Jump to content


Photo

ICOO D70W


  • Please log in to reply
11 replies to this topic

#1 scud512

scud512

    Newbie

  • Jr. Member
  • Pip
  • 6 posts

Posted 20 March 2012 - 06:46 PM

This may end up being a popular product to replace Ainol tablets which appear to be having all sorts of problems in prodution or in achieving high quantities to satisfy demand. Does anyone know if the scripts for root access and market access would work for this particular tablet. The people at Pandawill says the microcode was developed by the same group of people doing the coding for Ainol.

#2 jpe70

jpe70

    Member

  • Jr. Member
  • PipPip
  • 12 posts

Posted 30 March 2012 - 10:57 AM


Edited by jpe70, 10 April 2012 - 01:08 PM.


#3 alitsta

alitsta

    Member

  • Jr. Member
  • PipPip
  • 11 posts

Posted 22 April 2012 - 06:13 PM

Hi all.

Got ICOO D70W. Not powered after unpack. I plug charger - it's power on, but rebooting every 10 sec (android ico in the middle of screen). I'm sad.

Anyone any ideas? Thanks.

Posted Image

#4 Nickos-V

Nickos-V

    Advanced Member

  • Hero Member
  • PipPipPip
  • 2,026 posts

Posted 22 April 2012 - 06:46 PM

Anyone any ideas? Thanks.

Find reset button. It is inside a pinhole. Stick a needle, paperclip or toothpick in the pinhole. Hit the reset button.

That may work. If it does not, then you will have to flash the tablet with firmware.

Also, sometimes there is button combo you can use to get into recovery mode. You maybe able to restore firmware in there. Not sure what the key combo is. Either 2 or 3 buttons are pressed together and held for couple of seconds.

Edited by Nickos-V, 22 April 2012 - 06:47 PM.


*MINIX NEO X5 (RK3066) - OK. Not fun because uses mouse cursor.
*YUANDAO N80 DUAL (RK3066) - Very good
*CUBE U30GT (RK3066)- Defective; buttons broke in 2-3 weeks; Bad quality control!!! I will never buy a Cube again!!! - Very good while working
*WOPAD I7 (RK2918)- About OK. Sluggish because has weaker ARM chip (RK2918) & less RAM (512 MB).

#5 alitsta

alitsta

    Member

  • Jr. Member
  • PipPip
  • 11 posts

Posted 22 April 2012 - 07:55 PM

No reset hole find on this device. Only "mic".

Try to flash with LiveSuit but it's don't see the tablet (I try many many combination of pressed buttons and version of LiveSuite/usb drivers). I have Ainol Elf and it's flash fine with Livesuit.

I read all topics in this section, but any positive results.


Maybe any other advice, guys?

#6 jpe70

jpe70

    Member

  • Jr. Member
  • PipPip
  • 12 posts

Posted 23 April 2012 - 01:42 AM

I have made a post with links to how getting in upgrade mode, and you find latest software in my Dropbox. If that don't work, ask for replacement.

Skickat från min MT15i via Tapatalk 2

#7 alitsta

alitsta

    Member

  • Jr. Member
  • PipPip
  • 11 posts

Posted 24 April 2012 - 09:57 AM

Any other ideas? I plan to return(

#8 alitsta

alitsta

    Member

  • Jr. Member
  • PipPip
  • 11 posts

Posted 25 April 2012 - 02:48 AM

Flash it by holding "reset" button instead of "volume". But still looping boot. Plan to try another firmware.

Is there a way to install recovery.img if the tablet flash only through Lifesuite?

Edited by alitsta, 25 April 2012 - 03:13 AM.


#9 alitsta

alitsta

    Member

  • Jr. Member
  • PipPip
  • 11 posts

Posted 25 April 2012 - 04:32 AM

Flash it by holding "reset" button instead of "volume". But still looping boot. Plan to try another firmware.

Is there a way to install recovery.img if the tablet flash only through Lifesuite?



Is there any alternative firmware (Ubuntu etc.) for the format of Livesuite (Phoenix)- IMG?
Can I install recovery CWM) through Livesuite (Phoenix)?

#10 alitsta

alitsta

    Member

  • Jr. Member
  • PipPip
  • 11 posts

Posted 26 April 2012 - 06:00 PM

Repaired. Disassembled and locked the contacts of the battery (very quickly). Then flashed through Lifesuite.

#11 alitsta

alitsta

    Member

  • Jr. Member
  • PipPip
  • 11 posts

Posted 27 April 2012 - 02:39 AM

Repaired. Disassembled and locked the contacts of the battery (very quickly). Then flashed through Lifesuite.


But another problem. He works from a full charge 20-30 minutes. And heated. I am sure it is a hardware problem. Unfortunately I send it back

#12 piperka07

piperka07

    Newbie

  • Jr. Member
  • Pip
  • 9 posts

Posted 09 May 2012 - 07:44 AM

Hello,

I have a D70W but managed to tear the ribbon cable of the touch panel. Now I am trying to find a replacement cable or (preferably) a new touch screen, but I could not any spare parts for this tablet. The only touch screen that looks almost the same as my part is for Ainol NOVO7 Advanced/Basic, but I am not sure it will be compatible with mine (it has 2 more capacitive buttons and the size might be different). Has anyone had luck finding (compatible) spare parts for this tablet?
The model number seems to be DPT-L3538A-G (on the panel itself) and the marking on the cable is "DPT GROUP 300-l3537A-A00_VER 1.0
Thanks in advance

EDIT: I contacted OWNTA and the next day they added the replacement touchscreen to their site. - http://www.ownta.com...eplacement.html
I ordered it on 11.05, received it today and just mounted it - works. My ICOO is back in business.

Edited by piperka07, 29 May 2012 - 12:50 PM.

Archos 70IT -> ICOO D70W -> Ployer MOMO7 Dual-Core




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users