[shijo]

Hello Friends,

I have got my Ampe A10 3g Version and this is my Build Number IMM761 SW:V0.5.3.0_S_ANPEI.
Is it the latest firmware for Ampe A10 3G Version?
Thanks & regards,

SHIJO

[derath]

Yes it is latest.
http://szampe.com/su...own.asp?id=1016

Its USB flash - Boot.img does someone know how to flash this? to ampe a10 3g? what key to push when linking usb cable?




Doesnt run on win7 64bit?

This post has been edited by derath: 28 January 2013 - 02:55 PM

[shijo]

Hello All,

My Ampe A10 3G Version having build number IMM761 SW:V0.5.3.0_S_ANPEI. I got Firmware from http://www.szampe.co...011-08/0237.rar and did an update. Now my build version becomes IMM761 SW V0.3.9.0_ANPEI and the GREEN light always on the right upper part. Also it makes a small sound from the right upper corner. I understand from the Ampe site that I flashed with a wrong firmware instead of Ampe A10 Samsung Version. I got download my real firmware from http://www.szampe.co...wn.asp?id=1016. How can I update to this version. I tried using the methos in this forum but only boot.img and recovery.img are coming while using Livesuite. Please Help me
thanks & regards,

[biloupuce]

HI,
i have same problem so ...

[shijo]

I tried also. The only when to update it through the updater tool provided in the 0289 folder from the ampe site. Hello Biloupuce...check ur PM ..

thx

[woody21]

Is there anyway to upgrade with out livesuit or "updating all image" as that doesn't show on my recovery menu??

Many thanks

[biloupuce]

today there is new file that explain how but i don't know what !

[tigger-gg]

shijo, on 30 January 2013 - 08:06 AM, said:

I got download my real firmware from http://www.szampe.co...wn.asp?id=1016. How can I update to this version

http://translate.goo...JpB-vOW8DtjSdvw
I tested it and it works.

[ivko1982]

I also tested this but it just gives me Hid Compliant device and USB Human interface device?

How to install drivers to recgonize it as a flash drive?

[tigger-gg]

ivko1982, on 14 March 2013 - 06:28 PM, said:

I also tested this but it just gives me Hid Compliant device and USB Human interface device?

How to install drivers to recgonize it as a flash drive?

You have to change it somewhere in Settings. (Sorry but I do not own the device.) You can change from or to MTP and Flash.

[ivko1982]

Hi

I managed to get it as a drive G: but in eMMC DL it always gives me an error: rawprogram.xml.

How to fix that?

[tigger-gg]

ivko1982, on 15 March 2013 - 01:51 PM, said:

Hi

I managed to get it as a drive G: but in eMMC DL it always gives me an error: rawprogram.xml.

How to fix that?

Remove all chinese charaters in the names of folders, e.g rename

A1005TG（尚伊）三星屏USB升级软件

to

A1005TG

Put the firmware folder in

Quote

2. Specify the folder with the firmware, it is in our C: \ Program Files \ Qualcomm \ QPST \ bin hopefully not forgotten ...

[ivko1982]

Hi

I did all the things like you said, but it still gives me the same error.

What to do? If you know how to do it you can connect to my computer (Teamviewer) and maybe you can do it?

Thanks

[shijo]

Dear Ampe/Sanei 10 3G users.... Finally after searching searching a lot ( it was waste as I could not find any updating guides)....with the help of a my Chinese friend who called to Ampe office and communicate with the engineers..I was able to update using a USB flash. Here I describes how to do it.

Get the required firmware ie 0289

1. Connect the USB cable tot he Computer
2. Power off you device
3. Connect the other end of the cable to the Tablet PC
4. Now press power + volume up and down buttons ( all together )
5. Now it will ask you to install drivers --- for windows XP continue install hardware and direct to the folder 0289 -- - 高通工具 --- drivers. For win 7 go to the device manager and find other devices with a question mark. Right click and update softeare - - - direct to 高通工具 --- drivers
6. After succesful installation of the driver, you will get an extra drive in my computer - -Check the name of the memory mass drive and remember it
7. Now open the eMMC tool located in the 高通工具 folder
8. After opening click the first drive on the upper part of the eMMc tool and change the first letter to what you find in the My Computer as mass storage.
9. At the lower part of the eMMC tool --- - browse ---- and direct towards 0289 ----- FW8937-V0.5.3.0_S_ANPEI-20121218
10. Now click on the first options with # 1
11. That is all... Now you can see the Tab is flashing.

If any doubts please keep in touch with so that I can help you. Excuse me for the late explanation of the guide.

Regards,

SHIJO

[ivko1982]

Hi

Tried everything I have seen here and now my Sanei N10 3g is DEAD!!!
But, it is all my fault, i mean one of the wires of battery was unsolderd and I havent notice that.
Do you think I short circuit it?

I got a new drive but eMMC tool did not flash my tab so I formatted that new drive and I got Qualcomm USB QD Loader 9008(COM 12)
When I used QPST tool I could still see my tab at COM 12, when I tried to use emmcdownloader.exe no more phone.

From that point when I connect the tab nothing happens, but I still see that tab can be charged by charger.
Is the problem in my USB (on the tab) or something else?
How can I check it?

Thanks

[azwina]

shijo, on 16 March 2013 - 03:21 PM, said:

Dear Ampe/Sanei 10 3G users.... Finally after searching searching a lot ( it was waste as I could not find any updating guides)....with the help of a my Chinese friend who called to Ampe office and communicate with the engineers..I was able to update using a USB flash. Here I describes how to do it.

Get the required firmware ie 0289

1. Connect the USB cable tot he Computer
2. Power off you device
3. Connect the other end of the cable to the Tablet PC
4. Now press power + volume up and down buttons ( all together )
5. Now it will ask you to install drivers --- for windows XP continue install hardware and direct to the folder 0289 -- - 高通工具 --- drivers. For win 7 go to the device manager and find other devices with a question mark. Right click and update softeare - - - direct to 高通工具 --- drivers
6. After succesful installation of the driver, you will get an extra drive in my computer - -Check the name of the memory mass drive and remember it
7. Now open the eMMC tool located in the 高通工具 folder
8. After opening click the first drive on the upper part of the eMMc tool and change the first letter to what you find in the My Computer as mass storage.
9. At the lower part of the eMMC tool --- - browse ---- and direct towards 0289 ----- FW8937-V0.5.3.0_S_ANPEI-20121218
10. Now click on the first options with # 1
11. That is all... Now you can see the Tab is flashing.

If any doubts please keep in touch with so that I can help you. Excuse me for the late explanation of the guide.

Regards,

SHIJO

can you explain with detail ? i still cannot update, it is need to power off when doing this ???
for eMMC tool it is only fill in first & second letter only ?

[shijo]

azwina, on 26 March 2013 - 07:46 AM, said:

can you explain with detail ? i still cannot update, it is need to power off when doing this ???
for eMMC tool it is only fill in first & second letter only ?

Hello...add me to your skype. My skype is shijopj2005
OR let me know u have any messenger

thanks

[peejay1963]

Hello, I have a Sanei N10 3G dualcore a few weeks now
it came with firmware IMM761 SW:V0.4.0.0_SHANGYI_S_SHANGYI

Because of laggyness of the system and not to be able to play HD video's (Jerky and a/v out off sync)
I flashed an other rom (found in this forum) v0.3.5.5.0
but the problems stay the same.

I tried it your way to flash the 0289.rar
but when I start the EMMC-tool I get the error 'License expired' and when I try the Emmc-tool from 0288 I get the message 'Invalid User'

What am I doing wrong?
I follow the steps as you discribed.

It would be easier to have a *.zip file that I could copy to the sd-card and flash it with the tablets upgrade program.

Is this rom available as *.zip ?


Greetings , Eddy

[azwina]

peejay1963, on 03 April 2013 - 08:29 AM, said:

Hello, I have a Sanei N10 3G dualcore a few weeks now
it came with firmware IMM761 SW:V0.4.0.0_SHANGYI_S_SHANGYI

Because of laggyness of the system and not to be able to play HD video's (Jerky and a/v out off sync)
I flashed an other rom (found in this forum) v0.3.5.5.0
but the problems stay the same.

I tried it your way to flash the 0289.rar
but when I start the EMMC-tool I get the error 'License expired' and when I try the Emmc-tool from 0288 I get the message 'Invalid User'

What am I doing wrong?
I follow the steps as you discribed.

It would be easier to have a *.zip file that I could copy to the sd-card and flash it with the tablets upgrade program.

Is this rom available as *.zip ?


Greetings , Eddy

don't wasting time to flash other firmware i can comfirm this SANEI n10 3g cannot play HD video with properly and also cannot watch youtube full HD video.
you can go back to www.szsanei.com download firmware

This post has been edited by azwina: 04 April 2013 - 09:20 PM

[peejay1963]

azwina, on 04 April 2013 - 09:19 PM, said:

don't wasting time to flash other firmware i can comfirm this SANEI n10 3g cannot play HD video with properly and also cannot watch youtube full HD video.
you can go back to www.szsanei.com download firmware

Bummer

The sales person ensured me that it could play hd videos without problems.