| ||
Headphone Jack
#1
Posted 21 January 2013 - 02:01 PM
I have a slightly different issue: when I put reuglar headphones into the Hero I get stereo sound, but the main speakers stay on too! Kinda defeats the purpose of having headphones if everyone else is forced to listen to your stuff at the same time.
Has anyone else experienced this?
#2
Posted 21 January 2013 - 05:28 PM
#3
Posted 22 January 2013 - 11:55 AM
I am looking into the bluetooth receivers out there to see if this will solve this most disappointing problem.
#5
Posted 23 January 2013 - 09:53 PM
I have two earphone, one have remote control and one not. I try it simply, remote control that one still only have left sound, but the other one is working perfectly stereo!
See the difference in the pictures, there isn't the jack length problem.


#6
Posted 25 January 2013 - 05:36 AM
MasuHK, on 23 January 2013 - 09:53 PM, said:
I have two earphone, one have remote control and one not. I try it simply, remote control that one still only have left sound, but the other one is working perfectly stereo!
Four pole connector probably works.
But the headjack problem is mainly due to the Ainol Hero case wich is designed in such a way the top is protruding and the bottom cover which has the socket is inside. When headphone connected, if you turn the tablet upside down, you will see part of the pin is still outside even in the Ainol original headphone itself.
We must find in the market a headphone, female-male connector, which is a 4 pole connector. may be that will help.
#7
Posted 25 January 2013 - 06:14 AM
The links related to this post are given below.
Jelly Bean USB Audio
Adapter
This post has been edited by StarF1: 25 January 2013 - 06:15 AM
#8
Posted 25 January 2013 - 09:39 AM
#9
Posted 25 January 2013 - 05:56 PM
StarF1, on 25 January 2013 - 05:36 AM, said:
Nope, as MasuHK said, only a TRS plug works. TRRS probably doesn't.
StarF1, on 25 January 2013 - 06:14 AM, said:
Generic USB audio support does not work on Ainol Amlogic tablets (see here), Jelly Bean or not. Let's hope that'll be fixed.
And that adapter you linked wouldn't work. It looks like a simple mechanical adapter and it says it's specially made for the Motorola Razr.
This post has been edited by Tzul: 25 January 2013 - 06:01 PM
#10
Posted 26 January 2013 - 03:20 AM
#11
Posted 28 January 2013 - 11:02 AM
I must have a Hero that is even more defective than normal - even the Ainol buds which shipped with the tablet don't seem to disconnect the tablet speakers. And believe me, I shaved down the plastic on that plug ALL the way so nothing was preventing the plug from inserting all the way into the jack.
Oh well.
#12
Posted 28 January 2013 - 12:13 PM
I used the original ear buds from the Hero, and soldered a stereo headset jack to it. That way I still use the 2/32 longer plug to fit in the Hero and then plug my headphones into the new jack.
Results: After soldering the 3 wires onto the new plug, I can hear music thru both ears, but, weirdly enough, NO VOICE CHANNEL. So imagine listening to music, hearing the instruments, but when the vocals start, they are muted down to very low. Not sure why the middle channel is not coming thru. My solders are very clean.
Karoke anyone?
Oh well, bluetooth receiver is on order now....
#13
Posted 15 February 2013 - 03:09 AM
I have tried 3 sets.
Sounds works, but i habe not solve the problem with the BT Mic. If is use voip, Sound BT Headphoneset, mic only use the internal. And thats very crab.
Has anybody work BT Headphoneset with Voip (Skyp/Tango/Sipdroid)?
#14
Posted 22 February 2013 - 11:45 AM
#16
Posted 23 February 2013 - 08:20 AM
#18
Posted 30 March 2013 - 10:42 PM

Help












