[darkrickpr]

That's strange the working cwm had problem to mount / system and wipe data factory reset ?

Sent from my HTC Holiday using Tapatalk 2

[benhoze]

darkrickpr, on 09 February 2013 - 12:25 PM, said:

That's strange the working cwm had problem to mount / system and wipe data factory reset ?

Sent from my HTC Holiday using Tapatalk 2

yes yes, cant mount system: error mounting system, and at the wipe data factory reset i getting errors too.
On the picture that i attached you can see some errors.

[darkrickpr]

http://androtab.info...ockchip/rk3066/

HERE ARE DIFFRENT RECOVERY THAT MAYBE THE ONE THAT SAY RAMDISK ONYL YOU COULD TRY IT AS ALWAYS REPLACING IT TO THE ONE YOU ALREADY HAVE ON THE RKANDROIDTOOL IS THAT DOESNT WORK THEN THE OTHER COULD BE THE ONE THAT SAY (CUBE U9GT4) OR THE (N70S ) (PIPO S1 )THE ONLY DIFERRENT IS THAT THIS ONE HAS A KERNEL INSIDE THE RECOVERY THAT COULD NOT BE MADE FOR YOUR TABLET BUT I STILL COULD WORK

This post has been edited by darkrickpr: 09 February 2013 - 05:41 PM

[cubeu23gt]

benhoze, on 09 February 2013 - 08:28 AM, said:

With this recovery.img cant load the cwm fist time comes a white-gray screen, cant see anything, then at the next boot dont load anything in. So dont work with this recovery.

I too have the same problem with the new cwm recovery! Please help us ... ARE DESPERATE!

[run_rabbit55]

ive recently just purchased a cube u23gt but i am having battery drain issues which seems to be a common issue. i keep seeing it mention but cant find any answers to the problem. does anyone have a solutionto the issues?

whats the latest firmware for the u23gt and will it sort out the battery drain issues?

[cubeu23gt]

darkrickpr, on 09 February 2013 - 05:28 PM, said:

http://androtab.info...ockchip/rk3066/

HERE ARE DIFFRENT RECOVERY THAT MAYBE THE ONE THAT SAY RAMDISK ONYL YOU COULD TRY IT AS ALWAYS REPLACING IT TO THE ONE YOU ALREADY HAVE ON THE RKANDROIDTOOL IS THAT DOESNT WORK THEN THE OTHER COULD BE THE ONE THAT SAY (CUBE U9GT4) OR THE (N70S ) (PIPO S1 )THE ONLY DIFERRENT IS THAT THIS ONE HAS A KERNEL INSIDE THE RECOVERY THAT COULD NOT BE MADE FOR YOUR TABLET BUT I STILL COULD WORK

Tomorrow morning I'll try and find out ... hopefully risco to solve the problem ... but thanks for everything Darkrickpr for what you're doing

[cubeu23gt]

how to install the recovery? You can spegare step-by-step?

[darkrickpr]

cubeu23gt, on 10 February 2013 - 06:08 PM, said:

how to install the recovery? You can spegare step-by-step?

Download this http://www.mediafire...ahas2boslbh8fwi extract then inside are the drivers and the rkandroidtool put the tablet in flashmode by pressing holding +volume and plugging the tablet to the pc should regonize as rk30device and press flashrom below on my signature I have a video hoy to insatall cwm on retina ist kind the same theory
from my HTC Holiday using Tapatalk 2

[cubeu23gt]

I installed the cwm of pipo s1 and now the tablet does not give any sign of life. Not enter into flash mode. What do I do now?? I'm desperate!

[darkrickpr]

pressing holding +volume and plugging the tablet wont let you get to flash mode ?
did you try using also the power cable after you had plug the usb cable.
doest the tablet show up on the windows device manager on control panel?

This post has been edited by darkrickpr: 11 February 2013 - 08:20 AM

[cubeu23gt]

Nothing. Not more signs of life. I tried but nothing! I think the seller will defer back to me and I will replace it!

[cubeu23gt]

I read on a site for this tablet unbrikkare have to take it apart and connect two contacts! As for the cube u30gt! Do you know how? You know that contacts should I connect? Do you know other methods?

This post has been edited by cubeu23gt: 12 February 2013 - 06:23 AM

[darkrickpr]

cubeu23gt, on 12 February 2013 - 04:38 AM, said:

I read on a site for this tablet unbrikkare have to take it apart and connect two contacts! As for the cube u30gt! Do you know how? You know that contacts should I connect? Do you know other methods?

Yes they are un breakeble did you try with holding - volume and not the +volume and plug the table to the pc it should get it boot to flashmode with blackscreen you will know througt the pc that will regonoze. You have to try many time and have to be sure the tablet is completely off or force to be off could check if you see the screen black but the backlight it on.

Sent from my HTC Holiday using Tapatalk 2

[darkrickpr]

I found this on another forum for you tablet on how to get rkbatch to detect the table give it a try I didn't write the below


"Im not sure about right procedure to enable recovery mode, when I do flash, I connect the USB to both tablet and PC at first, and then i press pwr+vol+ button together – it works (RKbatch device got green). When i tried to enable pwr+vol+ and then connect USB, i get only dead android on the screen and computer did not find any device. Also, how is it? There are many people on the internet, who says it works. But I have to use another method – strange!!!

Sent from my HTC Holiday using Tapatalk 2

[cubeu23gt]

darkrickpr, on 12 February 2013 - 07:45 AM, said:

I found this on another forum for you tablet on how to get rkbatch to detect the table give it a try I didn't write the below


"Im not sure about right procedure to enable recovery mode, when I do flash, I connect the USB to both tablet and PC at first, and then i press pwr+vol+ button together – it works (RKbatch device got green). When i tried to enable pwr+vol+ and then connect USB, i get only dead android on the screen and computer did not find any device. Also, how is it? There are many people on the internet, who says it works. But I have to use another method – strange!!!

Sent from my HTC Holiday using Tapatalk 2

Still nothing! Does not enter in flash mode!
Here's the video:

[darkrickpr]

Try different USB port and open the rkbatchtool and then press the combination button as I mention on the post but press it and hold them like 10sec also you could try to plug the ad adaption to be user the battery is not discharge like I say I don't think is dead yet but looking the video I think that you didn't press it and hold the button for not to long . Also check the device manager to see if adb Android is detected

Sent from my HTC Holiday using Tapatalk 2

[cubeu23gt]

darkrickpr, on 12 February 2013 - 04:30 PM, said:

Try different USB port and open the rkbatchtool and then press the combination button as I mention on the post but press it and hold them like 10sec also you could try to plug the ad adaption to be user the battery is not discharge like I say I don't think is dead yet but looking the video I think that you didn't press it and hold the button for not to long . Also check the device manager to see if adb Android is detected

Sent from my HTC Holiday using Tapatalk 2

I tried to change the port and it worked ... the tablet has been recognized as rk30 device. Rk batch tool recognized him but did not have the rom so I downloaded and meanwhile the tablet is gone and now it does not recognize it once more (I tried all the doors!) What do I do?

[darkrickpr]

cubeu23gt, on 13 February 2013 - 08:10 AM, said:

I tried to change the port and it worked ... the tablet has been recognized as rk30 device. Rk batch tool recognized him but did not have the rom so I downloaded and meanwhile the tablet is gone and now it does not recognize it once more (I tried all the doors!) What do I do?

Is not regonize plug the ac battery maybe dead

Sent from my HTC Holiday using Tapatalk 2

This post has been edited by darkrickpr: 13 February 2013 - 10:08 AM

[cubeu23gt]

darkrickpr, on 13 February 2013 - 09:55 AM, said:

Is not regonize plug the ac battery maybe dead

Sent from my HTC Holiday using Tapatalk 2

I plugged in the charger but nothing more! How can I do? Is there any other solution?

[cubeu23gt]

cubeu23gt, on 13 February 2013 - 10:45 AM, said:

I plugged in the charger but nothing more! How can I do? Is there any other solution?

I managed to get it started and I flashed ... but now it's like before! Wi fi does not work and turns off if not in charge!