Jump to content


Photo

[ROM]Cyanogen 10 for RK3066 W.i.P


  • Please log in to reply
158 replies to this topic

#41 osgema

osgema

    Member

  • Jr. Member
  • PipPip
  • 25 posts

Posted 15 December 2012 - 12:04 PM

Well, I had hope to see something different.
Does Android or busybox has lsmod? Could you try it?
Also, could you try "ifconfig wlan0 down" then "ifconfig wlan0 up" to see if wireless module loads up?

I wanna see if the problem is related to wireless card or something else.
Thanks.


I made it to
ifconfig wlan0 down
ifconfig wlan0 up
but still the same.

I do not understand what you mean
Does Android or busybox has lsmod? Could you try it?


#42 tschertel

tschertel

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 30 posts

Posted 15 December 2012 - 12:29 PM

I made it to
ifconfig wlan0 down
ifconfig wlan0 up
but still the same.

I do not understand what you mean

Does Android or busybox has lsmod? Could you try it?


"lsmod" lists all loaded modules.
We can use it to compare his output with output from another working RK3066 tablet's lsmod.
This will show us if the problem is a missing module.
Seems like wirless board is up and runnig. So I'm trying to figure out what's happening. Maybe other parte of network stack.

#43 darkrickpr

darkrickpr

    Advanced Member

  • FW Developer
  • PipPipPip
  • 1,802 posts

Posted 15 December 2012 - 12:46 PM

lsmod is showing all modules except rkwifi.ko and wlan.ko. i load them with insmod but still no working

# lsmod
lsmod

rk29_ipp 9541 0 - Live 0x00000000 (C)

mali 121577 16 - Live 0x00000000

ump 37214 25 mali, Live 0x00000000

rk30xxnand_ko 887171 0 - Live 0x00000000

root@android:/ #

insmod /system/lib/modules/rkwifi.ko and now is loaded but still cannot turn on the wifi

wlan 383921 0 - Live 0x00000000
rk29_ipp 9541 0 - Live 0x00000000 (C)

mali 121577 16 - Live 0x00000000

ump 37214 25 mali, Live 0x00000000

rk30xxnand_ko 887171 0 - Live 0x00000000

Edited by darkrickpr, 15 December 2012 - 12:49 PM.

My Allwinner A31 Custom Roms
Nextway F9X
JENOVA ROM
-------------------------------------------------------------------------------
My Rk3188 Custom Roms
97RQ N90FHDRK U9GT5,VISTURE V97HD
Glass ROM
Aoson M33
Mist ROM
Aishon A97 7.9inch
Custom Rom
--------------------------------------------------------------------------------
My RK3066 Custom Roms
CUBE U20GT
GENERICK MOD RC3 , SKYDIVER , CUBEX ,JELLYCUBE
PIPO MAX M1- AOSON M11 - PIPO U1
GENERICK MOD v7
ICOO - D70PROII
Darkwater v2
PLOYER MOMO8 SPEED IPS
VINCENT ROM V1
CHUWI V99, VIDO N90FHD, Cube U9GTV, VISTURE 4HD RK3066 RETINA ROMS ONLY
DANERICK ROM, LUNATIC, MetroBleach


Check Out my Webpage www.andydarkroom.site90.com


Darkrickpr EASY ADB BATCH TOOL (RELEASED TEST 1 CHECK MY WEBPAGE)
( Is your Tablet STUCK in BOOT animation, your volume key wont help you get to CWM or Bootloader. You don't know how to use adb shell commands. Then this it the tool you will need


HOW TO INSTALL MY ROMS ON CWM RECOVERY

HOW TO INSTALL CWM RECOVERY ON RK3066 RETINA TABLET VIDEO

Buy Me A Beer CLICK HERE


#44 osgema

osgema

    Member

  • Jr. Member
  • PipPip
  • 25 posts

Posted 15 December 2012 - 02:22 PM

CM10

$ adb shell lsmod
vpu_service 11791 0 - Live 0x00000000
rk29_ipp 9541 0 - Live 0x00000000 (C)
mali 121577 8 - Live 0x00000000
ump 37214 9 mali, Live 0x00000000
rk30xxnand_ko 882634 0 - Live 0x00000000

Bq Edison

$ adb shell lsmod
vpu_service 11791 0 - Live 0xbf122000
rk29_ipp 9541 0 - Live 0xbf11c000 (C)
mali 121577 8 - Live 0xbf0f1000
ump 37214 9 mali, Live 0xbf0e1000
rk30xxnand_ko 882634 0 - Live 0xbf000000


#45 tschertel

tschertel

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 30 posts

Posted 15 December 2012 - 02:55 PM

Oh my...
Something is missing here...
When I get home I'll google a bit about this...
Maybe other CM ports had same erors.

#46 tschertel

tschertel

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 30 posts

Posted 15 December 2012 - 07:39 PM

I'vĂȘ found this:
Setting up networking on bootup

Add the following lines in the init.rc:
service ethernet /eth0.sh
Now create a file at the root (or anywhere else, probably in /system/etc but modify the above line accordingly) called eth0.sh, make it executable (chmod +x eth0.sh) and put the following lines in it:
#!/system/bin/sh

netcfg eth0 dhcp

setprop net.dns1 8.8.8.8

Could you please make sure CM has something line that?
And you could use one of these logging tipos:
http://elinux.org/An..._Logging_System

Edited by tschertel, 15 December 2012 - 07:44 PM.


#47 murigny64

murigny64

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 65 posts

Posted 16 December 2012 - 05:55 AM

Wifi work on Yzipro !

I take firmware folder and libhardware.legacy from Cherry M1038 4.1.1 (the most compatible).
I take sensors.rk30board from my 4.0.4 stock rom.

Only one bug: artefacts when rotate.

#48 tschertel

tschertel

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 30 posts

Posted 16 December 2012 - 11:36 AM

I'll compare CM folders with stock ROM folders. Try to find any clue on what's going on.

#49 marcoshdhdh

marcoshdhdh

    Member

  • Jr. Member
  • PipPip
  • 18 posts

Posted 16 December 2012 - 11:49 AM

hi this rom will work on momo 7 in future? thanks for the ward work guys!

#50 tschertel

tschertel

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 30 posts

Posted 16 December 2012 - 12:25 PM

hi this rom will work on momo 7 in future? thanks for the ward work guys!


Hi Marcos.
It should work with all RK3066 devices.
Take a look on first post. You have to use stock kernel with this CM port.

#51 murigny64

murigny64

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 65 posts

Posted 16 December 2012 - 12:51 PM

hi this rom will work on momo 7 in future? thanks for the ward work guys!


You can try, like us ;)

#52 marcoshdhdh

marcoshdhdh

    Member

  • Jr. Member
  • PipPip
  • 18 posts

Posted 16 December 2012 - 02:48 PM

how to do that? i flashed a updated rom other day but is only one file...where is the kernel? i dont know and first i need to do a full backup and i dont know how...can u guys help me?

#53 osgema

osgema

    Member

  • Jr. Member
  • PipPip
  • 25 posts

Posted 16 December 2012 - 03:29 PM

Now I have the wifi working.
Copy the libhardware_legacy.so the Curie Bq (4.1.1) that more or less are the same and it works.
Now I need to work on bluetooth

#54 murigny64

murigny64

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 65 posts

Posted 16 December 2012 - 04:15 PM

Do you have artefacts on rotate ?

#55 osgema

osgema

    Member

  • Jr. Member
  • PipPip
  • 25 posts

Posted 16 December 2012 - 04:35 PM

Do you have artefacts on rotate ?

Yes. At the moment I work everything but the bluetooth and hdmi not I get the option in settings

#56 murigny64

murigny64

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 65 posts

Posted 17 December 2012 - 01:29 AM

Yes. At the moment I work everything but the bluetooth and hdmi not I get the option in settings


Ok, same issue. And no release in future :(

Very bad bench:

Antutu 3 = 8500 (stock4.0.4 = 11600)

Edited by murigny64, 17 December 2012 - 04:18 AM.


#57 osgema

osgema

    Member

  • Jr. Member
  • PipPip
  • 25 posts

Posted 17 December 2012 - 05:16 AM

Ok, same issue. And no release in future :(

Very bad bench:

Antutu 3 = 8500 (stock4.0.4 = 11600)


Yes, very bad. And some FC's

#58 tschertel

tschertel

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 30 posts

Posted 17 December 2012 - 07:24 AM

Now I have the wifi working.
Copy the libhardware_legacy.so the Curie Bq (4.1.1) that more or less are the same and it works.
Now I need to work on bluetooth


Oscar,

Could you post here the output of lsmod?
I wanna compare it with previous output. Thanks.

#59 osgema

osgema

    Member

  • Jr. Member
  • PipPip
  • 25 posts

Posted 17 December 2012 - 08:09 AM

Oscar,

Could you post here the output of lsmod?
I wanna compare it with previous output. Thanks.


Tonight when I do get home and upload it.
Now I'm at work

#60 murigny64

murigny64

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 65 posts

Posted 17 December 2012 - 01:19 PM

No way for CM9 wifi.

For CM9 and CM10: no hwcomposer source = bad performance