Android Tablets Forum banner

Finally use LiveSuitPack with Windows 8

49K views 3 replies 4 participants last post by  leove 
#1 · (Edited by Moderator)
Hey there
try to install any official version of android from your pc to ainol tab using window8
and you will get that massage no driver installed

this made me installing windows 7 side with windows 8 just for LiveSuitPack_v1.07
now no more of that
the proplem is that windows 8 doesnot support installing unsupported drivers
so follow those steps and every thing will be ok
First Download any version of live suit pack
try this one for example
From This Link
Or maybe try This One
2 extract files anywhere on your pc
3- follow those few steps before starting the prog

1.move your mouse corser to the upper right part on the screen
then select settings ->change pc settings->choose General -> Under "Advanced Startup" -> Restart now.

Now the system will restart and might take some minutes to show up the boot menu. Wait for It patiently.

After some time you will be prompted with a menu with following options.

1. Continue

2. Troubleshoot

3. Turn off

Choose Troubleshoot

Then the following menu appears.

Refresh your PC
Reset your PC
Advanced Options

Choose Advanced Options

Then the following menu appears

System Restore
System Image Recovery
Automatic Repair
Command Prompt
Windows Startup settings
Choose Windows Startup Settings, then Click Restart.

Now the computer will restart and the boot menu appears. Choose "Disable Driver signature Enforcement" from the menu. Now windows will start and you can do the installation of the driver that is not signed.

Now start the program By Clicking LiveSuitPack_v1.07 This will install the missing driver
then connect your ainol advanced II tab by pressing back key then connect usb then press power buttom 5 times reaptedly
then
enjooooooooooooooy
 
See less See more
2
#2 ·
There is an easier way.

Search for command prompt, right click and choose run as administrator

Then in the new command prompt type

Bcdedit.exe -set TESTSIGNING ON

And press enter,

You will need to reboot.

When you restart windows 8 will have a watermark stating test mode on the desktop.

Use livesuit and install drivers.

To turn off test mode, follow the same instructions but use

Bcdedit.exe -set TESTSIGNING OFF

Again reboot nd job done.
 
#4 ·
There is an easier way.

Search for command prompt, right click and choose run as administrator

Then in the new command prompt type

Bcdedit.exe -set TESTSIGNING ON

And press enter,

You will need to reboot.

When you restart windows 8 will have a watermark stating test mode on the desktop.

Use livesuit and install drivers.

To turn off test mode, follow the same instructions but use

Bcdedit.exe -set TESTSIGNING OFF

Again reboot nd job done.
That's the solution to my problem.

Thanks a lot !!!!!!!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top