0201 Official AML Firmware

QM Screen:
Download Link1
Download Link2

File: Ainol-E4-20130131-qimei-usbburning.zip
Size: 280,339,646 bytes
Modified: February 5, 2013, 10:02:10
MD5: 948089FA311077BD5A4B91326113EB15
SHA1: 0014FE49DA12A9636B6D15F28F07BACAB6DC1EA0
CRC32: 8D58CB96

TM Screen: Not yet released


Flash with this:
AML Flash Tool (USB-Burning-tool-v1.6.2.0128):
Download Link1
Download Link2


Flash Tutorial:
Chinese Forum


Admin test review (translated):
Today the middle of the night to write graphic tutorial, players set of closed beta begins tomorrow, no problem two days release, New Year gift for the Flames players, including Chi Mei, and Tianma screen firmware, packaged at the same time are the latest 4.2.1 version, in addition to the light induction seemingly still invalid, the other normal, very smooth, and my hand CMO screen machines did not find any backlight current sound (regardless of the minimum medium maximum brightness and maximum brightness than before) and did not find that there sonic boom, even if keep touch vibration, touch sound and unlock sound, only the normal sound and vibration sonic boom, it seems AML study that PMU almost ..... If we brush, and this is true .... so long .. the Aino better hardware problem back really wrong .....


Many, many thanks for your post.

Could you include a link to the original post appeared at Ainol forum (the post at http://bbs.ainol.com/forum.php) ?

I guess the post is this:

http://bbs.ainol.com...21&extra=page=1

Is it so ?

Thanks and good luck

#6 Tango One

Tango One

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 145 posts

Posted 05 February 2013 - 06:38 PM

It looks like the process is similar to before
http://www.lokumrom....Using_AML_Flash

Edited by Tango One, 05 February 2013 - 07:01 PM.


#7 rdis

rdis

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 50 posts

Posted 05 February 2013 - 10:08 PM

Please confirm for those who have successfully used the flashing tutorial on Lokum.
I have TM, can't test yet..
Device History:
- K-Touch U86 / Lotus2
- Novo7 Flame TM-MMA
- ZTE Blade
- Nokia 110
- Samsung SGH E590
- Nokia 6600
- Nokia 2300
- Sony Ericcson T230
- Siemens C45
- Nokia 3350


#8 chepito

chepito

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 118 posts

Posted 06 February 2013 - 01:22 AM

I apologize for the ignorance, what is AML?

#9 ainolpk

ainolpk

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 195 posts
  • LocationLahore

Posted 06 February 2013 - 01:41 AM

Anybody flashed? and How?

#10 jogermech

jogermech

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 34 posts
  • LocationRussia

Posted 06 February 2013 - 01:41 AM

what is AML?

Really it is Amlogic - SoC manufacturer

#11 Frontier

Frontier

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 265 posts
  • LocationChios, Greece

Posted 06 February 2013 - 02:34 AM

Flashed the ROM according to the tutorial here: http://www.myphone.g...949#post4533949

The problem is that after enabling Google Play services (i.e set-up my account) the system at 5 second intervals pops up messages like "unfortunately process android.process.acore has stopped" which is not fatal, but it's very annoying.

Tried all suggested solutions (clear Contacts, Google, etc app data), seems to stop for a while, but after re-entering my Google account data, it appears again :(

#12 Eriol

Eriol

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 51 posts

Posted 06 February 2013 - 03:28 AM

Flashed the ROM according to the tutorial here: http://www.myphone.g...949#post4533949

The problem is that after enabling Google Play services (i.e set-up my account) the system at 5 second intervals pops up messages like "unfortunately process android.process.acore has stopped" which is not fatal, but it's very annoying.

Tried all suggested solutions (clear Contacts, Google, etc app data), seems to stop for a while, but after re-entering my Google account data, it appears again :(


Dear Frontier,

which ROM did you use before you flashed the new stock ROM? I had the same problem when I changed to CM10.1. Check the following:

Can you access internal storage?

Does the file manager ask for root rights to access internal storage?

If one answer is "yes" you might have had a Feiyu ROM on your device before that re-partitioned the internal storage. Especially if you cannot access your internal storage at all this is a strong signal that you should flash another earlier stock ROM before you change to the new one.

I have not tries it our myself. Not sure if this helps.

Cheers,

Eriol
Gadgets:
tablet - Ainol Novo 7 Fire QM with Android 4.2.2 (feiyu 1011)
phone - Samsung Galaxy S3 with stock Android 4.1.2
desktop - Asus AMD barebone with Kubuntu 12.10
notebook - HP Pavilion with Windows 8 and HP Elitebook with Windows 7

#13 highotguest

highotguest

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 69 posts

Posted 06 February 2013 - 04:23 AM

China google play store,where can found the gapp for this rom?

#14 dd_yulius

dd_yulius

    Member

  • Jr. Member
  • PipPip
  • 25 posts

Posted 06 February 2013 - 06:18 AM

I used : Notebook (with USB 2.0 port) and Win7 Home Basic 64 bit.
My Flame : QM and installed Feiyu ROM 0103.

I flashed and followed @Frontier and Lokumrom steps ...

1. Download Ainol-E4-20130131-qimei-usbburning.zip dan USB-Burning-tool-v1.6.2.1228
2. Extract USB-Burning-tool-v1.6.2.1228 into your PC/NoteBook
3. Turn Power Off Flame and plug it into PC/Notebook using USB (better using USB 2.0 port)
4. Push Volume - and Power wait until Windows detect New Hardware
5. Then select the driver manualy and browse into folder USB-Burning-tool-v1.6.2.1228 and select folder AmlogicusbBurningdriver
6. When it's done.. by default your USB connection will be named "WorldCup Device"
7. Still Power Off Flame Flame Screens still OFF/blank , run ImageBurnTool.exe
8. Flame will be detected in one of eight ports and the status is "Connect"
9. I was select Erase Nand and push Start button, offcourse all data in nand (internal storage) destroyed :( .. wait until it's done (green blink)
10. After that... I selected menu File>Import Upgrade File and browse Ainol-E4-20130131-qimei-usbburning.zip. And I didn't select any button...
11. Push Start button...then blue color progress is running... wait until it's done 100% with green blink.
12. Unplug the Flame, and Turn Power ON... taste the Jelly Bean... :yahoo:

Regards

Edited by dd_yulius, 06 February 2013 - 10:02 PM.


#15 Eriol

Eriol

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 51 posts

Posted 06 February 2013 - 06:29 AM

I used : Notebook (with USB 2.0 port) and Win7 Home Basic 64 bit.
My Flame : QM and installed Feiyu ROM 0103.

I flashed and followed @Frontier and Lokumrom steps ...

1. Download Ainol-E4-20130131-qimei-usbburning.zip dan USB-Burning-tool-v1.6.2.1228
2. Extract USB-Burning-tool-v1.6.2.1228 into your PC/NoteBook
3. Turn Power Off Flame and plug it into PC/Notebook using USB (better using USB 2.0 port)
4. Push Volume - and Power wait until Windows detect New Hardware
5. Then select the driver manualy and browse into folder USB-Burning-tool-v1.6.2.1228 and select folder AmlogicusbBurningdriver
6. When it's done.. by default your USB connection will be named "WorldCup Device"
7. Still Power Off Flame, run ImageBurnTool.exe
8. Flame will be detected in one of eight ports and the status is "Connect"
9. I was select Erase Nand and push Start button, offcourse all data in nand (internal storage) destroyed :( .. wait until it's done (green blink)
10. After that... I selected menu File>Import Upgrade File and browse Ainol-E4-20130131-qimei-usbburning.zip. And I didn't select any button...
11. Push Start button...then blue color progress is running... wait until it's done 100% with green blink.
12. Unplug the Flame, and Turn Power ON... taste the Jelly Bean... :yahoo:

Regards


Hi dd_yulius,

I have the same setup here (except I am running CM10.1 ...). I did not have the time to proceed with the flashing yet.

Is the ROM fully "internationalized" (i.e., does it start with the Chinese screen or the usual international setup screen)?

Is everything working as expected?

Does Google Play Store work well (see post above)?

Is the device/ROM rooted?

Thanks for your testing and input!

Eriol
Gadgets:
tablet - Ainol Novo 7 Fire QM with Android 4.2.2 (feiyu 1011)
phone - Samsung Galaxy S3 with stock Android 4.1.2
desktop - Asus AMD barebone with Kubuntu 12.10
notebook - HP Pavilion with Windows 8 and HP Elitebook with Windows 7

#16 dd_yulius

dd_yulius

    Member

  • Jr. Member
  • PipPip
  • 25 posts

Posted 06 February 2013 - 07:29 AM

I turn my Flame primary for Multi Media Player.
So far this AML ROM 0131 (JB 4.2.1) :
- I don't hear sonic boom when the first time play the movie (like Feiyu ROM 0103)
- I quess MTP is unstable (or maybe the ports or the USB cable) when I tried copying VOB file
- Wifi seems slowly (using Connectify, copying movie more than 500MB)
- Auto Rotation fixed
- Mosquito buzz fixed
- Phablet UI

Still rainy in Jakarta and trafic jam on the way back home, so I stuck in office, can't test HDMI yet...

Regards

EDIT :
@ Eriol
- First Loading...ROM fully "internationalized" but I (always do )change the language : EN-USA
- I'm using mostly for Multimedia Player, it's good enough for me right now...
- I don't use Goggle Play
- I think it Rooted

Edited by dd_yulius, 06 February 2013 - 07:41 AM.

  • Eriol and ainolpk like this

#17 ainolpk

ainolpk

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 195 posts
  • LocationLahore

Posted 06 February 2013 - 07:51 AM

Thanks yulius, more testers! ;)

#18 jogermech

jogermech

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 34 posts
  • LocationRussia

Posted 06 February 2013 - 10:07 AM

BTW, 4.2.1 for Tianma screen is uploaded already

#19 rdis

rdis

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 50 posts

Posted 06 February 2013 - 10:20 AM

TM screen is up now
Device History:
- K-Touch U86 / Lotus2
- Novo7 Flame TM-MMA
- ZTE Blade
- Nokia 110
- Samsung SGH E590
- Nokia 6600
- Nokia 2300
- Sony Ericcson T230
- Siemens C45
- Nokia 3350


#20 highotguest

highotguest

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 69 posts

Posted 06 February 2013 - 10:34 AM

Flashed the ROM according to the tutorial here: http://www.myphone.g...949#post4533949

The problem is that after enabling Google Play services (i.e set-up my account) the system at 5 second intervals pops up messages like "unfortunately process android.process.acore has stopped" which is not fatal, but it's very annoying.

Tried all suggested solutions (clear Contacts, Google, etc app data), seems to stop for a while, but after re-entering my Google account data, it appears again :(


android.process.acore pop up error ,i put Contacts.apk into /system/app floder and chmod rw-r--r-- can fixed.sorry for my bad eng.

PS:anyone can fix google play because many many app nothing can found
Attached File  Contacts.zip   1.59MB   1980 downloads

Edited by highotguest, 06 February 2013 - 10:35 AM.