Download the firmware from the link My link
Download RK Batchtool from the link My link
Extract the both the Firmware and RK batchtools and keep them in a folder at a specific location in the computer :eg desktop or D: drive.
Now the most important part.
Do not use the power cable,just charge your X700 above 50%.
Switch off the tablet.
Connect the usb cable first to the Computer at the back not usb front header .
Now press both power and Volume + button and attach the USB cable to the tablet at the same time.
Leave the Power and Volume + buttons as soon as you get the Windows detection sound.
Now go to Control Panel of your PC and you will see an unrecognized device there.
Now right click on it and install the drivers that you had extracted in the RK batch tool folder.
Start RK batchtool it will show a green icon,on the left.
Rest is same......Open RKBatchTool and if it is chinese click the first button on the bottom left and select the bottom item on the list
Select the path to your firmware with the ... button on the top right
If the device is green it means it can upgrade if it's a different color restart the process from begining.
Press the upgrade button and wait(make sure your tablet is stable and you have a good usb cable, the one they supplied with my tablet was junk)
After upgrading your tablet should reboot and begin installing the new firmware
This post has been edited by The Incinerator: 05 February 2013 - 12:31 PM