Here is Clockworkmod v220.127.116.11 Touch edition for the Prestigio PMP5080B. It is a modified version of the one created by jgelauff, which was based on the work of Christian Troy, simone201 & koush. It should at minimum work on the Prestigio 5080B, Next 8 Premium, Mediacom Smartpad 810c and the BQ Kepler. It may indeed work on other RK2918 tablets but that would need to be confirmed.
The initial version requires an ICS rom formatted in either EXT3 or EXT4. CWM launch key is from power off hold vol- then press power button.
If CWM is already installed > copy desired zip to SD > install zip from sdcard > reboot recovery to take effect
If no CWM currently installed > unzip desired image > flash current rom parameter and recovery image with RKAndroidTool
If you flashed your rom with a single image file then it is strongly recommended that you do not flash CWM yet. It requires a certain level of knowledge to use CWM in such an environment. A guide will follow in due course.
If CWM launch key is not working check that your parameter file contains the COMBINATION_KEY line (and if not simply insert it before flashing) e.g.
CMDLINE: console=ttyS1,115200n8n androidboot.console=ttyS1 init=/init initrd=0x62000000,0x800000
Use on screen controls and/or Power = Enter (select option), Vol+/- = Up/Down & Back = Back (previous menu)
For background and info on this release read this thread - http://www.slatedroi...be-development/
Sources & Thanks to:
And of course farangcm, whose interest, ideas and questions prompted this release.
Related release for Cube U9GT2 : http://www.slatedroi...for-cube-u9gt2/
Edited by damonfeuer, 23 May 2012 - 04:25 PM.