[mentis]

what is wrong?

U-Boot 2012.04.01-gef96cd0-dirty (Jun 20 2012 - 00:57:41) Allwinner Technology 

CPU:   SUNXI Family
Board: A10-EVB
DRAM:  496 MiB
MMC:   SUNXI SD/MMC: 0
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0 
reading evb.bin

42740 bytes read
reading uImage

4001544 bytes read
## Booting kernel from Legacy Image at 48000000 ...
   Image Name:   Linux-3.0.8+
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4001480 Bytes = 3.8 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

DRAM: 1024[    0.000000] Linux version 3.0.8+ (mentis@c0re) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #1 PREEMPT Mon Dec 10 12:06:35 CET 2012
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: sun4i
[    0.000000] Total Detected Memory: 1024MB with 2 banks
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Memory Reserved(in bytes):
[    0.000000]  LCD: 0x5a000000, 0x02000000
[    0.000000]  SYS: 0x43000000, 0x00010000
[    0.000000]  G2D: 0x58000000, 0x01000000
[    0.000000]  VE : 0x44000000, 0x05000000
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 245760
[    0.000000] free_area_init_node: node 0, pgdat c07ae920, node_mem_map c0975000
[    0.000000]   Normal zone: 1280 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 146176 pages, LIFO batch:31
[    0.000000]   HighMem zone: 768 pages used for memmap
[    0.000000]   HighMem zone: 97536 pages, LIFO batch:31
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 243712
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 init=/init loglevel=8 rootfstype=ext4 rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 448MB 512MB = 960MB total
[    0.000000] Memory: 850080k/850080k available, 132960k reserved, 393216K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
[    0.000000]     vmalloc : 0xe8800000 - 0xf0000000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe8000000   ( 640 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .init : 0xc0008000 - 0xc002f000   ( 156 kB)
[    0.000000]       .text : 0xc002f000 - 0xc0768770   (7398 kB)
[    0.000000]       .data : 0xc076a000 - 0xc07b89f8   ( 315 kB)
[    0.000000]        .bss : 0xc07b8a1c - 0xc0974078   (1774 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:96 nr_irqs:96 96
[    0.000000] timer0: Periodic Mode
[    0.000000] Console: colour dummy device 80x30
[    0.000000] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
[    0.040000] pid_max: default: 32768 minimum: 301
[    0.040000] Mount-cache hash table entries: 512
[    0.040000] CPU: Testing write buffer coherency: ok
[    0.040000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    0.040000] devtmpfs: initialized
[    0.040000] print_constraints: dummy: 
[    0.040000] NET: Registered protocol family 16
[    0.040000] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.040000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
[    0.040000] Initialize DMAC OK
[    0.040000] bio: create slab <bio-0> at 0
[    0.040000] SCSI subsystem initialized
[    0.040000] usbcore: registered new interface driver usbfs
[    0.040000] usbcore: registered new interface driver hub
[    0.040000] usbcore: registered new device driver usb
[    0.040000] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.040000] Bluetooth: Core ver 2.16
[    0.040000] NET: Registered protocol family 31
[    0.040000] Bluetooth: HCI device and connection manager initialized
[    0.040000] Bluetooth: HCI socket layer initialized
[    0.040000] Bluetooth: L2CAP socket layer initialized
[    0.040000] Bluetooth: SCO socket layer initialized
[    0.040000] cfg80211: Calling CRDA to update world regulatory domain
[    0.040000] Init eGon pin module V2.0
[    0.040000] Switching to clocksource aw 64bits couter
[    0.040000] FS-Cache: Loaded
[    0.040000] CacheFiles: Loaded
[    0.050000] Switched to NOHz mode on CPU #0
[    0.050000] [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
[    0.050000] [sw_hcd0]: usb host driver initialize........
[    0.050000] [sw_hcd0]: open_usb_clock
[    0.060000] [sw_hcd0]: host_init_state = 0
[    0.060000] [sw_hcd0]: platform is usb host
[    0.060000] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
[    0.060000] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
[    0.060000] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
[    0.060000] hub 1-0:1.0: USB hub found
[    0.060000] hub 1-0:1.0: 1 port detected
[    0.060000] wrn: hcd is not enable, need not start hcd
[    0.060000] [sw_hcd0]: sw_usb_host0_disable start
[    0.060000] -------sw_hcd0_soft_disconnect---------
[    0.060000] [sw_hcd_host0]: Set USB Power OFF
[    0.060000] wrn: hcd is not enable, need not stop hcd
[    0.060000] [sw_hcd0]: close_usb_clock
[    0.060000] [sw_hcd0]: sw_usb_host0_disable end
[    0.060000] [sw_udc]: udc_init: version 20080411
[    0.060000] NET: Registered protocol family 2
[    0.060000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.060000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.070000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[    0.070000] TCP: Hash tables configured (established 131072 bind 65536)
[    0.070000] TCP reno registered
[    0.070000] UDP hash table entries: 512 (order: 1, 8192 bytes)
[    0.070000] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[    0.070000] NET: Registered protocol family 1
[    0.070000] RPC: Registered named UNIX socket transport module.
[    0.070000] RPC: Registered udp transport module.
[    0.070000] RPC: Registered tcp transport module.
[    0.070000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.070000] [pm]aw_pm_init!
[    0.080000] highmem bounce pool size: 64 pages
[    0.080000] ashmem: initialized
[    0.090000] VFS: Disk quotas dquot_6.5.2
[    0.090000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.090000] NTFS driver 2.1.30 [Flags: R/W].
[    0.090000] fuse init (API version 7.16)
[    0.090000] msgmni has been set to 892
[    0.090000] cryptomgr_test used greatest stack depth: 6672 bytes left
[    0.100000] cryptomgr_test used greatest stack depth: 6388 bytes left
[    0.100000] cryptomgr_test used greatest stack depth: 6280 bytes left
[    0.100000] alg: No test for stdrng (krng)
[    0.100000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.100000] io scheduler noop registered
[    0.100000] io scheduler deadline registered
[    0.100000] io scheduler cfq registered (default)
[    0.100000] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.120000] serial8250.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
[    0.760000] console [ttyS0] enabled
[    0.770000] [uart]: used uart info.: 0x01
[    0.790000] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
[    0.800000] [uart]: serial probe 0, membase   (null) irq 1 mapbase 0x01c28000
[    0.810000] G2D: drv_g2d_init
[    0.810000] G2D: g2dmem: g2d_start=58000000, g2d_size=1000000
[    0.810000] G2D: head:d8000000,tail:d9000000
[    0.820000] G2D: Module initialized.major:251
[    0.820000] brd: module loaded
[    0.830000] loop: module loaded
[    0.830000] [NAND]nand driver, init.
[    0.840000] [NAND] nand gpio_request
[    0.840000] [NAND] nand driver version: 0x2 0x9 
[    0.840000] nand interrupte register ok
[    0.850000] ret of NFC_ChangMode is 0 
[    0.850000] dma_hdle  is 0 
[    0.850000] dma_hdle  is 10000008 
[    0.860000] [ccmu] set nfc clock rate to 60000000 failed!
[    0.860000] [NAND] nand_set_module_clk fail 
[    0.870000] [NAND]init_blklayer fail 
[    0.870000] PPP generic driver version 2.4.2
[    0.880000] PPP Deflate Compression module registered
[    0.880000] PPP BSD Compression module registered
[    0.890000] PPP MPPE Compression module registered
[    0.890000] NET: Registered protocol family 24
[    0.900000] PPTP driver version 0.8.5
[    0.900000] wemac Ethernet Driver, V1.00 in file:drivers/net/sun4i/sun4i_wemac.c
[    0.910000] can't get information emac_power gpio
[    0.910000] [EMAC] ahb clk enable 
[    0.920000] [EMAC] ahb gate clk: 0x26140 
[    0.930000] wemac wemac.0: PHY SETUP, reg 0 value: 0
[    0.940000] emac MAC isn't valid!
[    0.940000] wemac wemac.0: resetting device
[    0.940000] release temp resource
[    0.950000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.950000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.960000] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc0869a84
[    0.970000] [sw-ehci1]: open clock
[    0.990000] [sw-ehci1]: Set USB Power ON
[    1.000000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.000000] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
[    1.010000] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
[    1.040000] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
[    1.040000] hub 2-0:1.0: USB hub found
[    1.040000] hub 2-0:1.0: 1 port detected
[    1.050000] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc0869b94
[    1.060000] [sw-ohci1]: open clock
[    1.080000] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    1.090000] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
[    1.090000] sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
[    1.160000] hub 3-0:1.0: USB hub found
[    1.160000] hub 3-0:1.0: 1 port detected
[    1.170000] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc0869ca8
[    1.180000] [sw-ehci2]: open clock
[    1.200000] [sw-ehci2]: Set USB Power ON
[    1.200000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.210000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
[    1.220000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
[    1.240000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
[    1.240000] ehci_irq: port change detect
[    1.240000] hub 4-0:1.0: USB hub found
[    1.250000] hub 4-0:1.0: 1 port detected
[    1.250000] [sw-ehci2]: sw_usb_disable_ehci
[    1.260000] [sw-ehci2]: remove, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc0869ca8
[    1.260000] sw-ehci sw-ehci.2: remove, state 1
[    1.270000] usb usb4: USB disconnect, device number 1
[    1.280000] sw-ehci sw-ehci.2: USB bus 4 deregistered
[    1.280000] [sw-ehci2]: Set USB Power OFF
[    1.280000] [sw-ehci2]: close clock
[    1.290000] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc0869db8
[    1.300000] [sw-ohci2]: open clock
[    1.320000] [sw-ohci2]: Set USB Power ON
[    1.320000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    1.330000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
[    1.340000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
[    1.400000] hub 4-0:1.0: USB hub found
[    1.400000] hub 4-0:1.0: 1 port detected
[    1.410000] [sw-ohci2]: sw_usb_disable_ohci
[    1.410000] [sw-ohci2]: remove, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc0869db8
[    1.420000] sw-ohci sw-ohci.2: remove, state 1
[    1.420000] usb usb4: USB disconnect, device number 1
[    1.430000] sw-ohci sw-ohci.2: USB bus 4 deregistered
[    1.430000] [sw-ohci2]: Set USB Power OFF
[    1.440000] [sw-ohci2]: close clock
[    1.440000] Initializing USB Mass Storage driver...
[    1.450000] usbcore: registered new interface driver usb-storage
[    1.450000] USB Mass Storage support registered.
[    1.460000] usbcore: registered new interface driver ums-alauda
[    1.460000] usbcore: registered new interface driver ums-cypress
[    1.470000] usbcore: registered new interface driver ums-datafab
[    1.480000] usbcore: registered new interface driver ums_eneub6250
[    1.480000] usbcore: registered new interface driver ums-freecom
[    1.490000] usbcore: registered new interface driver ums-isd200
[    1.490000] usbcore: registered new interface driver ums-jumpshot
[    1.500000] usbcore: registered new interface driver ums-karma
[    1.510000] usbcore: registered new interface driver ums-onetouch
[    1.510000] usbcore: registered new interface driver ums-realtek
[    1.520000] usbcore: registered new interface driver ums-sddr09
[    1.520000] usbcore: registered new interface driver ums-sddr55
[    1.530000] usbcore: registered new interface driver ums-usbat
[    1.540000] usbcore: registered new interface driver usbserial
[    1.540000] usbserial: USB Serial Driver core
[    1.550000] USB Serial support registered for GSM modem (1-port)
[    1.550000] usbcore: registered new interface driver option
[    1.560000] option: v0.7.2:USB Driver for GSM modems
[    1.560000] ------print_msc_config-----
[    1.570000] vendor_id             = 0x18d1
[    1.570000] mass_storage_id       = 0x1
[    1.570000] adb_id                = 0x2
[    1.580000] usb_manufacturer_name = USB Developer
[    1.580000] usb_product_name      = Android
[    1.590000] usb_serial_number     = 20080411
[    1.590000] msc_vendor_name       = Topwise
[    1.600000] msc_product_name      = Advanced
[    1.600000] msc_release           = 100
[    1.600000] luns                  = 2
[    1.610000] ---------------------------
[    1.610000] [sw_udc]: [sw_usb_udc]: binding gadget driver 'android_usb'
[    1.620000] [sw_udc]: alloc request: ep(0xc0795e68, ep0, 64), req(0xe7b12fc0)
[    1.630000] WRN:L2703(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active
[    1.630000] [sw_udc]: sw_udc_pullup, is_on = 0
[    1.640000] WRN:L2738(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active
[    1.650000] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    1.650000] android_usb gadget: Number of LUNs=2
[    1.660000]  lun0: LUN: removable file: (no medium)
[    1.660000]  lun1: LUN: removable file: (no medium)
[    1.670000] lun name: lun
[    1.670000] lun name: lun1
[    1.670000] WRN:L2703(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active
[    1.680000] android_usb gadget: android_usb ready
[    1.690000] mousedev: PS/2 mouse device common for all mice
[    1.690000] input: sun4i-keyboard as /devices/virtual/input/input0
[    1.700000] ==register_early_suspend =
[    1.700000] sunxi RTC version 0.1 
[    1.710000] sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380239881
[    1.710000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
[    1.720000] sunxi-rtc sunxi-rtc: read time 2012-12-10 17:59:3
[    1.720000] using rtc device, rtc, for alarms
[    1.730000] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
[    1.730000] i2c /dev entries driver
[    1.740000] !!! base_Addr = 0xe88bec00 
[    1.740000] config i2c gpio with gpio_config api 
[    1.750000] twi0, apb clock = 24000000 
[    1.750000] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
[    1.760000] [AXP]axp driver uning configuration failed(323)
[    1.760000] [AXP]power_start = 0
[    1.770000] I2C: i2c-0: AW16XX I2C adapter
[    1.770000] **********start************
[    1.770000] 0x40 
[    1.780000] 0xf8 
[    1.780000] 0x28 
[    1.780000] 0x0 
[    1.780000] 0x0 
[    1.780000] **********end************
[    1.790000] !!! base_Addr = 0xe8912000 
[    1.790000] twi1, apb clock = 24000000 
[    1.800000] I2C: i2c-1: AW16XX I2C adapter
[    1.800000] **********start************
[    1.800000] 0x40 
[    1.810000] 0xf8 
[    1.810000] 0x58 
[    1.810000] 0x0 
[    1.810000] 0x0 
[    1.810000] **********end************
[    1.820000] !!! base_Addr = 0xe8914400 
[    1.820000] twi2, apb clock = 24000000 
[    1.830000] I2C: i2c-2: AW16XX I2C adapter
[    1.830000] **********start************
[    1.830000] 0x40 
[    1.830000] 0xf8 
[    1.840000] 0x58 
[    1.840000] 0x0 
[    1.840000] 0x0 
[    1.840000] **********end************
[    1.850000] lirc_dev: IR Remote Control driver registered, major 249 
[    1.850000] IR NEC protocol handler initialized
[    1.860000] IR RC5(x) protocol handler initialized
[    1.860000] IR RC6 protocol handler initialized
[    1.870000] IR JVC protocol handler initialized
[    1.870000] IR Sony protocol handler initialized
[    1.880000] IR RC5 (streamzap) protocol handler initialized
[    1.880000] IR LIRC bridge handler initialized
[    1.890000] Linux video capture interface: v2.00
[    1.890000] [cedar dev]: install start!!!
[    1.890000] [cedar dev]: install end!!!
[    1.900000] [ace_drv] start!!!
[    1.900000] [ace_drv] init end!!!
[    1.910000] [pa_drv] start!!!
[    1.910000] [pa_drv] init end!!!
[    1.910000] print_constraints: axp20_ldo1: 1300 mV 
[    1.920000] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV 
[    1.930000] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV 
[    1.930000] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV 
[    1.940000] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV 
[    1.950000] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV 
[    1.950000] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV 
[    1.960000] input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
[    1.980000] [AXP]axp driver uning configuration failed(1579)
[    1.980000] [AXP]pmu_suspendpwroff_vol = 3500
[    2.000000] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    2.010000] device-mapper: multipath: version 1.3.0 loaded
[    2.010000] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.020000] device-mapper: multipath queue-length: version 0.1.0 loaded
[    2.020000] device-mapper: multipath service-time: version 0.2.0 loaded
[    2.030000] Bluetooth: HCI UART driver ver 2.2
[    2.040000] Bluetooth: HCI H4 protocol initialized
[    2.040000] Bluetooth: HCI BCSP protocol initialized
[    2.050000] Bluetooth: HCILL protocol initialized
[    2.050000] cpuidle: using governor ladder
[    2.050000] cpuidle: using governor menu
[    2.060000] [mmc_pm]: no sdio card used in configuration
[    2.060000] [mmc]: sunximmc_init
[    2.070000] 
[    2.070000] 
[    2.070000] insmod_device_driver
[    2.070000] 
[    2.070000] [sw_udc]: [mmc]: sunxi mmc controller using config : 0x1
[    2.080000] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
[    2.090000] sw_usb_device_enable start
[    2.090000] [sw_udc]: usb_vbase  = 0xf1c13000
[    2.100000] [mmc]: mmc 0 power off !!
[    2.100000] [mmc]: mmc0 Probe: base:0xe891c000 irq:32 dma:0 pdes:0xe7b74000, ret 0.
[    2.110000] [sw_udc]: sram_vbase = 0xf1c00000
[    2.110000] [sw_udc]: open_usb_clock
[    2.120000] usbcore: registered new interface driver usbhid
[    2.120000] usbhid: USB HID core driver
[    2.140000] logger: created 256K log 'log_main'
[    2.140000] logger: created 256K log 'log_events'
[    2.140000] logger: created 256K log 'log_radio'
[    2.160000] logger: created 256K log 'log_system'
[    2.160000] enter sun4i Audio codec!!!
[    2.160000] sun4i audio support initialized
[    2.170000] [sw_udc]: audiocodec_adap_awxx_init: script_parser_fetch err. 
[    2.180000] sun4i Audio codec successfully loaded..
[    2.190000] usbd_stop_work
[    2.190000] [sw_udc]: sw_usb_device_enable end
[    2.190000] asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
[    2.200000] ALSA device list:
[    2.200000]   #0: sun4i-CODEC  Audio Codec
[    2.210000]   #1: sun4i-sndhdmi
[    2.210000] Netfilter messages via NETLINK v0.30.
[    2.220000] nf_conntrack version 0.5.0 (13282 buckets, 53128 max)
[    2.220000] ctnetlink v0.93: registering with nfnetlink.
[    2.230000] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    2.230000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    2.240000] IPv4 over IPv4 tunneling driver
[    2.240000] GRE over IPv4 demultiplexor driver
[    2.250000] GRE over IPv4 tunneling driver
[    2.250000] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.260000] TCP cubic registered
[    2.260000] Initializing XFRM netlink socket
[    2.270000] NET: Registered protocol family 10
[    2.270000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    2.280000] IPv6 over IPv4 tunneling driver
[    2.280000] NET: Registered protocol family 17
[    2.290000] NET: Registered protocol family 15
[    2.290000] Bluetooth: RFCOMM TTY layer initialized
[    2.300000] Bluetooth: RFCOMM socket layer initialized
[    2.300000] Bluetooth: RFCOMM ver 1.11
[    2.310000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.310000] Bluetooth: BNEP filters: protocol multicast
[    2.320000] L2TP core driver, V2.0
[    2.320000] PPPoL2TP kernel driver, V2.0
[    2.320000] L2TP IP encapsulation support (L2TPv3)
[    2.330000] L2TP netlink interface
[    2.330000] L2TP ethernet pseudowire support (L2TPv3)
[    2.340000] [mmc_pm]: No sdio card, please check your config !!
[    2.340000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    2.350000] [LCD] lcd_module_init
[    3.000000] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
[    3.010000] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
[    3.010000] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
[    3.020000] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
[    3.030000] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
[    3.040000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
[    3.040000] sunxi-rtc sunxi-rtc: read time 2012-12-10 17:59:5
[    3.050000] sunxi-rtc sunxi-rtc: setting system clock to 2012-12-10 17:59:05 UTC (1355162345)
[    3.060000] Waiting for root device /dev/mmcblk0p2...
[    3.100000] [mmc]: mmc 0 detect change, present 1
[    3.400000] [mmc]: mmc 0 power on !!
[    3.440000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 52,  RTO !!
[    3.440000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 52,  RTO !!
[    3.450000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5,  RTO !!
[    3.460000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5,  RTO !!
[    3.470000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5,  RTO !!
[    3.480000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5,  RTO !!
[    3.520000] mmc0: new high speed SDHC card at address 1234
[    3.520000] mmcblk0: mmc0:1234 SA04G 3.63 GiB 
[    3.530000]  mmcblk0: p1 p2 p3 < p5 p6 p7 p8 >
[    3.620000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.630000] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    3.640000] devtmpfs: mounted
[    3.640000] Freeing init memory: 156K
[    3.730000] init: cannot open '/initlogo.rle'
[   18.020000] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   18.030000] init: Unable to open persistent property directory /data/property errno: 2
[   18.040000] init used greatest stack depth: 6176 bytes left
[   18.050000] init: cannot find '/system/bin/servicemanager', disabling 'servicemanager'
[   18.060000] init: cannot find '/system/bin/vold', disabling 'vold'
[   18.060000] init: cannot find '/system/bin/netd', disabling 'netd'
[   18.070000] init: cannot find '/system/bin/debuggerd', disabling 'debuggerd'
[   18.080000] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
[   18.080000] init: cannot find '/system/bin/surfaceflinger', disabling 'surfaceflinger'
[   18.090000] init: cannot find '/system/bin/app_process', disabling 'zygote'
[   18.100000] init: cannot find '/system/bin/drmserver', disabling 'drm'
[   18.110000] init: cannot find '/system/bin/mediaserver', disabling 'media'
[   18.110000] init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
[   18.120000] init: cannot find '/system/bin/installd', disabling 'installd'
[   18.130000] init: cannot find '/system/bin/keystore', disabling 'keystore'
[   18.130000] [mmc_pm]: No sdio card, please check your config !!
[   18.250000] init: cannot find '/system/bin/sh', disabling 'console'
[   18.260000] android_usb: already disabled
[   18.260000] adb_bind_config
[   18.270000] ep_matches, wrn: endpoint already claimed, ep(0xc0795ea8, 0xe7b1ab80, ep1-bulk)
[   18.280000] [sw_udc]: alloc request: ep(0xc0795ee8, ep2-bulk, 512), req(0xe70286c0)
[   18.290000] [sw_udc]: alloc request: ep(0xc0795ea8, ep1-bulk, 512), req(0xe7028700)
[   18.300000] [sw_udc]: alloc request: ep(0xc0795ea8, ep1-bulk, 512), req(0xe7028740)
[   18.300000] [sw_udc]: alloc request: ep(0xc0795ea8, ep1-bulk, 512), req(0xe7028780)
[   18.310000] [sw_udc]: alloc request: ep(0xc0795ea8, ep1-bulk, 512), req(0xe70287c0)
[   18.320000] [sw_udc]: sw_udc_pullup, is_on = 1
[   18.320000] [sw_udc]: CONFIG_USB_GADGET_DUALSPEED
[   18.330000] [sw_udc]: usbd_start_work
[   18.350000] warning: `adbd' uses 32-bit capabilities (legacy support in use)
[   18.360000] adb_open
[   18.390000] [sw_udc]: IRQ: suspend
[   18.390000] [sw_udc]: ERR: usb speed is unkown
[   18.490000] [sw_udc]: IRQ: reset
[   18.490000] [sw_udc]: irq: reset happen, throw away all urb
[   18.590000] [sw_udc]: 
[   18.590000] +++++++++++++++++++++++++++++++++++++
[   18.590000] [sw_udc]:  usb enter high speed.
[   18.590000] [sw_udc]: 
[   18.590000] +++++++++++++++++++++++++++++++++++++
[   18.610000] android_work: sent uevent USB_STATE=CONNECTED
[   18.620000] [sw_udc]: IRQ: reset
[   18.620000] [sw_udc]: irq: reset happen, throw away all urb
[   18.710000] [sw_udc]: Set address 33
[   18.720000] android_usb gadget: high speed config #1: android
[   18.720000] [sw_udc]: ep enable: ep1(0xc0795ea8, ep1-bulk, 128, 512)
[   18.720000] [sw_udc]: ep enable: ep2(0xc0795ee8, ep2-bulk, 0, 512)
[   18.740000] android_work: sent uevent USB_STATE=CONFIGURED

[Lannig]

You have a kernel, presumably an initrd root filesystem with init but no /system that has the commands init wants to run.