Jump to content


Photo

[FIRMWARE] pwn3d


  • Please log in to reply
3 replies to this topic

#1 blubb0211

blubb0211

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 42 posts

Posted 16 May 2012 - 06:33 PM

Hello Guys!

I think, many people of this subforum haven't heard from this ROM, that's why I opened this thread.
Actually the official thread is here: CLICK
But there are no specific instructions for our device.

--------------------------------------------------

Features

* usb bluetooth support
* full market access
* wifi location working
* zipaligned
* superuser
* build.prop tweaks
* more to come


Instructions:

- Backup your files, because you will have to do factory reset.

- Download the Stock Gemei G9 ROM, if not already done
- Flash this ROM with Livesuit (Instructions by Mr. Tasselhof: Livesuit Software Install and Driver Compilation files)
- Turn your tablet on
- Download this zip by Christian Troy, unpack, copy the recovery.img to the following path: /sdcard/recovery.img
- Download pwn3d V1.4 ROM by Christian Troy, copy the downloaded zip to /sdcard/pwn3d-1.4.zip

- Install Terminal Emulator through Google Play (you don't need any Root access!) or use shell through adb
- Enter Terminal Emulator or adb shell
- type in:
cat /sdcard/recovery.img > /dev/block/nandg
- confirm with "Enter". Wait, till the next line appears.
- type in:
sync; sync; sync
- confirm again with "enter".

- shutdown your tablet. Boot it into recovery (Press and hold Vol. down, press Power Button for 3 seconds, release both buttons)
- You should now be in the CWM Recovery mode.
- Navigate to "Wipe data/Factory reset" using the Vol buttons and choose it with the Power button. Confirm with yes.
- Navigate to "Mounts and storage", format /system.
- Navigate to install zip from sdcard, choose install zip from internal sdcard, choose the pwn3d-1.4.zip
- When done, reboot your tablet.
- Enjoy the ROM!

Tested on Gemei G9 with silver cover. I don't take any responsibility for damages!

Known Issues:
The Clock isn't in time, it goes to slow.
----------------------------------------------------


Thanks to Christian Troy, Mr. Tasselhof!

Edited by blubb0211, 16 May 2012 - 06:43 PM.


#2 rororob

rororob

    Member

  • Jr. Member
  • PipPip
  • 16 posts

Posted 18 May 2012 - 09:05 AM

I've tried v1.4 of this ROM on the G9, but didn't get good results. It ran slow, and scrolling not smooth.

If you want to try it out, an easier way to install CWM is to use sausagescipt on the G9, then you can just flash the pwn3d zip.

Edited by rororob, 18 May 2012 - 11:49 AM.


#3 blubb0211

blubb0211

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 42 posts

Posted 19 May 2012 - 09:43 AM

Hmmm I get quite good results with Quadrant, like 1700... but now, I'm trying the newest CM9, which I think is even better than this one.

#4 rororob

rororob

    Member

  • Jr. Member
  • PipPip
  • 16 posts

Posted 20 May 2012 - 07:38 AM

I never trust quadrant, I just rate it on the user experience, and this ROM just didn't seem very fluid.