[Tomato Pirate]

Hello All~
Firstly, I have CM 10.1 before and updated it not using TWRP/Clockwork Mod. I had a startup problem which led me to wipe everything--cache, factory reset, internal sd, and system. I was able to do fresh install of CM 10.1 since then.

Then my camera became green. It's just plain green--front cam or rear. Not the image is green but the screen.
I updated to Feiyu 0115 thinking it would be fixed but still no. Any solutions?

Thanks!

-edit-

Front cam is working...only the rear is green

This post has been edited by Tomato Pirate: 20 January 2013 - 12:06 PM

[Armi5]

My face cam is black, and the back camera is green in every app except the stock one ... i cant scan QR code or anything

Fire QM with Feiyu 0115

[Tomato Pirate]

Armi5, on 20 January 2013 - 12:13 PM, said:

My face cam is black, and the back camera is green in every app except the stock one ... i cant scan QR code or anything

Fire QM with Feiyu 0115

I'm using the stock one and it's unfortunately green :<

[Billcnz]

Tomato Pirate, on 20 January 2013 - 12:49 PM, said:

I'm using the stock one and it's unfortunately green :<

You probably have the loose flex cable from the camera, will need to open carefully and reseat cable. User moumou on CM10.1 thread had similar problem.

Sent from my Novo 7 Flame running CM10.1 and Tapatalk HD

[moumou]

Yes In my case I realised it was du to loose cable and electrostatic causing solarized or geen image. Best is to dischsarge youself before you open it, replug cable and if you can try to put some antistatic stuff in the casing. I know there are spray but the other day I saw anti-electrostatic tape on the web. I am considering to put some myself... (one can use it to better fix the flex cable).

Also in my case both camera where showing problem as opposed with the OP.

This post has been edited by moumou: 21 January 2013 - 05:26 AM

[veloci]

Armi5, on 20 January 2013 - 12:13 PM, said:

... i cant scan QR code or anything

Fire QM with Feiyu 0115

I solved this. It is not a clean solution but it works:

1. you need a root-enabled Filemanager
2. extract libcamera_client.so from feiyus 1031 firmware
3. rename the original 0115 /system/lib/libcamera_client.so to something like /system/lib/libcamera_client.so.orig
4. copy the extracted libcamera_client.so to /system/lib/
5. set the permissions of the copied libcamera_client.so to rw-r--r--
6. reboot

Now scanning of qr-codes is possible but the "black pictures" issue is back...

This post has been edited by veloci: 21 January 2013 - 03:32 AM

[Armi5]

veloci, on 21 January 2013 - 03:26 AM, said:

I solved this. It is not a clean solution but it works:

1. you need a root-enabled Filemanager
2. extract libcamera_client.so from feiyus 1031 firmware
3. rename the original 0115 /system/lib/libcamera_client.so to something like /system/lib/libcamera_client.so.orig
4. copy the extracted libcamera_client.so to /system/lib/
5. set the permissions of the copied libcamera_client.so to rw-r--r--
6. reboot

Now scanning of qr-codes is possible but the "black pictures" issue is back...

Thank you very much )
That's worked, and all cameras are working fine, no black or green pics (tested with app called Scan, and Google Goggles, and with stock camera app)
QR codes working too

Thanks the solution!

[Tomato Pirate]

How do you do this fix using Paranoid Android QM 1.3 (based on Feiyu 0130)?
Or the manual fix about the wire thing. Thank you

[Kleintje Pils]

You could try to flash this recent fix by Feiyu:
http://www.slatedroi...post__p__561546

[ilam82]

Kleintje Pils, on 02 February 2013 - 06:33 AM, said:

You could try to flash this recent fix by Feiyu:
http://www.slatedroi...post__p__561546

I am a beginner at android, how to Flash this patch