| ||
Cube U23GT and U23GT-S FIRMWARE DIFFERENT HARDWARE FIRMWARE ROOTED
#21
Posted 06 October 2012 - 10:45 PM
Am really confused between going for this and the yuandao n80 dual core. Would be a great help if someone could point me in the right direction.
Thanks in advance
#22
Posted 07 October 2012 - 01:24 AM
#23
Posted 07 October 2012 - 03:43 PM
#24
Posted 09 October 2012 - 09:25 AM
This post has been edited by metaman1: 09 October 2012 - 09:28 AM
#25
Posted 09 October 2012 - 02:59 PM
#26
Posted 09 October 2012 - 03:29 PM
#27
Posted 10 October 2012 - 09:05 AM
anton51, on 09 October 2012 - 03:29 PM, said:
Well what you are talking about is Window n80 deluxe edition, Google for Window n80 dual core it has rk3066 and 5000 mAh battery and everything else the cube u23gt has.
Only thing I don't like about the Window n80 dual core is that it has three capacitive touch buttons on one of its sides.
This post has been edited by hsmaheen: 10 October 2012 - 09:08 AM
#28
Posted 10 October 2012 - 10:16 AM
hsmaheen, on 10 October 2012 - 09:05 AM, said:
Only thing I don't like about the Window n80 dual core is that it has three capacitive touch buttons on one of its sides.
Oh, yes you are right. I agree, the three buttons on the side don't quite look right.
#29
Posted 11 October 2012 - 11:50 AM
#30
Posted 12 October 2012 - 08:24 AM
I have got this tablet NOT IPS screen that is for sure but not a bad deal for just 125-130 US $.
I have bought it just for resell so i did not touch it too much, very nice speakers, that i can tell, do not have much experience with this devices, so if you want me to run any kind of test, tell me what do you want me to do and i will do it and post the results.
One thing i noticed from the begining, it heats up too fast but i dont take that as a problem, i read the same thing about ainol tablets.
I will try that custom rom thank you.
#31
Posted 13 October 2012 - 08:25 AM
gordomorbido, on 12 October 2012 - 08:24 AM, said:
I have got this tablet NOT IPS screen that is for sure but not a bad deal for just 125-130 US $.
I have bought it just for resell so i did not touch it too much, very nice speakers, that i can tell, do not have much experience with this devices, so if you want me to run any kind of test, tell me what do you want me to do and i will do it and post the results.
One thing i noticed from the begining, it heats up too fast but i dont take that as a problem, i read the same thing about ainol tablets.
I will try that custom rom thank you.
Hello.If you try the rom by arctablet.com let me know if it works well.the thickness of the tablet is ultra thin? It really is 10.2 mm?It is as good as tablet?
the battery is good?
Thanks a lot
#32
Posted 14 October 2012 - 09:08 AM
let me know if you find custom rom
thanks
#33
Posted 14 October 2012 - 09:15 AM
Sent from my HTC VIVID using Tapatalk 2
Nextway F9X
JENOVA ROM
--------------------------------------------------------------------------------
My RK3066 Custom Roms
CUBE U20GT
GENERICK MOD RC3 , SKYDIVER , CUBEX ,JELLYCUBE
PIPO MAX M1- AOSON M11 - PIPO U1
GENERICK MOD v7
ICOO - D70PROII
Darkwater v2
PLOYER MOMO8 SPEED IPS
VINCENT ROM V1
CHUWI V99, VIDO N90FHD, Cube U9GTV, VISTURE 4HD RK3066 RETINA ROMS ONLY
DANERICK ROM, LUNATIC, MetroBleach
CHECK MY DARKROOM BLOG AND DARKRICKPR WEBPAGE
HOW TO INSTALL MY ROMS ON CWM RECOVERY
HOW TO INSTALL CWM RECOVERY ON RK3066 RETINA TABLET VIDEO
WANT TO DONATE? CLICK HERE
#34
Posted 14 October 2012 - 09:51 AM
mikele79, on 13 October 2012 - 08:25 AM, said:
the battery is good?
Thanks a lot
Yes, is that thin, i can´t say about the battery, i was fighting with the Pipo U1 this days (i have received this two at the same time)
I can´t say what is happening with the cube, it´s suppose to have the same chip as the Pipo, but i tried to flash the rom with RKtool and it didn´t recognize the device...while RKtool can recognize the pipo so i don´t know what the problem is....
#35
Posted 14 October 2012 - 10:27 AM
gordomorbido, on 14 October 2012 - 09:51 AM, said:
I can´t say what is happening with the cube, it´s suppose to have the same chip as the Pipo, but i tried to flash the rom with RKtool and it didn´t recognize the device...while RKtool can recognize the pipo so i don´t know what the problem is....
try changing the usb cable that they send along with the tablet is not good.
if you use that.
#36
Posted 14 October 2012 - 01:11 PM
mikele79, on 14 October 2012 - 10:27 AM, said:
if you use that.
I already try three....
The thing is Moborobo don´t have any problem to recognize the tablet....any ideas?
I did exactly the same steps with the Pipo, shut it down push Volume + and connect it to the pc, Rktool reacts immediately with the Pipo but wont do a *freaking thing with the Cube.....and i already check the volume + button and it works so i have no clue...
UPDATE: Forget everything Pipo U1 will get into flash mode just holding volume + and connecting it to the pc, that is enough for the Rk tool to recognize it, but i read in FMA with cube you have to hold volume + and power for two seconds to get into flash mode, that worked, but i am not sure about the rom, i don´t know if i am understanding it cause the google translation is bad but it seems that in the cube forum people are complaining about the 1.0.3 firmware, i have 1.0.2 and works fine.
Is it possible to install CWM recovery in this device to make a backup before flashing this rom? @darkrickpr do you think i can grab the CWM from your generickmod u20gt topic and install it in this device?
This post has been edited by gordomorbido: 14 October 2012 - 04:15 PM
#37
Posted 14 October 2012 - 02:23 PM
Sent from my HTC VIVID using Tapatalk 2
Nextway F9X
JENOVA ROM
--------------------------------------------------------------------------------
My RK3066 Custom Roms
CUBE U20GT
GENERICK MOD RC3 , SKYDIVER , CUBEX ,JELLYCUBE
PIPO MAX M1- AOSON M11 - PIPO U1
GENERICK MOD v7
ICOO - D70PROII
Darkwater v2
PLOYER MOMO8 SPEED IPS
VINCENT ROM V1
CHUWI V99, VIDO N90FHD, Cube U9GTV, VISTURE 4HD RK3066 RETINA ROMS ONLY
DANERICK ROM, LUNATIC, MetroBleach
CHECK MY DARKROOM BLOG AND DARKRICKPR WEBPAGE
HOW TO INSTALL MY ROMS ON CWM RECOVERY
HOW TO INSTALL CWM RECOVERY ON RK3066 RETINA TABLET VIDEO
WANT TO DONATE? CLICK HERE
#38
Posted 15 October 2012 - 04:21 AM
darkrickpr, on 14 October 2012 - 09:15 AM, said:
Sent from my HTC VIVID using Tapatalk 2
So, do you think i could install Finless CWM in this cube u23gt? Sorry about the question but i don't know if this recovery can be installed in any tablet or should be moddified to work on a different model.
#39
Posted 15 October 2012 - 06:34 AM
Sent from my HTC VIVID using Tapatalk 2
This post has been edited by darkrickpr: 15 October 2012 - 06:37 AM
Nextway F9X
JENOVA ROM
--------------------------------------------------------------------------------
My RK3066 Custom Roms
CUBE U20GT
GENERICK MOD RC3 , SKYDIVER , CUBEX ,JELLYCUBE
PIPO MAX M1- AOSON M11 - PIPO U1
GENERICK MOD v7
ICOO - D70PROII
Darkwater v2
PLOYER MOMO8 SPEED IPS
VINCENT ROM V1
CHUWI V99, VIDO N90FHD, Cube U9GTV, VISTURE 4HD RK3066 RETINA ROMS ONLY
DANERICK ROM, LUNATIC, MetroBleach
CHECK MY DARKROOM BLOG AND DARKRICKPR WEBPAGE
HOW TO INSTALL MY ROMS ON CWM RECOVERY
HOW TO INSTALL CWM RECOVERY ON RK3066 RETINA TABLET VIDEO
WANT TO DONATE? CLICK HERE
#40
Posted 15 October 2012 - 07:08 AM
Sent from my HTC VIVID using Tapatalk 2
This post has been edited by darkrickpr: 15 October 2012 - 12:48 PM
Nextway F9X
JENOVA ROM
--------------------------------------------------------------------------------
My RK3066 Custom Roms
CUBE U20GT
GENERICK MOD RC3 , SKYDIVER , CUBEX ,JELLYCUBE
PIPO MAX M1- AOSON M11 - PIPO U1
GENERICK MOD v7
ICOO - D70PROII
Darkwater v2
PLOYER MOMO8 SPEED IPS
VINCENT ROM V1
CHUWI V99, VIDO N90FHD, Cube U9GTV, VISTURE 4HD RK3066 RETINA ROMS ONLY
DANERICK ROM, LUNATIC, MetroBleach
CHECK MY DARKROOM BLOG AND DARKRICKPR WEBPAGE
HOW TO INSTALL MY ROMS ON CWM RECOVERY
HOW TO INSTALL CWM RECOVERY ON RK3066 RETINA TABLET VIDEO
WANT TO DONATE? CLICK HERE
- ← Top Notch Tablets - Cube U21GT - Firmware Release 1
- Cube RK3066 Tablets
- Any Cube U21GT tablet users ? →

Help











