Jump to content


Photo

[rom] CyanogenMod 10.1 for C97 / C93 (update 2013-05-18)


  • Please log in to reply
451 replies to this topic

#161 Christian Troy

Christian Troy

    Advanced Member

  • FW Developer
  • PipPipPip
  • 6,709 posts

Posted 14 February 2013 - 08:37 AM

in fact, the zt bootloader flashes kernel and recovery when you use the VOL+ and POWER trigger. After that it boots to the freshly flashed recovery

If you appreciate my work and would like to support me with a donation you can follow this link. Thank you very much.

* Actions ATM7029 - CM10.2 - CM10.1 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3)
* Allwinner A31 - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Amlogic 8726-MX - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - CM9 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Allwinner A10 - CM10 - CM9 - AOKP

tmF4C.png


#162 kristake

kristake

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 39 posts
  • LocationRomania

Posted 14 February 2013 - 08:51 AM

Christian, please tell me if you know: because i want to try games like Temple Runner, Rail Rush and others now must to flash again Aokp 4.2 or cm10.1 or Paranoid 4.2( right now I have on my c97 cm10), it's about the fixed g sensor(for that,many thanks). The major problem with jb 4.2 is the online tv apps, black screen( i think you know that on the AOKP topic). Do you know, this problem is resolved?
Zenithink ZTPad C97 Paranoid v3

#163 Christian Troy

Christian Troy

    Advanced Member

  • FW Developer
  • PipPipPip
  • 6,709 posts

Posted 14 February 2013 - 09:43 AM

It should be fixed, Netflix at least works so I guess the other will too

If you appreciate my work and would like to support me with a donation you can follow this link. Thank you very much.

* Actions ATM7029 - CM10.2 - CM10.1 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3)
* Allwinner A31 - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Amlogic 8726-MX - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - CM9 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Allwinner A10 - CM10 - CM9 - AOKP

tmF4C.png


#164 kristake

kristake

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 39 posts
  • LocationRomania

Posted 14 February 2013 - 05:09 PM

Thanks, the tv online apps works great now. I try Temple Runner, the game run perfect.The g sensor it's ok now but only tilt left and right. I try a simulator plane, the tilt up or down doesn't works.
Zenithink ZTPad C97 Paranoid v3

#165 Christian Troy

Christian Troy

    Advanced Member

  • FW Developer
  • PipPipPip
  • 6,709 posts

Posted 15 February 2013 - 12:21 AM

That might be a limit of the memsic g sensor. Probably because comes bundled with other sensors that take care of z axis, but zenithink to cut costs doesn't include them.

If you appreciate my work and would like to support me with a donation you can follow this link. Thank you very much.

* Actions ATM7029 - CM10.2 - CM10.1 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3)
* Allwinner A31 - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Amlogic 8726-MX - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - CM9 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Allwinner A10 - CM10 - CM9 - AOKP

tmF4C.png


#166 NicolasQ

NicolasQ

    Newbie

  • Jr. Member
  • Pip
  • 8 posts

Posted 15 February 2013 - 05:38 AM

put the zt-update folder(extract the common zip) to the root of microsd. Are you sure if you do that right?


yep, done that and re-done this about 10 times so far, and no luck.. see screenshots (maybe I am doing something wrong....)
Attached File  2013-02-15 20_36_08-Removable Disk (H_).png   48.6KB   24 downloads

Attached File  2013-02-15 20_36_38-zt-update.png   24.6KB   21 downloads

#167 NicolasQ

NicolasQ

    Newbie

  • Jr. Member
  • Pip
  • 8 posts

Posted 15 February 2013 - 05:40 AM

in fact, the zt bootloader flashes kernel and recovery when you use the VOL+ and POWER trigger. After that it boots to the freshly flashed recovery


so any reason this is not working, and what could I try to make it do this???

thanks in advance for any help you can provide

#168 CBpbxEcmecmBeH

CBpbxEcmecmBeH

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 63 posts

Posted 15 February 2013 - 05:44 AM

yep, done that and re-done this about 10 times so far, and no luck.. see screenshots (maybe I am doing something wrong....)
Attached File  2013-02-15 20_36_08-Removable Disk (H_).png   48.6KB   24 downloads

Attached File  2013-02-15 20_36_38-zt-update.png   24.6KB   21 downloads

I had once a problem like that.. can you check the difference between command and command.first_install files and if they're the same just rename the latter to the former and try again.. that solved it for me, but I didn't understand the reason why it wouldn't work.. Also try formatting the memory card, before putting the zt-update folder in AND the "rom".zip AND the "gapps".zip in the ROOT directory of the card.
ZeniThink c97: testing...

#169 Christian Troy

Christian Troy

    Advanced Member

  • FW Developer
  • PipPipPip
  • 6,709 posts

Posted 15 February 2013 - 05:54 AM

try to use a small sized 2 gb microsd FAT formatted, with just one partition

If you appreciate my work and would like to support me with a donation you can follow this link. Thank you very much.

* Actions ATM7029 - CM10.2 - CM10.1 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3)
* Allwinner A31 - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Amlogic 8726-MX - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - CM9 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Allwinner A10 - CM10 - CM9 - AOKP

tmF4C.png


#170 NicolasQ

NicolasQ

    Newbie

  • Jr. Member
  • Pip
  • 8 posts

Posted 16 February 2013 - 07:24 AM

I had once a problem like that.. can you check the difference between command and command.first_install files and if they're the same just rename the latter to the former and try again.. that solved it for me, but I didn't understand the reason why it wouldn't work.. Also try formatting the memory card, before putting the zt-update folder in AND the "rom".zip AND the "gapps".zip in the ROOT directory of the card.


Thanks for the advice... tried and now luck... sadly :-/

#171 NicolasQ

NicolasQ

    Newbie

  • Jr. Member
  • Pip
  • 8 posts

Posted 16 February 2013 - 07:28 AM

try to use a small sized 2 gb microsd FAT formatted, with just one partition


Yep, it seems it does not read the high capacity cards, as I have tried all the once I have and neither seem to work (16GB and up), but I do not have any lower capacity cards, seems I may have to buy a 2GB card as one I have no longer works (e.g. cant even copy files onto it)...

will try and then advice on success or otherwise

#172 CBpbxEcmecmBeH

CBpbxEcmecmBeH

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 63 posts

Posted 16 February 2013 - 10:50 AM

Thanks for the advice... tried and now luck... sadly :-/

So, what did you do exactly? I find it hard to believe it's not working once you follow the procedure...
Can try with a different ROM? Like 10.0 or AOKP

Greets

Sent from my Nexus 7 using Tapatalk HD
ZeniThink c97: testing...

#173 bledad

bledad

    Member

  • Jr. Member
  • PipPip
  • 12 posts
  • LocationFrance

Posted 16 February 2013 - 12:31 PM

sorry for this intrusion
hello

i've try put my usb dongle gps on c93 tablet
i put rom CyanogenMod 10.1 of C.Troy 2013-01-26
my driver it's ok in ttyUSB0 with cp210x
but if make : stty -F /dev/ttyUSB0 ispeed 9600 or stty -F /dev/ttyUSB0 9600
result stty -F /dev/ttyUSB0 -a
speed 0 baud; line = 0;

you can help
thank you


PS:Thank you Christian Troy for the ROM

#174 Gazman

Gazman

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 213 posts

Posted 16 February 2013 - 02:03 PM

I have a problem with my tab that means it will not flash anything at all no
Matter what combinations of buttons are pressed or what tf card is inserted and not even if
I include auto script. But if instead of pressing buttons to turn it on I
Simply plug it in it works(auto script needed of course) this may work for you.
ZT283_H6_1F_1GB_Android_4.1_0222G_V1.9_By PAS.

#175 F&LSuperstore

F&LSuperstore

    Advanced Member

  • Authorized Business Seller (ABS)
  • PipPipPip
  • 1,026 posts
  • LocationTampa Bay, FL

Posted 16 February 2013 - 07:27 PM

yep, done that and re-done this about 10 times so far, and no luck.. see screenshots (maybe I am doing something wrong....)
Attached File  2013-02-15 20_36_08-Removable Disk (H_).png   48.6KB   24 downloads

Attached File  2013-02-15 20_36_38-zt-update.png   24.6KB   21 downloads


Try using a 4gb card if you can.
Posted Image
Frank, President
F&L Superstore - www.flsuperstore.com
email: frank@flsuperstore.com
blog: flsuperstore.wordpress.com
MSN: flsuperstore@gmail.com

#176 Christian Troy

Christian Troy

    Advanced Member

  • FW Developer
  • PipPipPip
  • 6,709 posts

Posted 17 February 2013 - 01:13 AM

PS:Thank you Christian Troy for the ROM


I don't have any usb gps dongle but first you have to see if it's supported by pl2303 / ftdi_sio / cp21x usb2serial modules, then you have to be sure that ttyUSB0 is the correct device.

If you appreciate my work and would like to support me with a donation you can follow this link. Thank you very much.

* Actions ATM7029 - CM10.2 - CM10.1 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3)
* Allwinner A31 - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Amlogic 8726-MX - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - CM9 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Allwinner A10 - CM10 - CM9 - AOKP

tmF4C.png


#177 bledad

bledad

    Member

  • Jr. Member
  • PipPip
  • 12 posts
  • LocationFrance

Posted 17 February 2013 - 02:56 AM

I don't have any usb gps dongle but first you have to see if it's supported by pl2303 / ftdi_sio / cp21x usb2serial modules, then you have to be sure that ttyUSB0 is the correct device.

yes i'm sure , with
dmesg | grep cp21*
<6>[ 1859.361820@1] cp210x 1-1:1.0: cp210x converter detected
<6>[ 1859.773105@0] usb 1-1: cp210x converter now attached to ttyUSB0


#178 Christian Troy

Christian Troy

    Advanced Member

  • FW Developer
  • PipPipPip
  • 6,709 posts

Posted 17 February 2013 - 03:47 AM

stty is run as root?

If you appreciate my work and would like to support me with a donation you can follow this link. Thank you very much.

* Actions ATM7029 - CM10.2 - CM10.1 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3)
* Allwinner A31 - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Amlogic 8726-MX - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - CM9 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Allwinner A10 - CM10 - CM9 - AOKP

tmF4C.png


#179 bledad

bledad

    Member

  • Jr. Member
  • PipPip
  • 12 posts
  • LocationFrance

Posted 17 February 2013 - 04:20 AM

stty is run as root?

yes

#180 Christian Troy

Christian Troy

    Advanced Member

  • FW Developer
  • PipPipPip
  • 6,709 posts

Posted 17 February 2013 - 04:25 AM

I have no clue, there should be omaharun that uses a USB GPS let's see what he says.
I never have plugged one, i just offer the kernel support for it.

If you appreciate my work and would like to support me with a donation you can follow this link. Thank you very much.

* Actions ATM7029 - CM10.2 - CM10.1 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3)
* Allwinner A31 - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Amlogic 8726-MX - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - CM9 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Allwinner A10 - CM10 - CM9 - AOKP

tmF4C.png