[Serge Bolduc]

cavywavy, on 22 April 2012 - 12:26 PM, said:

Hi,

Ok so Im a bit of a noob to Flytouches but my dad got one from feebay Superpad V10 becuase he had an android phone and it all seems to work its running 2.3 apart fromt he market place, as far as I can work out it dosnt know its in the UK so many of the apps he normaly uses on his phone arnt showing.

I have read through all 35 pages and need to know what Firmware for 2.3 is working for android market to tell the pad its in the UK, and I dont have a USB cable so it will need to be a flash from SD card.

He is looking ot get things like Iplayer and Sky Go working as thats why he brought it.

There are market utility (market enabler) to change location.

[Serge Bolduc]

You can also try to reset to factory setting and I am not sure when restarting chose english UK in language option. I am not sure there a english UK in 2.3 but you could try.

[cavywavy]

Marlet enabler dosnt work, it dosnt seemt o do anything and fake on boot needs a donate key so havent tried that.

and I tried setting it to english in factory settings it changes the langwage and stuff but not where market see it its something to do witht he way they built the ROM.

The thing is going out the window soon I have a Z102 with ICS and it works lovley but Sky go isnt out for ICS and Iplayer wont run. so when he was looking for one he got one with 2.3 and now we carnt even get the apps to download

[Lykkan]

I have a superpad vi that will not turn on. Charge light comes on fine when plugged in, nothing shows on screen. I plugged a usb thumbdrive into it and usb gets power for 10 seconds after hitting power button, then it goes off.
I wrote the original firmware to the sd card, following the files in this post with same symptoms as before. Charging light flashes green/red when fully charged...

QCC, on 04 April 2012 - 12:02 PM, said:

If you are having problems, DO NOT install ICS 4 and DO NOT use any updates.
Start from the very beginning. Follow the instructions in my previous post at 7:59AM today

If the process in my previous post does not work, you will have to remove the internal uSD card and image it with the 4GB emergency firmware image found here. Memory card image
Initial instructions to open the tablet are here How to open the tablet

Following the above procedure will put your tablet back to the original factory installation.
Check everything out. If it works, then install the last update firmware, 20120110.

Forget about ICS 4 for your tablet. It is not ready for daily use.

Files you should have to image the internal uSD card.
Download these programmes.
SD Format from SD card format tool
Win32 disk manager Mini disk imaging tool

This post has been edited by Lykkan: 26 April 2012 - 12:26 AM

[Oldman_55]

Hello FLYTOUCH SUPERPAD 6 (VI) V10 CORTEX A8 VIMICRO 1 Gb 16Gb 1GHz My tablet problem for GPS Gps power /on Off no problem it is working.But don't signal GPS Test tools working I can not find any satellite. But position the cursor on the north pole as it seems positions value : N90.000 00.000 E000 00.000 (coordinat system WGS84 -it is for my country) after work nvigasyon program google and syslogic and yandex all positon north pole what is it problem understnd

[Serge Bolduc]

Oldman_55, on 09 May 2012 - 06:15 AM, said:

Hello FLYTOUCH SUPERPAD 6 (VI) V10 CORTEX A8 VIMICRO 1 Gb 16Gb 1GHz My tablet problem for GPS Gps power /on Off no problem it is working.But don't signal GPS Test tools working I can not find any satellite. But position the cursor on the north pole as it seems positions value : N90.000 00.000 E000 00.000 (coordinat system WGS84 -it is for my country) after work nvigasyon program google and syslogic and yandex all positon north pole what is it problem understnd

First time when using GPS, it must be in open place (outside). Then usualy with a known location it will work inside.

This post has been edited by Serge Bolduc: 09 May 2012 - 08:05 AM

[ersa48]

I have installed gps antenna and open gps.Then I did it as your recommendation which was at outside for 8-10 hrs.Unfortunately, the result was negative.What else can be done to get results.I have flytouch VI as the following: 10.2" HD Tablet PC Android 2.3 8GB+GPS+3G+WI-FI .thanks in advance.

[Serge Bolduc]

ersa48, on 09 May 2012 - 01:09 PM, said:

I have installed gps antenna and open gps.Then I did it as your recommendation which was at outside for 8-10 hrs.Unfortunately, the result was negative.What else can be done to get results.I have flytouch VI as the following: 10.2" HD Tablet PC Android 2.3 8GB+GPS+3G+WI-FI .thanks in advance.

In settings, does GPS is check in location?

[Serge Bolduc]

Serge Bolduc, on 09 May 2012 - 02:06 PM, said:

In settings, does GPS is check in location?

Use GPS test app or any GPS app.

[ersa48]

Serge Bolduc, on 09 May 2012 - 02:06 PM, said:

In settings, does GPS is check in location?

GPS settings was OK.I have downloaded trial version of SYGIC for android & installed gps antenna then OK.Also gps signal seems on the screen.it works with int.off line or online.

[techtoys2go.com]

Hello everyone

Just wanted to let you know that we have May 2, 2012 firmware (packaged May 3) posted on our website (along with instructions and video) for the Flytouch 6 (Vimicro CPU Wopad V10). We tried to be thorough with our instructions, however there may be a mistake or two. Please let us know if you find any.

http://www.TechToys2go.com/Flytouch6

The firmware is a nice improvement over the previous build. 3G dongles are working now, as is 2 point touch (pinch-to-zoom). Deep sleep is now possible when the screen is off, which extends the tablet's use by an extremely long time when not being used. As well, Flash is working within the browser (as with the last build). Unfortunately, Bluetooth support is still missing. There are other changes as well... the file manager icon is different, there is an option for rebooting instead of power off, and some others.

Please note that the top USB port now by default is for USB connectivity to your PC, and must be switched in the software if you want to use it to connect USB devices. Go into the applications and choose the "USB OTG Control" app. Then you will see two options to choose. The top option (default) is called "Device" and leaves the top USB port as a slave connection to connect the Flytouch to your PC. The second option is called "Host," turning the top USB port into a host connection (the same as the second USB port), which then will allow you to connect USB sticks, 3G dongles, USB keyboards, etc.

However, in our limited testing, there seems to be a bug in the latest firmware that prevents the Flytouch 6 from mounting properly on PCs and Macs in the "Device" mode. Please let us know if you get it working.

[Gaboros]

techtoys2go.com, on 15 May 2012 - 12:00 PM, said:

Hello everyone

Just wanted to let you know that we have May 2, 2012 firmware (packaged May 3) posted on our website (along with instructions and video) for the Flytouch 6 (Vimicro CPU Wopad V10). We tried to be thorough with our instructions, however there may be a mistake or two. Please let us know if you find any.

http://www.TechToys2go.com/Flytouch6

The firmware is a nice improvement over the previous build. 3G dongles are working now, as is 2 point touch (pinch-to-zoom). Deep sleep is now possible when the screen is off, which extends the tablet's use by an extremely long time when not being used. As well, Flash is working within the browser (as with the last build). Unfortunately, Bluetooth support is still missing. There are other changes as well... the file manager icon is different, there is an option for rebooting instead of power off, and some others.

Please note that the top USB port now by default is for USB connectivity to your PC, and must be switched in the software if you want to use it to connect USB devices. Go into the applications and choose the "USB OTG Control" app. Then you will see two options to choose. The top option (default) is called "Device" and leaves the top USB port as a slave connection to connect the Flytouch to your PC. The second option is called "Host," turning the top USB port into a host connection (the same as the second USB port), which then will allow you to connect USB sticks, 3G dongles, USB keyboards, etc.

However, in our limited testing, there seems to be a bug in the latest firmware that prevents the Flytouch 6 from mounting properly on PCs and Macs in the "Device" mode. Please let us know if you get it working.

Thank you!

[Bremerton]

Tried techtoys2go's version of ICS. Acellerometer / gyroscope / axis sensor now works but that's all that's new. ICS still excrutiatingly slow. Live wallpaper kills cpu. Browsers stop resonding. Hardly anything on the market (US). Overall performance too slow to keep up with even a two year old IMHO. Stick with 2.3 for now.