[dubbaYous]

Just out of curiosity, is anyone having problems getting play to install purchased programs???

[gTabletOwnerUnite]

Fosser, could you please clarify if we need to "wipe the Cache and Dalvik partitions and power off the tablet" after installing the JB 5.0? I remember reading a previous comment regarding system partition 300M, that due to size limitation, it bad been moved and would be unwise to wipe after the rom install.

The reason I ask is that bit of instruction is still included in the Windows Readme First file included with the 350M NVflash file. It might need updating.

[deuce]

dubbaYous, on 14 August 2012 - 09:07 AM, said:

Just out of curiosity, is anyone having problems getting play to install purchased programs???

Just tried and cannot. Get error that can't install to SD.

[gTabletOwnerUnite]

dubbaYous, on 14 August 2012 - 09:07 AM, said:

Just out of curiosity, is anyone having problems getting play to install purchased programs???

Same. Could be a CM10 thing and here.

This post has been edited by gTabletOwnerUnite: 14 August 2012 - 10:02 AM

[tabback]

deuce, on 14 August 2012 - 09:41 AM, said:

Just tried and cannot. Get error that can't install to SD.

same here/same problem. Anyone having problems installing apk's not through market. I get a parsing error for all I have tried so far

[tsukaza]

tabback, on 14 August 2012 - 09:57 AM, said:

same here/same problem. Anyone having problems installing apk's not through market. I get a parsing error for all I have tried so far

I have to side load a few apk using a file manager that can update root and then shutdown, clean dalvik-cache and reboot to get it to show up.

[Kiwinadian]

No problems using TiB, which seems to load backups just fine. I haven't yet tried sideloading an individual file. As far as market downloads, as the links above state, it is only for purchased content. Free downloads do not seem to be affected at all. I had to use my backup of TiB key to provide donate access, but if you mostly use free apps this shouldn't be an issue. I'm not sure how this will affect updates.

It seems from the link above that this error has been posted to the AOSP, but still has only moderate priority to fix.

[bfoster68]

I believe the issue has to do with App Encryption introduced in Jellybean however I have read Google has disabled that. It was causing lots of problems. Still searching for an answer.

[Kameo]

Awesome, time to give it a try

[dubbaYous]

bfoster68, on 14 August 2012 - 01:18 PM, said:

I believe the issue has to do with App Encryption introduced in Jellybean however I have read Google has disabled that. It was causing lots of problems. Still searching for an answer.

As anything else goes, teamdrh will get it tooken care of, it was fixed in a previous alpha, I just have to be patient.

@teamdrh Great job gang, as always we are all grateful you have done what no others could do, Thank you from the bottom of our gtabs ( i mean hearts)

[dubbaYous]

gTabletOwnerUnite, on 14 August 2012 - 09:55 AM, said:

Same. Could be a CM10 thing and here.

Love this part from site that reads as follows:

While it might seem like an oversight on Google’s part, as Android Police mentions, Google was actually aware of this issue since last month and instead of acting on it on a priority basis it was relegated to a medium priority status, something to be fixed in the next version of Android.

Key lime pie anyone, sorry not trying to start anything, just silly to make you have to wait however long that would be to fix something that I believe is important to many.

This post has been edited by dubbaYous: 14 August 2012 - 02:17 PM

[bfoster68]

bfoster68, on 14 August 2012 - 01:18 PM, said:

I believe the issue has to do with App Encryption introduced in Jellybean however I have read Google has disabled that. It was causing lots of problems. Still searching for an answer.

so in a logcat i am getting the following error after the file finishes downloading

Failed to create secure container smdl2tmp1

I/installd( 106): free_cache(0) avail 1025675264
D/Finsky ( 2384): [1] OnCompleteListenerNotifier.onPostExecute: Install encrypted com.mojang.minecraftpe
W/ActivityManager( 270): No content provider found for permission revoke: file:///data/data/com.android.providers.downloads/cache/downloadfile-3.apk
D/VoldCmdListener( 98): asec list
D/dalvikvm( 1257): GC_CONCURRENT freed 300K, 12% free 5444K/6151K, paused 2ms+2ms, total 18ms
I/PackageHelper( 1257): Size of container 13 MB
E/PackageHelper( 1257): Failed to create secure container smdl2tmp1
D/dalvikvm( 270): WAIT_FOR_CONCURRENT_GC blocked 0ms
D/VoldCmdListener( 98): asec create smdl2tmp1 13 ext4 {} 10027 0
E/Vold ( 98): Unable to open /dev/block/loop0 (No such device or address)
E/Vold ( 98): ASEC loop device creation failed (No such device or address)
W/Vold ( 98): Returning OperationFailed - no handler for errno 6
E/DefContainer( 1257): Failed to create container smdl2tmp1
W/ActivityManager( 270): No content provider found for permission revoke: file:///data/app-private/vmdl2050066139.tmp
D/dalvikvm( 270): GC_EXPLICIT freed 894K, 27% free 9774K/13319K, paused 2ms+4ms, total 60ms
D/Finsky ( 2384): [201] 1.packageInstalled: Package install status for "null" is -18
D/Finsky ( 2384): [1] InstallerTask.cancelCleanup: Cancel running installation of com.mojang.minecraftpe
D/audio_hw_primary( 104): start_output_stream: device:0, rate:48000, channels:2
W/InputMethodManagerService( 270): Window already focused, ignoring focus gain of: com.android.internal.view.IInputMethodClient$Stub$Proxy@4260d960 attribute=null

[dubbaYous]

Itech post says this

[Note: If you're a Jellybean user and need a workaround to this app-corruption problem, you will need to uninstall all the paid apps from your device and download them again via Play Store. Though these apps would be installed in the unencrypted section of Android memory, it will, pretty much, resolve the issue.]

--------------
Sorry to have overtaken thread about this topic, definitely a great rom not having any real issues.

[tabback]

dubbaYous, on 14 August 2012 - 02:29 PM, said:

Itech post says this

[Note: If you're a Jellybean user and need a workaround to this app-corruption problem, you will need to uninstall all the paid apps from your device and download them again via Play Store. Though these apps would be installed in the unencrypted section of Android memory, it will, pretty much, resolve the issue.]

--------------
Sorry to have overtaken thread about this topic, definitely a great rom not having any real issues.

I read the same, but my paid apps don't install in order to uninstall then re-install. I have tried several attempts to install, etc to no avail so far. will continue to work on

[plastikman]

bfoster68, on 14 August 2012 - 02:20 PM, said:

so in a logcat i am getting the following error after the file finishes downloading

Failed to create secure container smdl2tmp1

I/installd( 106): free_cache(0) avail 1025675264
D/Finsky ( 2384): [1] OnCompleteListenerNotifier.onPostExecute: Install encrypted com.mojang.minecraftpe
W/ActivityManager( 270): No content provider found for permission revoke: file:///data/data/com.android.providers.downloads/cache/downloadfile-3.apk
D/VoldCmdListener( 98): asec list
D/dalvikvm( 1257): GC_CONCURRENT freed 300K, 12% free 5444K/6151K, paused 2ms+2ms, total 18ms
I/PackageHelper( 1257): Size of container 13 MB
E/PackageHelper( 1257): Failed to create secure container smdl2tmp1
D/dalvikvm( 270): WAIT_FOR_CONCURRENT_GC blocked 0ms
D/VoldCmdListener( 98): asec create smdl2tmp1 13 ext4 {} 10027 0
E/Vold ( 98): Unable to open /dev/block/loop0 (No such device or address)
E/Vold ( 98): ASEC loop device creation failed (No such device or address)
W/Vold ( 98): Returning OperationFailed - no handler for errno 6
E/DefContainer( 1257): Failed to create container smdl2tmp1
W/ActivityManager( 270): No content provider found for permission revoke: file:///data/app-private/vmdl2050066139.tmp
D/dalvikvm( 270): GC_EXPLICIT freed 894K, 27% free 9774K/13319K, paused 2ms+4ms, total 60ms
D/Finsky ( 2384): [201] 1.packageInstalled: Package install status for "null" is -18
D/Finsky ( 2384): [1] InstallerTask.cancelCleanup: Cancel running installation of com.mojang.minecraftpe
D/audio_hw_primary( 104): start_output_stream: device:0, rate:48000, channels:2
W/InputMethodManagerService( 270): Window already focused, ignoring focus gain of: com.android.internal.view.IInputMethodClient$Stub$Proxy@4260d960 attribute=null

This is a new thing in JB I forgot to enable loop devices in the kernel...i have attached a fix just flash in recovery this will be merged in the next release.

EDIT: LOL even after fosser2 told me to tell you guys to wipe cache I forgot to post that....please wipe cache before flashing

Attached File(s)

•  secure_market_install_fix.zip (10.82MB)
  Number of downloads: 123

This post has been edited by plastikman: 14 August 2012 - 03:18 PM

[fosser2]

plastikman, on 14 August 2012 - 03:11 PM, said:

This is a new thing in JB I forgot to enable loop devices in the kernel...i have attached a fix just flash in recovery this will be merged in the next release.

This is a flashable zip file. Please flash through recovery. Before flashing please wipe cache and dalvik!

[dnlnnhs]

Just installed it. The instructions in the OP are a little light - I have installed many ROMS so I knew what to do, but the less experienced may be headed for trouble. I install from the external SD card - went fine.

As expected, the initial startup was slow, really had to give it time to recognize touches. Even as I adjusted a few things in Settings, the speed and responsiveness improved. Couple of things to note, Notifications are really loud - even after turning it all the way down in Settings. Also, icons appear to be bigger than ICS - observation only, not an issue. Miss the ROM Control options in the Settings too. Letting it "bake" now before adding apps - will update later. Second startup was 32.60 seconds (approximately).

Amazing work!

[fosser2]

dnlnnhs, on 14 August 2012 - 03:20 PM, said:

Just installed it. The instructions in the OP are a little light - I have installed many ROMS so I knew what to do, but the less experienced may be headed for trouble. I install from the external SD card - went fine.

As expected, the initial startup was slow, really had to give it time to recognize touches. Even as I adjusted a few things in Settings, the speed and responsiveness improved. Couple of things to note, Notifications are really loud - even after turning it all the way down in Settings. Also, icons appear to be bigger than ICS - observation only, not an issue. Miss the ROM Control options in the Settings too. Letting it "bake" now before adding apps - will update later. Second startup was 32.60 seconds (approximately).

Amazing work!

We are working on a brand new process right now. I'm trying to keep this as easy to read as possible. There are lots of people that dont read the full OP as it is. The new install process will be pretty slick and completely get rid of the TnT boot step.

[bfoster68]

plastikman, on 14 August 2012 - 03:11 PM, said:

This is a new thing in JB I forgot to enable loop devices in the kernel...i have attached a fix just flash in recovery this will be merged in the next release.

EDIT: LOL even after fosser2 told me to tell you guys to wipe cache I forgot to post that....please wipe cache before flashing

sweet. thanks guys

[dubbaYous]

plastikman, on 14 August 2012 - 03:11 PM, said:

This is a new thing in JB I forgot to enable loop devices in the kernel...i have attached a fix just flash in recovery this will be merged in the next release.

EDIT: LOL even after fosser2 told me to tell you guys to wipe cache I forgot to post that....please wipe cache before flashing

As usually, pure genius.thanks so very much