@ all who have a (bricked) Crystal
Posted 06 February 2013 - 07:22 PM
This is my history. I was trying to change my build.prop but i forgot one parameter and after i rebooted the tablet, it wasn't show up nothing. Then, i tried to fix my tablet, but i hadn't done much research and i put the version Soul Gem v0.3. Since this update, my cam and g-sensor doesn't work. I tried a lot of version and several information in this forum, but until now, i wasn't have success.
Today i tried the guide in this topic and the firmware was installed, but my cam and g-sensor doesn't work.
My tablet is Ainol Novo 7 Crystal, date 121108.
Please, i installed several versions and works, excepted the cam and g-sensor...
Posted 08 February 2013 - 11:03 AM
After much time (more or less one week researching) i try one way to fix cam and gsensor.
ATTENTION: I FIXED MY PROBLEM of CAM AND G-SENSOR WITH THE STEPS BELLOW.
* Download the CM10 with name "cm-10-20121220-UNOFFICIAL-elf2"
* Download the recovery with name "cwm_184.108.40.206_ubifs"
* Download crystal compatibility v1.1 with name "crystal_cm10_compatibility-1.1"
* Download gapps with name "gapps-jb-20121011-signed-ubifs"
* SD CARD with 2G
I had the soul gem v0.3 instaled at my ainol and my cam and gsensor wasn't work. Then i follow a lot of guid in the internet and wasn't work, but had one almost worked and i was guided it. Bellow have my steps:
1- Extract the content of this (cwm_220.127.116.11_ubifs) in the root of a MicroSD.
2- Put ROM(cm-10-20121220-UNOFFICIAL-elf2), GAPPS(gapps-jb-20121011-signed-ubifs) and COMPATIBILITY in your SD CARD.
3- Turn on the tablet keeping pressed VOL- and POWER untill you see the green droid.
4- In RECOVERY MOD, I HAVE NOT CLEANED ANYTHING!!!!
5- In RECOVERY MOD, choose Install from SD CARD the ROM, after GAPPS, after COMPATIBILITY in this sequence.
6- Now select "Reboot system now".
After reboot, my Ainol come back to normal after this...
I Hope this steps helps somebody.
And sorry for my english, i'm learning.
Download the pack here
Posted 18 February 2013 - 01:22 AM
sorry for bad english.
Posted 29 May 2013 - 10:19 AM
Posted 31 May 2013 - 09:55 PM
The Crystal 2 is a quad core and totally different hardware than the dual core tablets. I don't think any of us really know much about them yet so you'll have to Quad Core forums for help. Never ever flash anything to your tablet unless you are 100% sure it is compatible with your device or you already know how to unbrick it.
please consider a donation. My ROMS - *Crystal Clear (Ainol Crystal) *Anti-Hero (Ainol Hero) *Elenari (Ainol Elf2) *Astronautica (Ainol Aurora2) *Karbonn Custom (Karbonn SmartTab ST8 & ST10)
My DEVICES - *HP Touchpad *Ainol Crystal *Ainol Hero *Ainol Fire *Cube U30GT Mini-S *Nexus 7 (2013)
I don't respond to most PM's just because of the amount I get. If you have a question the best way to get an answer is to post in one of my threads.
My Ainol Crystal "Get Started" Guide. ----- My [HOW TO] Unbrick Your Ainol Crystal Guide.
- ← Anyone experience screen problems out of the box?
- Ainol Novo 7 Crystal
- Ubuntu Touch in Ainol Crystal? →