[RenGyoshi]

10" C91 (512MB+8GB) android4.0 2012-02-22_3a
Released now.

Current Version Update:
1. TP firmware Patch.
2. Full screen Play video.
3. Update screen rotate effect.

Where's 2n and 3n?
Anyway, download first.

This post has been edited by RenGyoshi: 22 February 2012 - 07:09 PM

[RenGyoshi]

RenGyoshi, on 22 February 2012 - 07:03 AM, said:

Where's 2n and 3n?
Anyway, download first.

Download has completed now.

I've found no replacement folders for 2n/3n in this content. So it is only for 3a.
Mine is 2n so go to bed now.

[nickyng]

RenGyoshi, on 22 February 2012 - 08:03 AM, said:

Download has completed now.

I've found no replacement folders for 2n/3n in this content. So it is only for 3a.
Mine is 2n so go to bed now.

2n version no more support for ICS ??

[omarahum]

I'm pretty sure this was just a full version ROM for the 3a model tablets that were having touchscreen jitter issues, atp did post a patch, but I guess they wanted to put up a full ROM version also....

atp_uestc, on 19 February 2012 - 11:26 PM, said:

if 3a, and jitter, we will offer a patch this days.
if 2n/3n , just calibrate it.

you should check your barcode

atp_uestc, on 21 February 2012 - 10:47 PM, said:

3a:
http://www.zenithink...-Patch_0221.rar
remember, if charging jitter, don't use this. this will less performance when charge in.we will continue to improve it.


szaszaTT :
2n just press camera key 5second for calibrate.

[nrap]

Ok, so I have the 3a tablet...

Updated last week to 20120211 succesfully..
Now I have downloaded the latest...
Copied on SD..
Camera Button + Vol+
started update

Device /dev/block/cardblksd1 mounted
Formating /system...
Formating /cache...
Formating /data...
Formating /media...
E:format_volume: fdisk.media failed on /dev/block/avnftl3p1

--update oem package---
install zt-update/system.zt280.tar.bz failed
install oem update package failed

so now I'm stuck in the Android system recovery utility... !!
Tha volume button goes up and down to the selections (reboot/apply update etc)..
WHICH is the ENTER button to execute the reboot!?!??!!
or do I have to wait for the battery to die?!??

Thanx

[omarahum]

nrap, on 22 February 2012 - 01:39 PM, said:

Ok, so I have the 3a tablet...

Updated last week to 20120211 succesfully..
Now I have downloaded the latest...
Copied on SD..
Camera Button + Vol+
started update

Device /dev/block/cardblksd1 mounted
Formating /system...
Formating /cache...
Formating /data...
Formating /media...
E:format_volume: fdisk.media failed on /dev/block/avnftl3p1

--update oem package---
install zt-update/system.zt280.tar.bz failed
install oem update package failed

so now I'm stuck in the Android system recovery utility... !!
Tha volume button goes up and down to the selections (reboot/apply update etc)..
WHICH is the ENTER button to execute the reboot!?!??!!
or do I have to wait for the battery to die?!??

Thanx

There's a pinhole reset right next to the usb port for ethernet, just stick a paper clip in there and it will turn off the tablet....

[SjPedro]

RenGyoshi, on 22 February 2012 - 07:03 AM, said:

10" C91 (512MB+8GB) android4.0 2012-02-22_3a
Released now.

Current Version Update:
1. TP firmware Patch.
2. Full screen Play video.
3. Update screen rotate effect.

Where's 2n and 3n?
Anyway, download first.

TP Firmware patch? what is this? I don't see what they mean with this

EDIT: Must be Touch-Point? In any case no 2n version as of yet it seems. Weird.

This post has been edited by SjPedro: 22 February 2012 - 02:50 PM

[Jezzer]

SjPedro, on 22 February 2012 - 02:47 PM, said:

TP Firmware patch? what is this? I don't see what they mean with this

EDIT: Must be Touch-Point? In any case no 2n version as of yet it seems. Weird.

I thought it meant the video format TP.
Yes, a 2n version would be nice.

Sent from my Zenithink zt280 ICS 20120211 OK900 kernel

This post has been edited by Jezzer: 22 February 2012 - 04:31 PM

[nrap]

omarahum, on 22 February 2012 - 01:57 PM, said:

There's a pinhole reset right next to the usb port for ethernet, just stick a paper clip in there and it will turn off the tablet....

Worked like a charm the second time (no idea why)!!
Everything is working exactly like before...
cheers!

[atp_uestc]

it just emergency release for 3a touch panel jitter problem.
we are plan to update the kernel from 2.6.34 to 3.0. i think it will more performance that.

nrap:
are you success update?

[atp_uestc]

RenGyoshi:
if you like taste 0222 firmware, just renew system.zt280.tar.bz package.

[RenGyoshi]

atp_uestc, on 22 February 2012 - 09:01 PM, said:

RenGyoshi:
if you like taste 0222 firmware, just renew system.zt280.tar.bz package.

Uh... Thanks, but I think I'd better wait for next 3.0 kernel.
So much expect to its high performance.

This post has been edited by RenGyoshi: 23 February 2012 - 12:11 AM

[antoniorodc]

Do you think upgrade to kernel 3.0 or 3.2.7 (latest stable version)?

Version 3.2.7 correct power consumption issues introduced in previous versions (really the problem was corrected from version 3.2.5)

[nrap]

atp_uestc, on 22 February 2012 - 08:51 PM, said:

it just emergency release for 3a touch panel jitter problem.
we are plan to update the kernel from 2.6.34 to 3.0. i think it will more performance that.

nrap:
are you success update?

yes, as far as I can tell...
I rebooted with the reset hole, (same SD/same files..didn't touch them)...
Camera+ Vol+,

The only error during update was this

E:format_volume: fdisk.media failed on /dev/block/avnftl3p1

but then everything continued successfully..

I haven't really "played" with the new kernel, but for like half an hour
I accessed web sites etc, didn't see much difference than the previous version.

When you say there is a jitter problem, is this the problem when I press the
power button and it "flashes" before shuting down the screen?

[Jezzer]

Thanks for clarifying that atp. I also look forward to kernel 3.0. Maybe 900 mhz or 1 GHz CPU clocking would be great B-)

Sent from my GT-I9100 using Tapatalk

[welch_rh2]

omarahum, on 22 February 2012 - 01:57 PM, said:

There's a pinhole reset right next to the usb port for ethernet, just stick a paper clip in there and it will turn off the tablet....

I have exactly the same problem, word for word, but the tablet won't reboot after resetting with the pin.
switching it on after hard reset results in the initial splash screen followed by the android icon , which doesn't go away (I waited 20 minutes ) retrying the firmware update with 'camera' 'power on' results in fdisk.media failed messages again.

I have a bricked C91 any ideas how I get get out of this ?

[welch_rh2]

nrap, on 22 February 2012 - 06:18 PM, said:

Worked like a charm the second time (no idea why)!!
Everything is working exactly like before...
cheers!

do you mean you could update the firmware 2nd time ? or that you could reboot and get past the android icon ?

[welch_rh2]

Thanks, I would really appreciate an answer to the problem of a failed firmware update on my zepad c91 android 4.0 - any idea how to do this ?

[welch_rh2]

omarahum, on 22 February 2012 - 01:57 PM, said:

There's a pinhole reset right next to the usb port for ethernet, just stick a paper clip in there and it will turn off the tablet....

As a 'last straw' I reformatted the tf card and put zt-update on it again - it worked this time - though I had to start again setting up the apps etc - but at least it isn't bricked anymore.

I suspect my 32gb tf is faulty - I'll be replacing it asap

[zara95]

nrap, on 22 February 2012 - 01:39 PM, said:

Device /dev/block/cardblksd1 mounted
Formating /system...
Formating /cache...
Formating /data...
Formating /media...
E:format_volume: fdisk.media failed on /dev/block/avnftl3p1

I had the exact same problem and a "novotek package" couldn't install. The C91 continued booting but then had a jitter issue and I couldn't use the keyboard (ramdom letters wherever I touch it)
I could install the 2.3 firmware with no error message during formatting.

I've tried to redo the update : I had the message "E:format_volume: fdisk.media failed on /dev/block/avnftl3p1" but then the update continued with no errors. On first boot the wallpaper was not "centered" but it was after a reboot.

What should I do if I have the screen problem again? Should I install the patch?
Now it seems to work but what should I do if I had