[midas99]

peejay1963, on 03 April 2013 - 08:29 AM, said:

I tried it your way to flash the 0289.rar
but when I start the EMMC-tool I get the error 'License expired' and when I try the Emmc-tool from 0288 I get the message 'Invalid User'

Greetings , Eddy

same problem...the solution is:

1- with regedit delete this key: HKEY_LOCAL_MACHINE\SOFTWARE\FOXDA
2- delete this file c:\windows\system32\emmc_date.ini
3- on the pc change the data to 20 march 2013 (the program works until 30 march 2013)
4- run program

or i did the patch for .exe

[peejay1963]

midas99, on 28 April 2013 - 06:12 AM, said:

same problem...the solution is:

1- with regedit delete this key: HKEY_LOCAL_MACHINE\SOFTWARE\FOXDA
2- delete this file c:\windows\system32\emmc_date.ini
3- on the pc change the data to 20 march 2013 (the program works until 30 march 2013)
4- run program

or i did the patch for .exe..

I got a solution in another forum... worked fine !

http://www.pandawill...ll=1#post106744

Greetz Eddy

[annettek]

shijo, on 16 March 2013 - 03:21 PM, said:

Dear Ampe/Sanei 10 3G users.... Finally after searching searching a lot ( it was waste as I could not find any updating guides)....with the help of a my Chinese friend who called to Ampe office and communicate with the engineers..I was able to update using a USB flash. Here I describes how to do it.

Get the required firmware ie 0289

1. Connect the USB cable tot he Computer
2. Power off you device
3. Connect the other end of the cable to the Tablet PC
4. Now press power + volume up and down buttons ( all together )
5. Now it will ask you to install drivers --- for windows XP continue install hardware and direct to the folder 0289 -- - 高通工具 --- drivers. For win 7 go to the device manager and find other devices with a question mark. Right click and update softeare - - - direct to 高通工具 --- drivers
6. After succesful installation of the driver, you will get an extra drive in my computer - -Check the name of the memory mass drive and remember it
7. Now open the eMMC tool located in the 高通工具 folder
8. After opening click the first drive on the upper part of the eMMc tool and change the first letter to what you find in the My Computer as mass storage.
9. At the lower part of the eMMC tool --- - browse ---- and direct towards 0289 ----- FW8937-V0.5.3.0_S_ANPEI-20121218
10. Now click on the first options with # 1
11. That is all... Now you can see the Tab is flashing.

If any doubts please keep in touch with so that I can help you. Excuse me for the late explanation of the guide.

Regards,

SHIJO

do you know how to unbrick the sanei/ampe dualcore 3g

as while flashing new rom the flash stoped now my tablet connects to xp with qualcom loder but no drive appears and i am unble to restore it. any help to fix this issue would be great in advance thanks+