Jump to content


Photo

AML FLASH TOOL aka ImageBurnTool


  • Please log in to reply
118 replies to this topic

#101 CK420

CK420

    Newbie

  • Jr. Member
  • Pip
  • 2 posts

Posted 16 September 2013 - 03:05 PM

Hey guys, I was hoping that someone could help me out.

I have an ONDA V711D V1 and I accidentally flashed the wrong firmware and wifi and accelerometer didnt work. I couldn't get Windows to recognize the tablet but finally after many many hours of trying I eventually opened the tablet to short out the TF-Pins and cut the Red Battery Wire and yesterday I had gotten Windows to finally recognize it as M6 and I installed the "World Cup Device" driver.

Not sure if it matters, but I had taped the Home button in because I had no way to do everything at once (Short Pins with metal, and press Home + Power buttons all at once). Taping the Home button in, I was able to test out each and every pin until Windows finally recognized it.

I then used AML Flash Tool to attempt to flash the "V711D_v2.0.rar" firmware for V1 tablets and no matter what it keeps stopping at 75% (home button was held in the whole time during flash because i forgot to take the tape off).

At this point, and Im not really sure if it is normal or not, but I can unlug and plug the tablet in without pressing any buttons and it always detects "World Cup Device" in Windows XP. I have a black screen and no backlight. I left it overnight unplugged and tried again this morning and the same thing happened without having to press anything. World Cup Device is detected and the flash stops at 75%.

I am using Windows XP S3 Black Edition in English and in Device Manager, unchecked the "power save" for all USB Root Hubs. Not sure is Black Edition matters as well.


Here is my log. If anybody could help me out it would be much muuuuch appreciated. I just wish I can get it working again, like normal. Thanks so much. If I am leaving out any helpful info please let me know. Thanks again.


Saving log to: log\usb_2013-09-16-08-42-56.log System: Microsoft Windows XP
Tool version: v1.6.22
W/ Import upgrade file C:\V711D_v2.0\USB-Burning-tool-v1.6.22\resources\Resource.V711D_v2.0.zip
W/ [P1][08:44:16]Loading spl ...
W/ [P1][08:44:16]Transfer Complete! total size is 18472 Bytes


E/ [P1][08:44:17]Spl code,identy(-1)
E/ [P1][08:44:17]Load uboot failed 1 times


E/ [P1][08:44:18]Spl code,identy(-1)
E/ [P1][08:44:18]Load uboot failed 2 times


E/ [P1][08:44:19]Spl code,identy(-1)
E/ [P1][08:44:19]Load uboot failed 3 times


E/ [P1][08:44:21]Spl code,identy(-1)
E/ [P1][08:44:21]Load uboot failed 4 times
E/ [P1][08:44:21]Load uboot failed 3 times, retry from 0 step


W/ [P1][08:44:22]Loading spl ...
W/ [P1][08:44:22]before loadSpl, identify return -1


W/ [P1][08:44:23]Loading spl ...
W/ [P1][08:44:23]before loadSpl, identify return -1


W/ [P1][08:44:24]Loading spl ...
W/ [P1][08:44:24]before loadSpl, identify return -1


W/ [P5][08:44:23]Loading spl ...
W/ [P5][08:44:23]Identify return 8 ,slip load spl


W/ [P1][08:44:25]Loading spl ...
W/ [P1][08:44:25]before loadSpl, identify return -1


W/ [P5][08:44:25]Transfer Complete! total size is 518688 Bytes


W/ [P1][08:44:26]Loading spl ...
W/ [P1][08:44:26]before loadSpl, identify return -1


W/ [P1][08:44:27]Loading spl ...
W/ [P1][08:44:27]before loadSpl, identify return -1


W/ [P1][08:44:28]Loading spl ...
W/ [P1][08:44:28]before loadSpl, identify return -1


W/ [P1][08:44:29]Loading spl ...
W/ [P1][08:44:29]before loadSpl, identify return -1


W/ [P1][08:44:30]Loading spl ...
W/ [P1][08:44:30]before loadSpl, identify return -1


W/ [P1][08:44:31]Loading spl ...
W/ [P1][08:44:31]before loadSpl, identify return -1


W/ [P1][08:44:32]Loading spl ...
W/ [P1][08:44:32]before loadSpl, identify return -1


W/ [P1][08:44:33]Loading spl ...
W/ [P1][08:44:33]before loadSpl, identify return -1


W/ [P1][08:44:34]Loading spl ...
W/ [P1][08:44:34]before loadSpl, identify return -1


W/ [P1][08:44:35]Loading spl ...
W/ [P1][08:44:35]before loadSpl, identify return -1


W/ [P1][08:44:36]Loading spl ...
W/ [P1][08:44:36]before loadSpl, identify return -1


W/ [P1][08:44:37]Loading spl ...
W/ [P1][08:44:37]before loadSpl, identify return -1


W/ [P1][08:44:38]Loading spl ...
W/ [P1][08:44:38]before loadSpl, identify return -1


W/ [P1][08:44:39]Loading spl ...
W/ [P1][08:44:39]before loadSpl, identify return -1


W/ [P1][08:44:40]Loading spl ...
W/ [P1][08:44:40]before loadSpl, identify return -1


W/ [P1][08:44:41]Loading spl ...
W/ [P1][08:44:41]before loadSpl, identify return -1


W/ [P1][08:44:42]Loading spl ...
W/ [P1][08:44:42]before loadSpl, identify return -1
E/ [P1][08:44:42]Load spl failed 20 times,maybe because rom code cannot run


E/ [P1][08:44:43]failed because no connected device ,current step is 0


W/ [P5][08:44:51]Cmd --> (set_chgcur 0)(0)
W/ [P5][08:44:51]Cmd --> (video dev bl_off)(0)
W/ [P5][08:44:51]Cmd --> (video dev disable)(0)


W/ [P5][08:44:51]Cmd --> (sf probe 2)(0)
W/ [P5][08:44:52]Cmd --> (sf erase 0 100000)(0)


W/ [P5][08:45:12]Cmd --> (nand erase 4000000)(0)


W/ [P5][08:45:25]Cmd --> (defenv)(0)


W/ [P5][08:45:25]Cmd --> (setenv bootargs ${bootargs} a9_clk_max=600000000)(0)


W/ [P5][08:45:26]Cmd --> (cmd_in_mem 0x82000000)(0)
W/ [P5][08:45:26]Cmd --> (save)(0)


W/ [P5][08:45:27]Transfer Complete! total size is 4110336 Bytes


W/ [P5][08:45:28]Cmd --> (bootm 0x82000000)(0)


E/ [P5][08:46:06]failed because no connected device ,current step is 18

Edited by CK420, 17 September 2013 - 07:50 AM.


#102 CK420

CK420

    Newbie

  • Jr. Member
  • Pip
  • 2 posts

Posted 18 September 2013 - 08:54 AM

Anybody have any ideas that i could try? Any help would be much appreciated, thanks.

#103 MIXTERek

MIXTERek

    Newbie

  • Jr. Member
  • Pip
  • 5 posts

Posted 18 September 2013 - 03:58 PM

do you try erase nund and remove sd card?

one more thing when you try to use trick 5,6pins you could connect crumb tin the pins

Edited by MIXTERek, 18 September 2013 - 04:02 PM.


#104 mag21

mag21

    Newbie

  • Jr. Member
  • Pip
  • 1 posts

Posted 21 September 2013 - 10:01 AM

Hi. I have tablet w17pro with amlogic CPU. All OK with the drivers etc , but when i try to load the update.zip file , the tools says 'find no upgrade config please upload it manually'.
The firmware is ICS not JB. Pls help me.

#105 Mike212

Mike212

    Newbie

  • Jr. Member
  • Pip
  • 5 posts

Posted 25 September 2013 - 11:13 AM

Hey guys, I was hoping that someone could help me out.

I have an ONDA V711D V1 and I accidentally flashed the wrong firmware and wifi and accelerometer didnt work. I couldn't get Windows to recognize the tablet but finally after many many hours of trying I eventually opened the tablet to short out the TF-Pins and cut the Red Battery Wire and yesterday I had gotten Windows to finally recognize it as M6 and I installed the "World Cup Device" driver.

Not sure if it matters, but I had taped the Home button in because I had no way to do everything at once (Short Pins with metal, and press Home + Power buttons all at once). Taping the Home button in, I was able to test out each and every pin until Windows finally recognized it.

I then used AML Flash Tool to attempt to flash the "V711D_v2.0.rar" firmware for V1 tablets and no matter what it keeps stopping at 75% (home button was held in the whole time during flash because i forgot to take the tape off).

At this point, and Im not really sure if it is normal or not, but I can unlug and plug the tablet in without pressing any buttons and it always detects "World Cup Device" in Windows XP. I have a black screen and no backlight. I left it overnight unplugged and tried again this morning and the same thing happened without having to press anything. World Cup Device is detected and the flash stops at 75%.

I am using Windows XP S3 Black Edition in English and in Device Manager, unchecked the "power save" for all USB Root Hubs. Not sure is Black Edition matters as well.


Here is my log. If anybody could help me out it would be much muuuuch appreciated. I just wish I can get it working again, like normal. Thanks so much. If I am leaving out any helpful info please let me know. Thanks again.


E/ [P5][08:46:06]failed because no connected device ,current step is 18[/code]


Hi CK420
Maybe this is better news – i was stuck on process 18, 75%.
And i'm using a French edition of Windows 7 64 bit, which goes against the odds, AND i got the aml tool to work.
I used the download from Onda.cn, their Vi40_v2 - for my Vi40 dual core, in which their document advises - turning off the anti-virus and not having anything connected via USB except the tablet.

The trick is to right click on the file - ImageburnTool.exe - where window's menu gives you the option of opening the software 'as an administrator.' ( I don't get offered this option using the aml download from Slate, it's configured a little differently from the Onda download. On my Win 7, at least.) I did it this way and the software behaved totally differently. First time round it went to stage 21 and then stopped there. Two days later i tried it again and it did it 100%. As i understand it, this is what they call 'buggy' software – it behaves differently at times, for no predictable reason.

The other thing in it is that, at stage 18, the aml tool opens up the 16gb (maybe yours is 32gb) drive of the tablet, and i looked at this at the time it succeeded, there was a zip file there (if i remember correctly, it's difficult for me to note the details of this stuff ) and i think maybe that file took it through the last stages. Whole process was about 10 minutes.

In respect of you message (i'm no expert though) once your computer has loaded the driver called 'the world cup', it does not need to reload it the next time the tool is used.

Best of luck.
Mike.

#106 phonofranz

phonofranz

    Newbie

  • Jr. Member
  • Pip
  • 4 posts

Posted 28 September 2013 - 10:30 AM

Hello everybody, hello Valkoz

I know this is an Onda specific thread, but I have a hard bricked Gemei G6T-K8, that is an AML8726-MX based tablet too.
The device is recognized correctly by WordlCup drivers and AML Burning Tool and the whole process is clear.

My issue is that I have only the stock firmwares at hand, but they don't have a config_progress file in them.
Those firmwares where ment to be flashed through an sd card.

Is there any way I can convert those images (eg. edit a config_progress file by myself) to be used in AML Burning Tool ?
Anyone has an AML rescue firmware for Gemei G6 - G6T - K8 ?

Any pointer would be greatly appreciated!

#107 bob42

bob42

    Newbie

  • Jr. Member
  • Pip
  • 3 posts

Posted 18 October 2013 - 02:04 PM

you are my saviour !

running it as administrator is mandatory ... at least on Windows 8

i would like to mention also that to install drivers on windows 8 you have to follow a weird procedure
well described there http://www.makeuseof...s-in-windows-8/

#108 shebu18

shebu18

    Newbie

  • Jr. Member
  • Pip
  • 2 posts

Posted 14 December 2013 - 02:12 PM

Hello, i have a onda v701 V3 and accidentally flashed v7 on it. After i tried to go back to v3 i bricked the tablet. Now the tablet is recognized as WorldCup in device manager but trying to flash it with amlogic burning tool 1.6.22 it stays at loading spl for ever. I tried amlogic 1.6.1 and there i get "write data to ram failed" error. What can i do to unbrick the tabled. I also wanted to write the stuff via jtag to it but i have to programmer and not enough knowledge about it.

#109 moor2

moor2

    Newbie

  • Jr. Member
  • Pip
  • 1 posts

Posted 20 December 2013 - 12:30 PM

Hello, i had to register to ask few questions because im stuck with something,
i´ve done many things myself by reading around researching and so on.

i have tablet labeled as Sencor Element 10.1 with Amlogic 8726-MX
pics: http://imgur.com/rH026WM,IWYZAMu#1

after unsucessful updating i´ve bricked it to point without backlight/contrast blackscreen and no boot / turn on signs.

i followed the total-brick guide here:
http://www.mediafire...v9evxegidlmnvlm

i´ve got to the point where it was like described:
"Progress bar will reach abuot 80%, then you will see the error. It is normal." - check, this happened after previous steps
"After some time (from 30 sec up to 2 min) you will see TWRP recovery menu on your tablet pc display" - nope, i am stuck here, nothing goes on on tablet and its still in non-bootable state

needles to say, i am doing it on WinXP laptop since my Win8.1 PC refused to install Worldcup driver


can someone help me resolve this?

#110 Gustavo Duenas

Gustavo Duenas

    Member

  • Jr. Member
  • PipPip
  • 16 posts

Posted 30 January 2014 - 04:26 PM

Hi do you now if I have to use the flash tool from amlogic, to install the jellybean 4.2.2 on my onda v971 t version v3c, I have the upgrade zip but you said that It will need to be from a sd card....please advice. Actually I have my onda v971t with stock jellybean 4.1.1 my version is v3c so there is an android 4.2.2 for it. Thanks for your help.



#111 frankviana

frankviana

    Newbie

  • Jr. Member
  • Pip
  • 1 posts

Posted 02 February 2014 - 11:22 AM

Hi,

I bought this receiver: [link removed by moderator] and I installed wrong firmware and now I don't have CWM and appear only blue led.

I tried several times and pressed reset button too many many times and different recovers...

I think only jtag to write flash again... but I don't know how. My receiver is Amlogic 8726-M3.

 

I used this informations to recovery using SD card: "Copy aml_autoscript, uImage_recovery (renamed recovery.img), fw of you choice on FAT partition of prepared sdcard plug in box while holding reset button"

My receiver has reset button and I don't know if is the same pins on motherboard.

I used different u-boot.bin and recovery (sdcardmaker, HDDRawCopy1.02Portable) with some images too.

Used this informations too:

"amlogic boxes can boot recovery image from sd.

on most boxes you have to prepare sd with SDcardmaker and your box related (or near related) uboot.bin put on the by SDcardmaker created FAT32 patition: recovery.img (or rename uImage_recovery ) and update.zip, boot with reset pressed."

no sucess too..

I think now is ony by JTAG, but I don't know where I find the softwares. I bought on aliexpress USB to TTL protocol but only few days I'll receive.

See the motherboard:

 

placa_iptv28.jpg

 

Sorry my english.

 

Thanks
====================


Edited by mrsburnout, 02 February 2014 - 11:30 AM.
re-direct not allowed - removed by admin


#112 loryboy

loryboy

    Newbie

  • Jr. Member
  • Pip
  • 1 posts

Posted 08 February 2014 - 10:16 AM

In case you flashed wrong firmware:

1. Download right firmware which uses Image Burn Tool (AML flash)

2. Flash firmware in two steps (first - check "erase nand", after that - with unchecked "erase nand")

That's all

PS. I can post a link to right firmware, but I need to know right model - 701 ... next?

PPS. In case you have right firmware with Image Burn, start firstly on PC "Device manager", after that connect tablet and look, what the new device 'll appear in the Device manager. Long press Power to turn off tablet, new device shall disappear from Device manager. Start Image Burn and follow tutorial in the header

Who can help my?? it gives me an error at 86% bad update 

 

current pc version is: xp

current tool version is: v1.6.1.1228

-----importUpgradeFile-----filenameC:\Users\loryboy\Downloads\v701d-v5_v2.1\Resource.V701D-V5_v2.1.zip

[T 0][17:03:30]: load spl ...

[T 0][17:03:30]: Transfer Complete! total size is 18680 Bytes

[T 0][17:03:39]: load uboot ...

[T 0][17:03:40]: load uboot ...

[T 0][17:03:41]: load uboot ...

[T 0][17:03:42]: load uboot ...

[T 0][17:03:43]: load uboot ...

[T 0][17:03:44]: load uboot ...

[T 0][17:03:45]: load uboot ...

[T 0][17:03:46]: load uboot ...

[T 0][17:03:47]: load uboot ...

[T 0][17:03:48]: load uboot ...

[T 0][17:03:49]: load uboot ...

[T 0][17:03:50]: load uboot ...

[T 0][17:03:51]: load uboot ...

[T 0][17:03:53]: load uboot ...

[T 0][17:03:54]: load uboot ...

[T 0][17:03:55]: load uboot ...

[T 0][17:03:56]: load uboot ...

[T 0][17:03:57]: load uboot ...

[T 1][17:04:14]: load spl ...

[T 1][17:04:15]: load uboot ...

[T 1][17:04:15]: Transfer Complete! total size is 520724 Bytes

[T 1][17:04:21]: test command exec: crc 0x8f800000 520724 2c5c00f1

[T 1][17:04:21]: command exec: crc 0x8f800000 520724 2c5c00f1

[T 1][17:04:21]: sendCommandWithReply: crc 0x8f800000 520724 2c5c00f1 maxCount:30

[T 1][17:04:23]: begin run 8f800000

[T 1][17:04:26]: finish run 8f800000

[T 1][17:04:28]: command exec:set_chgcur 0

[T 1][17:04:29]: command exec:video dev bl_off

[T 1][17:04:30]: command exec:video dev disable

[T 1][17:04:32]: command exec:sf probe 2

[T 1][17:04:33]: command exec:sf erase 0 100000

[T 1][17:04:50]: command exec:defenv

[T 1][17:04:51]: command exec:setenv bootargs ${bootargs} a9_clk_max=600000000

[T 1][17:04:52]: load command: setenv recovery_command --usb_burning

[T 1][17:04:53]: command exec:cmd_in_mem 0x82000000

[T 1][17:04:55]: command exec:save

[T 1][17:04:56]: load uimage ...

[T 1][17:05:00]: Transfer Complete! total size is 4001792 Bytes

[T 1][17:05:06]: test command exec: crc 0x82000000 4001792 9738fe22

[T 1][17:05:06]: command exec: crc 0x82000000 4001792 9738fe22

[T 1][17:05:06]: sendCommandWithReply: crc 0x82000000 4001792 9738fe22 maxCount:30

[T 1][17:05:07]: command exec:bootm 0x82000000

[T 1][17:05:09]: boot uImage ...

[T 1][17:05:44]: find disk: G:

[T 1][17:05:45]: recoveyCommand: wipe_data prepareCommand:

[T 1][17:05:46]: send command : wipe_data ok!

[T 1][17:05:52]: wipe_data success(wipe_data):ok

[T 1][17:05:53]: recoveyCommand: wipe_cache prepareCommand:

[T 1][17:05:53]: send command : wipe_cache ok!

[T 1][17:05:55]: wipe_cache success(wipe_cache):ok

[T 1][17:05:56]: recoveyCommand: copy_media prepareCommand:

[T 1][17:05:57]: recoveyCommand: update:update.zip prepareCommand:

[T 1][17:06:48]: copy successed:update.zip

[T 1][17:06:48]: send command : update:update.zip ok!

[T 1][17:06:51]: update:update.zip failed(update:update.zip):bad

[T 1][17:06:57]: failed ,current step is 20 

 

 

how can y fix  this problem ??



#113 ferozfirru

ferozfirru

    Newbie

  • Jr. Member
  • Pip
  • 1 posts

Posted 11 February 2014 - 10:49 AM

Hello friend,

Does this Amlogic flashtool will work for 3q q-pad tablets???

 

my 3q q-pad lc0725b is hard bricked,accidentally i erased the NAND. Please help me ,my device not at all switching on,but detecting as a worldcup device and also this AMLogic burining flashtool recognising it.But i cant understand what to do next? i have downloaded the original firmware from the tablet manufacturer's website(http://files.3-q.ru/..._fw20130306.zip), but it is saying "no upgrade config please load it manually".

 

please help me friend



#114 mxawsayar

mxawsayar

    Newbie

  • Jr. Member
  • Pip
  • 1 posts

Posted 25 February 2014 - 03:03 AM

my tablet Onda tablet V802 , no backlight , but computer recognize it M3 World cup devices , 

 

i tried to unbrick it , i used 1212_AML_burn_recovery.zip but fail 

 

 

current pc version is: win7

current tool version is: v1.6.2.0128
-----importUpgradeFile-----filenameD:\Mobile\Onda tablet\fire_official_0921_AMLF.zip
-----importUpgradeFile-----filename
-----importUpgradeFile-----filename
[T 3][23:08:49]: load spl ...
[T 3][23:08:50]: Transfer Complete! total size is 18456 Bytes
[23:08:58]: ---------call System  reinstall driver------------
[T 3][23:08:59]: load uboot ...
[T 3][23:09:00]: load uboot ...
[T 3][23:09:01]: load uboot ...
[T 3][23:09:02]: load uboot ...
[T 3][23:09:03]: load uboot ...
[T 3][23:09:04]: load uboot ...
[T 3][23:09:05]: load uboot ...
[T 3][23:09:07]: load uboot ...
[T 3][23:09:08]: load uboot ...
[23:09:08]: ---------call System  reinstall driver------------
[T 3][23:09:09]: load uboot ...
[T 3][23:09:10]: load uboot ...
[T 3][23:09:11]: load uboot ...
[T 3][23:09:12]: load uboot ...
[T 3][23:09:13]: load uboot ...
[T 3][23:09:14]: load uboot ...
[T 3][23:09:16]: load uboot ...
[T 3][23:09:17]: load uboot ...
[T 3][23:09:18]: load uboot ...
[23:09:19]: ---------call System  reinstall driver------------
[T 3][23:09:19]: load uboot ...
[T 3][23:09:20]: load uboot ...
[T 3][23:09:21]: load uboot ...
[T 3][23:09:21]: load uboot failed 15 times,maybe because the spl code run err
[T 3][23:09:22]: failed because no connected device ,current step is 1 
[23:09:29]: ---------call System  reinstall driver------------
[T 3][23:09:32]: load spl ...
[T 3][23:09:34]: load uboot ...
[T 3][23:09:34]: Transfer Complete! total size is 500608 Bytes
[T 3][23:09:52]:  after load uboot, disconnect
[T 3][23:09:55]:  after load uboot, disconnect
[T 3][23:09:57]: wait uboot run ,scan system again!!! 
[T 3][23:09:58]:  after load uboot, disconnect
[T 3][23:10:01]:  after load uboot, disconnect
[T 3][23:10:04]:  after load uboot, disconnect
[T 3][23:10:07]:  after load uboot, disconnect
[T 3][23:10:10]:  after load uboot, disconnect
[T 3][23:10:13]:  after load uboot, disconnect
[T 3][23:10:16]:  after load uboot, disconnect
[T 3][23:10:18]:  wait uboot run failed 35 times, so make it disconnected
[T 3][23:10:19]: failed because no connected device ,current step is 2 
-----importUpgradeFile-----filenameD:\Mobile\Onda tablet\AML_Flash.zip
-----importUpgradeFile-----filenameD:\Mobile\Onda tablet\AML_Flash.zip
-----importConfigFiles-----filenameD:\Mobile\Onda tablet\_USB-Burning-Tool\tmp\AML_Flash\config_progress.xml
[T 3][23:29:19]: load spl ...
[T 3][23:29:19]: can not open the file D:\Mobile\Onda tablet\_USB-Burning-Tool\tmp\AML_Flash\usb_spl.bin
[T 3][23:29:30]: failed ,current step is 1 
-----importUpgradeFile-----filenameD:\Mobile\Onda tablet\1212_AML_burn_recovery.zip
[T 3][23:34:19]: load spl ...
[T 3][23:34:19]: Transfer Complete! total size is 18456 Bytes
[T 3][23:34:28]: load uboot ...
[T 3][23:34:29]: Transfer Complete! total size is 500608 Bytes
[T 3][23:34:57]:  after load uboot, disconnect
[T 3][23:35:00]:  after load uboot, disconnect
[T 3][23:35:02]: wait uboot run ,scan system again!!! 
[T 3][23:35:03]:  after load uboot, disconnect
[T 3][23:35:06]:  after load uboot, disconnect
[T 3][23:35:09]:  after load uboot, disconnect
[T 3][23:35:12]:  after load uboot, disconnect
[T 3][23:35:15]:  after load uboot, disconnect
[T 3][23:35:18]:  after load uboot, disconnect
[T 3][23:35:21]:  after load uboot, disconnect
[T 3][23:35:23]:  wait uboot run failed 35 times, so make it disconnected
[T 3][23:35:25]: failed because no connected device ,current step is 2 
D:/Mobile/Onda tablet/_USB-Burning-Tool/log/02.24.23.36_1212_AML_burn_recovery_manual.log
success:0 failed:1 failed postion:   s2:1

 

 how can i rebrick . plz help me (sorry for my poor english)



#115 GSMHUM

GSMHUM

    Newbie

  • Jr. Member
  • Pip
  • 7 posts

Posted 25 February 2014 - 09:56 AM

how to flash hcl u2 tablet

 

amlogic cpu: amlogic 8726-m3

 

model : u2
android version : 4.0.4
kernel version : 2.6.34
amlogic@droid #605
sat,dec 8,13:22:10 cst 2012
build number : hcl_u2_v1.0_e_20121208
software version : hcl_u2_v1.0_e



#116 rich t

rich t

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 184 posts

Posted 03 March 2014 - 08:44 AM

I have the latest onda v975m which has the m802 chip. Unfortunately my sd slot is broke. Anyone here know how to get to fastboot mode? I have NO way to update my software. Please help. Thanks


V975M for sale. SD slot not working. Like new in box, and is BLACK! PM me.


#117 mynazri

mynazri

    Member

  • Jr. Member
  • PipPip
  • 10 posts

Posted 05 March 2014 - 11:44 PM

There is unbrick kit for Ainol ELF 2 from russian forum 4pda http://4pda.ru/forum...howtopic=352079

attachicon.gif1.jpg

Elf II Unbrick Kit 2.0 https://disk.yandex....21c+MIBEnSRwA0=

 

hi valkoz

 

for this aml flash tool cant use at ainol elf 2?



#118 ahtishamzaheer

ahtishamzaheer

    Newbie

  • Jr. Member
  • Pip
  • 4 posts

Posted 12 March 2014 - 04:36 AM

sir what is boot mode . i mean how to connect tablet with pc ? simple connect to pc or press any button and insert cable ? i have amlogic teclast a80h tablet . it has only buttons similar to volume but they are for back and down one is labeled W . how i connect this tablet  to pc ? its stuck on logo 



#119 giurly

giurly

    Newbie

  • Jr. Member
  • Pip
  • 9 posts

Posted 15 March 2014 - 01:33 PM

Hello

 

I have an Aurora II. Something got wrong trying to upgrade from CM10.2 to CM11. It doesn't go into recovery (I have TWRP 2.6.0.0). I try your solution, but after the successful installation of the "World Cup Device", switching off, opening USB tool 1.6.22 as administrator, restarting tablet with home + power my win 7 PC doesn't see it in device manager. The tablet is on and stucked with green droid. Is there any solution??

 

Thanks in advice.






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users