[vtx]

how do i apply the patch......micro sd or usb

[ajohnston1]

I'm really confused and totally new to all of this so would really appreciate some help! I downloaded patch to 4.0.3 tablet unzipped it and tried to click run_me.bat and it said open as text image audio or some other option I can't remember but didn't do anything. How do I actually get it to work or do I need to do it on pc and plug in tablet via USB etc. or will the post with the two other downloads then patch work? If so is it done directly on tablet or pc and tablet connected via USB.

[odysseus]

ajohnston1, on 27 July 2012 - 06:48 PM, said:

I'm really confused and totally new to all of this so would really appreciate some help! I downloaded patch to 4.0.3 tablet unzipped it and tried to click run_me.bat and it said open as text image audio or some other option I can't remember but didn't do anything. How do I actually get it to work or do I need to do it on pc and plug in tablet via USB etc. or will the post with the two other downloads then patch work? If so is it done directly on tablet or pc and tablet connected via USB.

I strongly suggest that you read the initial post again plus some other threads.
Like http://www.slatedroi...-ampe-a10-root/ for example.

This patch is for the 4.0.4 beta(4.0.4 beta download link also in the initial post)not the 4.0.3.
Meaning you need to have 4.0.4 installed before applying the patch.

In short:

First flash 4.0.4 and after that you can run the Ampe A10 Android 4.0.4 Beta Patch.

Concerning howto flash through Livesuit:

1. Unpack LiveSuit
2. Connect the tablet with the PC (over USB) and install the driver
3. Disconnect the tablet and shut it down
4. Press the "Volume +" button and hold it. During that time connect the tablet with the PC (over USB)
5. Start Livesuit - YES - FORMAT - NEXT - YES
6. Choose the File (.img)
7. Release the "Volume" + button and the the update should start.

Good luck and let us know if you get any further!

This post has been edited by odysseus: 31 July 2012 - 07:22 AM

[odysseus]

vtx, on 24 July 2012 - 11:25 AM, said:

how do i apply the patch......micro sd or usb

USB, make sure USB debugging is enabled in developer options!

[vtx]

odysseus, on 31 July 2012 - 07:21 AM, said:

USB, make sure USB debugging is enabled in developer options!

Thanx for the info......but my ampe A10 very slow

[odysseus]

vtx, on 01 August 2012 - 04:29 AM, said:

Thanx for the info......but my ampe A10 very slow

Try a factory data reset (Backup & reset-->Factory data reset) and see if that helps out.

This post has been edited by odysseus: 01 August 2012 - 11:18 AM

[odysseus]

Peterplan, on 23 July 2012 - 02:57 AM, said:

After 4.04 and 4.0.4 Beta Patch,I find that the time of my N10 delay one min per hr. Anyone also have this problem ?

Same here.
Use ClockSync to workaround this problem.
As you are on 4.0.4/Rooted you can set auto synchronization in ClockSync.

This post has been edited by odysseus: 02 August 2012 - 06:40 AM

[Sh31]

Hi there,
I'm looking for a miror hosting to download SANEI N10 fireware (0180) from http://www.szsanei.c...down.asp?id=754
Because it too slow that offcial website

If anyone have any idea, it will be apreciat...

[rodn777]

hi!

does anybody know the difference between android 4.0.4 firmware 0171 and 0172 - downloaded both and want to flash the "better" one

thanks!
heli

[hxs]

Moorthy, on 03 July 2012 - 08:50 AM, said:

Dear Guys,

Note:- This is for ONLY Sanei N10/Ampe A10 Tablet Build Android 4.0.4

Android 4.0.4 Patch from link

I have changed to work with our tablets.

Features

1. Build.Prop Replaced with Better One.
2. Missing Apps are fixed for Google Play Store.
3. Taskbar transparent mode
4. Android Icons changed to Blue Colour Icons
5. USB Transfer mode LOGO changed
6. Dialog Box look has been changed.
7. Physical button VOLUME UP has been remapped to toggle taskbar on and off.

Note: I did OverClocked to 1008 to 1152Mhz with No-Frils CPU Control App. You can do it with whatever you like.

Step 1

1. Download patch N10-A10-Patch.zip
2. Your tablet should be rooted already.
2. Check USB Debugging Enabled
3. DoubleClick Run_Me.bat

After Complete, It will be rebooted automatically. Thats all.

After rebooted, check your tab Google play shows facebook by searching it.

If does not show follow this

Step 2


1. Settings -> Apps -> Google play -> clear cache
2. Settings -> Apps -> All -> Google Services Framework -> Clear data -> Force Close.
3. Reboot your tablet.

Still you can't see facebook? repeat Step 2 once again. Now you should see all missing apps in Google Play.

If not, maybe your tablet not rooted. First root it and try again.

Regards

Check Screenshots

I have updated my tablet to 4.0.4 successfully but I can't get the patch to work. As you can see from attached photo i get alot of "device not found" errors. Do you know what I do wrong?

Attached File(s)

•  patch.jpg (29.17K)
  Number of downloads: 54

[suffix]

hxs: did you enable usb debugging again after updating?

[odysseus]

hxs, on 03 August 2012 - 08:47 PM, said:

I have updated my tablet to 4.0.4 successfully but I can't get the patch to work. As you can see from attached photo i get alot of "device not found" errors. Do you know what I do wrong?

Indeed check if USB debugging is enabled although it should be by default on 4.0.4.
Also make sure Windows recognizes the tablet properly on the USB port before running the patch.

[hxs]

I found out that the Android drivers where not installed correctly.
This site helped me to fix it:
http://theunlockr.co...ndroid-devices/

[Peterplan]

odysseus, on 02 August 2012 - 06:40 AM, said:

Same here.
Use ClockSync to workaround this problem.
As you are on 4.0.4/Rooted you can set auto synchronization in ClockSync.

Thank, I will try

[Peterplan]

After 4.04 and 4.0.4 Beta Patch, I can't find bluetooth in my N10. How can I fix it ?

[jolie75]

hello i have a new sanei n10 tablet and its a little slow even after 4.0.4, i was wondering if it is possible to downgrade it to an earlier version like 3 or something to make it work faster, if it is can someone please tell me how?

[mosh]

try cm9 on it.

[jolie75]

mosh, on 05 August 2012 - 06:45 AM, said:

try cm9 on it.

according to their site my tablet isn't compitable

This post has been edited by jolie75: 05 August 2012 - 07:19 AM

[suffix]

jolie75, on 05 August 2012 - 07:16 AM, said:

according to their site my tablet isn't compitable

Christian Troy makes compatible builds and posts them in this forum too.

CM: http://www.slatedroi...-cm9-nightlies/

AOKP: http://www.slatedroi...34824-rom-aokp/

I'm running AOKP on my Ampe A10. It's based on the same code as CM9. But I still get freezes with the stock browser... Opera works well though. And overall performance is much better.

I'm making a guide tonight of how to install AOKP / CM9 on our devices, because it's kind of tricky.

This post has been edited by suffix: 05 August 2012 - 08:01 AM

[jolie75]

suffix, on 05 August 2012 - 07:38 AM, said:

Christian Troy makes compatible builds and posts them in this forum too.

CM: http://www.slatedroi...-cm9-nightlies/

AOKP: http://www.slatedroi...34824-rom-aokp/

I'm running AOKP on my Ampe A10. It's based on the same code as CM9. But I still get freezes with the stock browser... Opera works well though. And overall performance is much better.

I'm making a guide tonight of how to install AOKP / CM9 on our devices, because it's kind of tricky.

i don't know why but since i installed the 4.0.4 beta i can't get into the cwm, instead i just get a regular recovery with the broken android symbol can you please tell me how to get it into cwm?