Jump to content


Photo

[Script] Change sdcard and TF-card


  • Please log in to reply
126 replies to this topic

#121 Boricuahomeboy

Boricuahomeboy

    Newbie

  • Jr. Member
  • Pip
  • 3 posts

Posted 01 March 2013 - 10:52 PM

Thanks, looking forward to try this.

#122 Boricuahomeboy

Boricuahomeboy

    Newbie

  • Jr. Member
  • Pip
  • 3 posts

Posted 02 March 2013 - 12:24 AM

works like a charm :good:

#123 bagione

bagione

    Newbie

  • Jr. Member
  • Pip
  • 1 posts

Posted 08 March 2013 - 07:16 AM

Hy,
could anyone help me, this script didnt manage to help me, this is what is happening..

error: device not found
Try to connect...
error: device not found
Try to connect...
adb server is out of date. killing...
* daemon started successfully *
remount succeeded
adb server is out of date. killing...
* daemon started successfully *
762 KB/s (2343 bytes in 0.003s)
adb server is out of date. killing...
* daemon started successfully *
adb server is out of date. killing...
* daemon started successfully *
78 KB/s (240 bytes in 0.003s)
adb server is out of date. killing...
* daemon started successfully *
Check path of TF-card and make modification
adb server is out of date. killing...
* daemon started successfully *
You have backup vold.fstab.orig already

Device mount found sdcard in line_.18
Device mount found udisk in line_.19 - no modification needed



The script can't to switch cards for this device



here is my file, can anyone help me modify it so it can work, i tried the written option also but not working...
at is a Arnova 7b G3 device

## Vold 2.0 Generic fstab
## - San Mehat (san@android.com)
##

#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################

## Example of a standard sdcard mount for the emulator / Dream
# Mounts the first usable partition of the specified device
#dev_mount sdcard /mnt/sdcard auto /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
dev_mount sdcard /mnt/external_sd auto /devices/platform/rk29_sdmmc.0/mmc_host/mmc0
dev_mount udisk /mnt/usb_storage auto /devices/platform/usb20_otg/usb
## Example of a dual card setup
# dev_mount left_sdcard /sdcard1 auto /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
# dev_mount right_sdcard /sdcard2 auto /devices/platform/goldfish_mmc.1 /devices/platform/msm_sdcc.3/mmc_host/mmc1

## Example of specifying a specific partition for mounts
# dev_mount sdcard /sdcard 2 /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
  • ellik954 likes this

#124 Litipis

Litipis

    Newbie

  • Jr. Member
  • Pip
  • 1 posts

Posted 23 April 2013 - 05:21 AM

Where do I find ADB USB Testing driver for Ainol Novo 7 Venus?

#125 OoSRHo0

OoSRHo0

    Newbie

  • Jr. Member
  • Pip
  • 2 posts

Posted 05 February 2014 - 10:54 PM

Try to connect the device by adb during booting. If it will connected then you can replace vold.fstab to original by adb (push command) or try to use gui-adb (Android Commander).
If you switch off USB-debugging, then you need reflash original firmware IMHO.

ok i need to push a new vold.fstab file i believe . i edited it and caused it to crash ..

 

not i get 3 errors when installing anything.

 

I: Cant partition unsafe device: /dev/block/mmcblk0p1

I: Cant format unknown volume: /external_sd

I: Cant format unknown volume: /emmc

 

 

after installing anything.. stock rom, root, anything? help?



#126 OoSRHo0

OoSRHo0

    Newbie

  • Jr. Member
  • Pip
  • 2 posts

Posted 06 February 2014 - 10:59 AM

Try to use file from the ZIP. (Replace original vold.fstab and set properties rw-r--r--). Please note, some devices can't to work fine with modified vold.fstab.

i need a way to install this via SD card with no debugging on. I cant get to the option since im stuck in bootloop. My laoptop does not recognize the tablet with i connect it via usb also.



#127 ellik954

ellik954

    Newbie

  • Jr. Member
  • Pip
  • 1 posts

Posted 12 February 2014 - 03:06 AM

Sergey_F1 Hi,

 

I was hopeing that you would help me.  I have the following:

 

Traveltek m9703 Tablet with jelly bean 4.2.2 with the Vold.fstab file that reads:

 

## Vold 2.0 Generic fstab
## - San Mehat (san@android.com)
## 
 
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...> 
## label        - Label for the volume
## mount_point  - Where the volume will be mounted
## part         - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
 
## Example of a standard sdcard mount for the emulator / Dream
# Mounts the first usable partition of the specified device
#dev_mount sdcard /mnt/sdcard auto /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
#dev_mount flash /mnt/sdcard auto /devices/virtual/mtd/mtd9/mtdblock9
 
dev_mount flash /mnt/sdcard auto /devices/virtual/mtd/mtd9/mtdblock9
dev_mount sdcard /mnt/external_sd auto /devices/platform/rk29_sdmmc.0/mmc_host/mmc0
dev_mount udisk /mnt/usb_storage auto /devices/platform/usb20_host/usb /devices/platform/usb20_otg/usb
 
## Example of a dual card setup
# dev_mount left_sdcard  /sdcard1  auto /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
# dev_mount right_sdcard /sdcard2  auto /devices/platform/goldfish_mmc.1 /devices/platform/msm_sdcc.3/mmc_host/mmc1
 
## Example of specifying a specific partition for mounts
# dev_mount sdcard /sdcard 2 /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
 
could you or anyone with the correct knowledge please help! What do i change and where? 
Thank you!

 

 





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users