[Christian Troy]

in fact, the zt bootloader flashes kernel and recovery when you use the VOL+ and POWER trigger. After that it boots to the freshly flashed recovery

[kristake]

Christian, please tell me if you know: because i want to try games like Temple Runner, Rail Rush and others now must to flash again Aokp 4.2 or cm10.1 or Paranoid 4.2( right now I have on my c97 cm10), it's about the fixed g sensor(for that,many thanks). The major problem with jb 4.2 is the online tv apps, black screen( i think you know that on the AOKP topic). Do you know, this problem is resolved?

[Christian Troy]

It should be fixed, Netflix at least works so I guess the other will too

[kristake]

Thanks, the tv online apps works great now. I try Temple Runner, the game run perfect.The g sensor it's ok now but only tilt left and right. I try a simulator plane, the tilt up or down doesn't works.

[Christian Troy]

That might be a limit of the memsic g sensor. Probably because comes bundled with other sensors that take care of z axis, but zenithink to cut costs doesn't include them.

[NicolasQ]

kristake, on 14 February 2013 - 07:57 AM, said:

put the zt-update folder(extract the common zip) to the root of microsd. Are you sure if you do that right?

yep, done that and re-done this about 10 times so far, and no luck.. see screenshots (maybe I am doing something wrong....)
 2013-02-15 20_36_08-Removable Disk (H_).png (48.6K)
Number of downloads: 23

 2013-02-15 20_36_38-zt-update.png (24.6K)
Number of downloads: 20

[NicolasQ]

Christian Troy, on 14 February 2013 - 08:37 AM, said:

in fact, the zt bootloader flashes kernel and recovery when you use the VOL+ and POWER trigger. After that it boots to the freshly flashed recovery

so any reason this is not working, and what could I try to make it do this???

thanks in advance for any help you can provide

[CBpbxEcmecmBeH]

NicolasQ, on 15 February 2013 - 05:38 AM, said:

yep, done that and re-done this about 10 times so far, and no luck.. see screenshots (maybe I am doing something wrong....)
2013-02-15 20_36_08-Removable Disk (H_).png

2013-02-15 20_36_38-zt-update.png

I had once a problem like that.. can you check the difference between command and command.first_install files and if they're the same just rename the latter to the former and try again.. that solved it for me, but I didn't understand the reason why it wouldn't work.. Also try formatting the memory card, before putting the zt-update folder in AND the "rom".zip AND the "gapps".zip in the ROOT directory of the card.

[Christian Troy]

try to use a small sized 2 gb microsd FAT formatted, with just one partition

[NicolasQ]

CBpbxEcmecmBeH, on 15 February 2013 - 05:44 AM, said:

I had once a problem like that.. can you check the difference between command and command.first_install files and if they're the same just rename the latter to the former and try again.. that solved it for me, but I didn't understand the reason why it wouldn't work.. Also try formatting the memory card, before putting the zt-update folder in AND the "rom".zip AND the "gapps".zip in the ROOT directory of the card.

Thanks for the advice... tried and now luck... sadly :-/

[NicolasQ]

Christian Troy, on 15 February 2013 - 05:54 AM, said:

try to use a small sized 2 gb microsd FAT formatted, with just one partition

Yep, it seems it does not read the high capacity cards, as I have tried all the once I have and neither seem to work (16GB and up), but I do not have any lower capacity cards, seems I may have to buy a 2GB card as one I have no longer works (e.g. cant even copy files onto it)...

will try and then advice on success or otherwise

[CBpbxEcmecmBeH]

NicolasQ, on 16 February 2013 - 07:24 AM, said:

Thanks for the advice... tried and now luck... sadly :-/

So, what did you do exactly? I find it hard to believe it's not working once you follow the procedure...
Can try with a different ROM? Like 10.0 or AOKP

Greets

Sent from my Nexus 7 using Tapatalk HD

[bledad]

sorry for this intrusion
hello

i've try put my usb dongle gps on c93 tablet
i put rom CyanogenMod 10.1 of C.Troy 2013-01-26
my driver it's ok in ttyUSB0 with cp210x
but if make : stty -F /dev/ttyUSB0 ispeed 9600 or stty -F /dev/ttyUSB0 9600
result stty -F /dev/ttyUSB0 -a
speed 0 baud; line = 0;

you can help
thank you


PS:Thank you Christian Troy for the ROM

[Gazman]

I have a problem with my tab that means it will not flash anything at all no
Matter what combinations of buttons are pressed or what tf card is inserted and not even if
I include auto script. But if instead of pressing buttons to turn it on I
Simply plug it in it works(auto script needed of course) this may work for you.

[F&LSuperstore]

NicolasQ, on 15 February 2013 - 05:38 AM, said:

yep, done that and re-done this about 10 times so far, and no luck.. see screenshots (maybe I am doing something wrong....)
2013-02-15 20_36_08-Removable Disk (H_).png

2013-02-15 20_36_38-zt-update.png

Try using a 4gb card if you can.

[Christian Troy]

bledad, on 16 February 2013 - 12:31 PM, said:

PS:Thank you Christian Troy for the ROM

I don't have any usb gps dongle but first you have to see if it's supported by pl2303 / ftdi_sio / cp21x usb2serial modules, then you have to be sure that ttyUSB0 is the correct device.

[bledad]

Christian Troy, on 17 February 2013 - 01:13 AM, said:

I don't have any usb gps dongle but first you have to see if it's supported by pl2303 / ftdi_sio / cp21x usb2serial modules, then you have to be sure that ttyUSB0 is the correct device.

yes i'm sure , with

dmesg | grep cp21*

<6>[ 1859.361820@1] cp210x 1-1:1.0: cp210x converter detected
<6>[ 1859.773105@0] usb 1-1: cp210x converter now attached to ttyUSB0

[Christian Troy]

stty is run as root?

[bledad]

Christian Troy, on 17 February 2013 - 03:47 AM, said:

stty is run as root?

yes

[Christian Troy]

I have no clue, there should be omaharun that uses a USB GPS let's see what he says.
I never have plugged one, i just offer the kernel support for it.