[JohnTzig]

Feiyu just released new version of Jelly Bean FW (4.1.2)

Quote

Flame Edition:

Update:
* Based on the new modified source code to compile
* The core of the new compilation, update the core driver
* Support for gravity sensing flames
* Repair previous versions of Flash and tf card reader slow
* Fix on a version of the standby screen press the power will darken
* Optimized code to enhance fluency
* Improved video file compatibility
* Integrated full-screen switching applications
* Light sensor unrepaired

Downloads:

QM screen - Mirror

TM screen - Mirror

Have not tested yet, I will test it later and report (TM/Freescale Sensor)

This post has been edited by JohnTzig: 01 February 2013 - 06:24 AM

[nikaslan]

Just installed it. Happy Spring Festival indeed!!

I have a TM/Freescale Sensor Fire. (s/n 20121216)
I installed it over feiyu 1031 and the first time it was stuck at boot logo.
Flashed it a second time and booted just fine!

First impressions:

Smoooth and faast! (compared to the ICS FW)
Reliable G-sensor operation
Pop sound still there, less pronounced
Very good Play compatibility
Faster wake-up when pressing the power button
Can't hear the 'mosquito' sound yet. I will check at night

All in all, a really great FW for the TM/Freescale tablets.

This post has been edited by nikaslan: 31 January 2013 - 07:46 AM

[Nolatux]

Thanks for posting

This post has been edited by Nolatux: 31 January 2013 - 08:14 AM

[woodyncfc]

Hi,

It's been a while since I last updated my Fire however, I want to have a look at Jellybean to see what that it is like. I have not installed any firmware made by Freiyu and I have read that there are different procedures for installing different developers firmwares. Please could someone be so kind as to advise me how I would go about updating my Fire to this firmware? Apologies if this is covered elsewhere.

Woody

This post has been edited by woodyncfc: 31 January 2013 - 10:41 AM

[besony]

I already have the 0113 firmware ( 4.1.2 ) JB (Feiyu)
Will installing this 0130 erase the data again?

Thanks!

Feiyu FTW!

[Frdavid1]

i'm now on cm 10.1 with tm,but i want to flash to this rom so i put the 2 files in the rar on my sd and pressed the power+volume button and this is the screen i get:
what do i suppose to do?
thanks

Attached File(s)

•  תמונה.JPG (95.24K)
  Number of downloads: 60

This post has been edited by Frdavid1: 31 January 2013 - 11:30 AM

[JohnTzig]

Frdavid1, on 31 January 2013 - 11:29 AM, said:

i'm now on cm 10.1 with tm,but i want to flash to this rom so i put the 2 files in the rar on my sd and pressed the power+volume button and this is the screen i get:
what do i suppose to do?
thanks

The steps are:

• Wipe data/factory reset
  
• Wipe cache
  
• Wipe media
  
• Apply update from ext
  
• Choose zip file
  
• Wipe data/factory reset
  
• Wipe cache
  
• Wipe media
  
• Reboot

[JohnTzig]

besony, on 31 January 2013 - 09:34 AM, said:

I already have the 0113 firmware ( 4.1.2 ) JB (Feiyu)
Will installing this 0130 erase the data again?

I think if you do not do the 3wipes, the data will not be erased.

[Frdavid1]

JohnTzig, on 31 January 2013 - 12:14 PM, said:

The steps are:

• Wipe data/factory reset
  
• Wipe cache
  
• Wipe media
  
• Apply update from ext
  
• Choose zip file
  
• Wipe data/factory reset
  
• Wipe cache
  
• Wipe media
  
• Reboot

Thanks man!! it worked! wakeup time takes a while for me, does it have any solution? i'm a newbe

[ch0c0lateb0yctg]

JohnTzig, on 31 January 2013 - 12:16 PM, said:

I think if you do not do the 3wipes, the data will not be erased.

plz reply asap plz,,,,i also want to know da same thing

[entity1]

nikaslan, on 31 January 2013 - 06:17 AM, said:

Just installed it. Happy Spring Festival indeed!!

I have a TM/Freescale Sensor Fire. (s/n 20121216)
I installed it over feiyu 1031 and the first time it was stuck at boot logo.
Flashed it a second time and booted just fine!

First impressions:

Smoooth and faast! (compared to the ICS FW)
Reliable G-sensor operation
Pop sound still there, less pronounced
Very good Play compatibility
Faster wake-up when pressing the power button
Can't hear the 'mosquito' sound yet. I will check at night

All in all, a really great FW for the TM/Freescale tablets.

Does it still produce black images when using the camera? Youtube app working? How about netflix? Battery? Woot! lol


@johntzig can a new fire model (1211tm, stock rom) with the 800mb partition straight up flash 0130 or have to go through a different install? Thanks

This post has been edited by entity1: 31 January 2013 - 01:55 PM

[JohnTzig]

entity1, on 31 January 2013 - 01:42 PM, said:

@johntzig can a new fire model (1211tm, stock rom) with the 800mb partition straight up flash0130 or have to go through a different install? Thanks

Yes, you can flash the ROM straight, I did this coming from 1211 kernel. Only remember to wipe data,cache,media before and after flashing.

[entity1]

alrighty. lemme give it a shot too and report my findings alongside yours. thanks much.


[EDIT]

Findings so far:

1. Netflix works
2. Youtube works
3. Took 15 camera shots with stock jb cam, all 15 good.
4. Mosquito noise still present at low-medium brightness
5. Popping sound still there, weaker but still there

This post has been edited by entity1: 31 January 2013 - 03:22 PM

[papaschtroumpf]

Camera working for me (Fire QM)
installed youtube from the market and working too

I'm not planning on using this ROM much, I want to install CM10.1 for multiuser but not having much luck with the instructions in that thread so far.

[morph32]

JohnTzig, on 31 January 2013 - 04:15 AM, said:

Feiyu just released new version of Jelly Bean FW (4.1.2)

Thank you for posting it!

[BartAfterDark]

I read somewhere that Feiyu won't release any new versions besides this one. Anyone knows why that is ?

[Billcnz]

BartAfterDark, on 31 January 2013 - 05:29 PM, said:

I read somewhere that Feiyu won't release any new versions besides this one. Anyone knows why that is ?

Only comment I read was not to expect a jb 4.2 anytime soon. He's a volunteer and has limited time like the rest of us.

Sent from my Novo 7 Flame running CM10.1 and Tapatalk HD

[Armi5]

entity1, on 31 January 2013 - 02:07 PM, said:

alrighty. lemme give it a shot too and report my findings alongside yours. thanks much.


[EDIT]

Findings so far:

1. Netflix works
2. Youtube works
3. Took 15 camera shots with stock jb cam, all 15 good.
4. Mosquito noise still present at low-medium brightness
5. Popping sound still there, weaker but still there

if you're using this patch the mosquito sound gone?

http://www.slatedroi...-fire-by-feiyu/

[entity1]

Armi5, on 31 January 2013 - 06:04 PM, said:

if you're using this patch the mosquito sound gone?

http://www.slatedroi...-fire-by-feiyu/

Can't use that patch i think it's only for qm models. Technically there shouldn't be any mosquito noise for TMs if you leave it at maximum brightness. Although this one's a little more quiet than the stock rom (1211) that I used. I have to say though, I'm impressed by this rom. Not sure about the battery reading just yet, but I'm using battery monitor advised by ralleweichs at another post and it seems to last longer than usual. Will give out more info once I've got more hours on it.

[Nolatux]

This is a very snappy rom and I like the ICS stock launcher as opposed to launcher on JB 4.2 because of the hot zones on the screen edges. I prefer touching the screen edges to move between desktops instead of swiping (which allows the screen to stay cleaner with less smudging). Bluetooth also works as well. Disabling touch sounds (and going with haaptic feedback for key press reporting) eliminates the popping noise that have plagued this line of tablets.

Nice job!

This post has been edited by Nolatux: 31 January 2013 - 08:44 PM