Jump to content


Photo

CyanogenMod 10.1 (JB 4.2) / AOKP 4.2 / PA 3+ compatibility zip for Crystal


  • Please log in to reply
354 replies to this topic

#81 Christian Troy

Christian Troy

    Advanced Member

  • FW Developer
  • PipPipPip
  • 6,715 posts

Posted 06 January 2013 - 04:36 AM

@saeid
I don't know what to say, I don't have the device so I can't replicate the problem.

If you appreciate my work and would like to support me with a donation you can follow this link. Thank you very much.

* Actions ATM7029 - CM10.2 - CM10.1 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3)
* Allwinner A31 - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Amlogic 8726-MX - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - CM9 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Allwinner A10 - CM10 - CM9 - AOKP

tmF4C.png


#82 saeid

saeid

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 104 posts

Posted 07 January 2013 - 04:12 AM

@saeid
I don't know what to say, I don't have the device so I can't replicate the problem.

thanks any way christian I wait to update comp for crystal maybe then cm work on my device


thanks for reply

#83 miskz

miskz

    Member

  • Jr. Member
  • PipPip
  • 15 posts

Posted 07 January 2013 - 05:44 AM

Stock firmware 1119 works on my batch 3 Crystal, I think mine came with it originally but I'm not sure. Hope this helps.

#84 Christian Troy

Christian Troy

    Advanced Member

  • FW Developer
  • PipPipPip
  • 6,715 posts

Posted 07 January 2013 - 06:20 AM

flsuperstore's came with a mid december firware, still unreleased, and they won't work with any other firmware <_<

If you appreciate my work and would like to support me with a donation you can follow this link. Thank you very much.

* Actions ATM7029 - CM10.2 - CM10.1 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3)
* Allwinner A31 - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Amlogic 8726-MX - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - CM9 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Allwinner A10 - CM10 - CM9 - AOKP

tmF4C.png


#85 Miziel

Miziel

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 36 posts
  • LocationPoland

Posted 07 January 2013 - 09:47 AM

@up No. My 121208 came with 1119 ;)

Maybe here is a difference? That people who had dec ROM orginally cant flash anything because of brick and people with 1119 on start have only non working g-sensor? :)
Motorola Defy &
Ainol Crystal 121208

#86 Christian Troy

Christian Troy

    Advanced Member

  • FW Developer
  • PipPipPip
  • 6,715 posts

Posted 08 January 2013 - 12:31 AM

I guess that flsuperstore's crystal are even a different batch, they were in short supply and go figure wtf did they put inside these things :rofl:

If you appreciate my work and would like to support me with a donation you can follow this link. Thank you very much.

* Actions ATM7029 - CM10.2 - CM10.1 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3)
* Allwinner A31 - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Amlogic 8726-MX - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - CM9 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Allwinner A10 - CM10 - CM9 - AOKP

tmF4C.png


#87 Yvanna

Yvanna

    Member

  • Jr. Member
  • PipPip
  • 26 posts
  • LocationNew Zealand

Posted 08 January 2013 - 01:19 AM

flsuperstore's came with a mid december firware, still unreleased, and they won't work with any other firmware <_<

Thats the two I have ... Probably both dated 18th Dec - certainly the going one is ... :rolleyes:

#88 saeid

saeid

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 104 posts

Posted 08 January 2013 - 02:21 AM

I guess that flsuperstore's crystal are even a different batch, they were in short supply and go figure wtf did they put inside these things :rofl:

I think ainol build every crystal whit different hardware

Edited by saeid, 08 January 2013 - 02:23 AM.


#89 Yvanna

Yvanna

    Member

  • Jr. Member
  • PipPip
  • 26 posts
  • LocationNew Zealand

Posted 08 January 2013 - 01:37 PM

I think ainol build every crystal whit different hardware

Dunno about that ... I didn't think there were that many different ones before now ... but I haven't had my mitts on more than the very last lot so I wouldn't know :)

I guess that flsuperstore's crystal are even a different batch, they were in short supply and go figure wtf did they put inside these things :rofl:

This is pretty much what I had figured. The two I got for my sons were ordered from the Ainol website just after they got stock back in in December. Unfortunately they ran out of stock again before they could fill the new orders.
I was a little curious at the time to note that I had two sent out even though they never showed Crystals as back in stock on the website. I suppose I should have realised then that they had probably put together whatever was at hand ...

#90 hovercat

hovercat

    Newbie

  • Jr. Member
  • Pip
  • 7 posts

Posted 10 January 2013 - 11:45 AM

Hi christian , I don't know what's wrong I install 1119 every thing ok then I try http://www.slatedroi...by-fuser-invent this whit crystal_clear_batch2_compatibility_v1.3.zip every thing ok ,then I want to try cm 10 again when I use compatibility 1.0.3(old batch)sensor and camera not working and display had broken color ,when use 1.7 sensor and camera not working,and after use for a while (like play game) screen freeze so I have to restart tablet but display ok (no broken color) ,finally when use 1.1 for new batch every thing ok but display had broken colorsI just want to ask can you put some file from com 1.1 to 1.7 to every thing work please or change comp 1.3 from crystal clear by fuser to work whit cm10 ?I post broken colors problem few days agaobroken colors : http://www.slatedroi..._p__470241sorry I post to much I really want this rom thanks for great rom


i have the same problem, broken color mostly on bright white colors but only on the half of the screen. my crystal is batch 2 and this problem occurred when i use the CM10 ROM with 1.1 compatibility (i havent tried the other compatibilities). on the stock 1119 ROM and crystal clear 1.3 the broken color is gone. i'll try the CM10.1 and see if the broken color still appeared.

#91 miskz

miskz

    Member

  • Jr. Member
  • PipPip
  • 15 posts

Posted 10 January 2013 - 02:26 PM

And now, for a surprise, CM10.1 actually works on my 121208 Crystal. CM10 had broken auto rotation and camera and I have gone back to stock 1119. I was bored today so I tried newer one with batch 2 compatibility zip like before.

Still, if your Crystal came with new firmware (dated after 121208) you will probably brick your device. If you have already confirmed that you can flash stuff then go ahead and try it :)

Thanks, Christian!

Edited by miskz, 10 January 2013 - 02:34 PM.


#92 saeid

saeid

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 104 posts

Posted 10 January 2013 - 07:59 PM

i have the same problem, broken color mostly on bright white colors but only on the half of the screen. my crystal is batch 2 and this problem occurred when i use the CM10 ROM with 1.1 compatibility (i havent tried the other compatibilities). on the stock 1119 ROM and crystal clear 1.3 the broken color is gone. i'll try the CM10.1 and see if the broken color still appeared.

I check aokp and cm10.1 problem still there but you right only on the half of the screen ,I don't know what happen on cm or aokp

#93 Christian Troy

Christian Troy

    Advanced Member

  • FW Developer
  • PipPipPip
  • 6,715 posts

Posted 12 January 2013 - 06:23 AM

2013-01-12

* Updated upstream sources

Rom (md5sum)
Multi-User package

If you appreciate my work and would like to support me with a donation you can follow this link. Thank you very much.

* Actions ATM7029 - CM10.2 - CM10.1 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3)
* Allwinner A31 - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Amlogic 8726-MX - OmniRom 4.4 - CM11 - CM10.2 - CM10.1 - CM10 - CM9 - AOKP (4.3) - AOKP (4.2) - ParanoidAndroid (4.3) - ParanoidAndroid (4.2)
* Allwinner A10 - CM10 - CM9 - AOKP

tmF4C.png


#94 Mt Everest

Mt Everest

    Member

  • Jr. Member
  • PipPip
  • 23 posts

Posted 12 January 2013 - 11:28 AM

Do I need to wipe dataa, every time to install updated ROM?


How do I update to the latest ROM version "2013-01-12" without losing any apps, data and settings. While updating from "2012-12-29" to "2013-01-05", first, I flashed the update, then the compatibility zip 1.0 and then Gapps 2012-12-12, but the system became so laggy, jerky, wifi didn't work eihter. I had to factory wipe, delete cache and dalvik and install all over again, then the system became like silk smooth and everything working again. but of course, I had to restore everything, taking so much time.

Is there any easier way to do it?

Any help is appreciated!

#95 ljlj

ljlj

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 38 posts

Posted 12 January 2013 - 01:38 PM

How do I update to the latest ROM version "2013-01-12" without losing any apps, data and settings. While updating from "2012-12-29" to "2013-01-05", first, I flashed the update, then the compatibility zip 1.0 and then Gapps 2012-12-12, but the system became so laggy, jerky, wifi didn't work eihter. I had to factory wipe, delete cache and dalvik and install all over again, then the system became like silk smooth and everything working again. but of course, I had to restore everything, taking so much time.

Is there any easier way to do it?

Any help is appreciated!


Flash rom, flash comp zip, wipe cache and dalvik cache, reboot.

#96 yash_072

yash_072

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 75 posts

Posted 19 January 2013 - 02:34 PM

I have a Batch 3 crystal with grady.wang kernel and everything is working great :yahoo: :yahoo: no bugs at all i dint flash the multiuser zip as i dont need it..rest all camera,g sensors,screen working great :yahoo: :clapping: :clapping: just a small bug when i was setting up facelock and holded the tab right front of me the image of my face was always coming upside down no matter how i hold it :( but still rest all works great :)

Enjoying CM10.1 :drinks:

#97 tigger-gg

tigger-gg

    Advanced Member

  • FW Developer
  • PipPipPip
  • 143 posts

Posted 19 January 2013 - 03:07 PM

I have a Batch 3 crystal with grady.wang kernel and everything is working great :yahoo: :yahoo: no bugs at all i dint flash the multiuser zip as i dont need it..rest all camera,g sensors,screen working great :yahoo: :clapping: :clapping: just a small bug when i was setting up facelock and holded the tab right front of me the image of my face was always coming upside down no matter how i hold it :( but still rest all works great :)

Enjoying CM10.1 :drinks:

To be clear, your crystal is the batch 3 1208 not the 1212.

i have some questions...you released compatibility for batch 3 does that mean no matter what kernel version you have you can flash it?
my crystal status
android ver-4.1.1
kernel ver-3.0.8-g710665b-dirty.wang@
droid07-sz))#8 SMP PREEMPT Mon Nov 19
10:29:54 CST 2012
Build Number- 20121119 Serial No- 121208Gxxxxx
Firmware- 1119
status- Stock and Rooted with crystal root patch.

is it safe to flash CM10/10.1 on it with the new compatibility zip?

1212 is that which will be bricked if you flash an custom ROM.
Motorola Milestone
HTC HD2
Samsung Galaxy S3
Ainol Novo Crystal 7 (batch 2/ 121108)
Pipo M8

#98 yash_072

yash_072

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 75 posts

Posted 19 January 2013 - 03:25 PM

To be clear, your crystal is the batch 3 1208 not the 1212.


1212 is that which will be bricked if you flash an custom ROM.

No batch 3 has 2 variants 1 with grady.wang kernel(its said to be slightly modified batch 2) and a chengten.tan kernel(More modified in simple words)whos bootloader is locked down and cannot flash and will brick :)

I just flashed this rom and is running completely fine no bugs at all... :yahoo: except the face locking

#99 tigger-gg

tigger-gg

    Advanced Member

  • FW Developer
  • PipPipPip
  • 143 posts

Posted 19 January 2013 - 03:28 PM

No batch 3 has 2 variants ..

And what I wrote above? Or is my english so bad?
Motorola Milestone
HTC HD2
Samsung Galaxy S3
Ainol Novo Crystal 7 (batch 2/ 121108)
Pipo M8

#100 yash_072

yash_072

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 75 posts

Posted 19 January 2013 - 03:33 PM

And what I wrote above? Or is my english so bad?

Oops my bad i got the other way :p i want to ask a question...in this rom there are options for bluetooth and stuff which our tab does not have like the network signal icon in the notification bar...do we have more clean OS for our tab where the things not specified for our tab are not there :)