[Ironstar]

Airgeorge10, on 14 January 2012 - 11:44 AM, said:

HELP !!! has anyone got any version of Netflix to run on this version of the Epad ??????????

The most recent one I downloaded from Android Market works. . . sort of. The videos play and at the proper speed, but the colors are not quite right (kind of washed out). I believe this is due to the Flash player (listed as 10.3 on my tablet) as it is my understanding that the Flash player is not truly designed for the tablets cpu.

[mrkmni]

Finally I installed the Version 3. The sound works great.

My question now is why I can not use SVOX? There is no menu in the setting? I downloaded the trial voice to try but it did not work. Only one engine: pico, and it does not work.

Any help?

[tedjacob10]

I am using the v3 basic mod and it installed just fine, except I cannot find the universal androot and superuser applications. There is a "software" folder but no applications inside of it. I am having real troubles trying to root, I have tried several versions of universal androot and several versions of superuser and I never get any pop up saying allow superuser permissions when trying to use root explorer. I am trying to do the tx power fix so I can strengthen my wifi signal and watch netflix. Any suggestions would be awesome, Thanks in advance

[mrkmni]

When you install universal androot, do not select install superuser. I did it many times.

My problem with SVOX could be hardware problem. I cannot find the engine after I install it. There is always pico, and it does not work either.

[animal1988]

Hello I have a 7 ​​inch zt-180v2, I would like to install the beta version CM1.1, but I know if I should also update the SPL, I already adjourned when I put the official firmware 0630, now this is that with this firmware is the same, or some improvement.

This post has been edited by animal1988: 20 January 2012 - 03:03 PM

[C4T]

Best ROM I tried so far. Only the laucher lags behind.

[pmist]

I have:

ZT-180-102 V2
MODEL: ZT180G2J2.4102M512F4

I installed the Version 3 and works great

Thank you very much SMaxtor

[redwolf1017]

okay, since i cant start a new topic, this is the only place i knew to post this.

I have a 180 v2 h model.

When i press the power, the blue light comes up, but as soon as i let up on the power button, the light goes off.

i discovered that if i press down just a little left of the camera, it will boot properly, i was able to install this rom while holding down.

does anyone know what the cause of this problem is?

could i take it apart and tighten something to get it to work properly?

thanks,
Luke

[clicker666]

Thanks for the great mod! I was wondering how you show all apps so you can drag them to the homescreen?

[clicker666]

I figured it out. Is this mod compatible with open vpn?

[draelee]

SMaxtor, on 23 November 2011 - 08:46 AM, said:

Sorry, it is only a custom mod, not a rom. i can't create new kernels.

Hi I have a tablet with the model number zt180102asrta0425s6 all the ones i see close to this have an F on the end and my sticker does not. so I am not sure but I do have an hdmi port and based off the images it looks like I have a v2. the original owner said he believes its a 4gb one but because its in a constant bootloop I don't know how i can check. any help or insight would be appreciated.

Oh on my serial at the end it has a -H does that mean i use the h roms?? based off of what im reading i think im on the right track

This post has been edited by draelee: 08 February 2012 - 02:14 PM

[draelee]

awesome rom. everything installed flawlessly. thank you for this

[jaydoc]

Hi all

I bought a ZT180 V2 in July 2011. I have not had much use for it for a long time. When I was browsing through these forums I found this custom ROM and wanted to install it. But I have tried two ROMS so far -

Final CM1.0
ZT-180v2.5 F Model (30.07.11) - says zimage_update failed. press any key to cancel

Beta 1.1
ZT-180v2F 0730 (G2) - says found G2_SPL. Update failed


I tried opening my tablet, but could only open one side - I think I have white board.

The barcode sticker on it reads MODEL ZT180102ASRTA0621S6F.

I am confused - so if anyone can help me find which of these ROMS will be suitable for my tablet, I will be grateful.

Thanks.

This post has been edited by jaydoc: 11 March 2012 - 11:51 PM

[blaw918]

SMaxtor, on 21 November 2011 - 06:43 AM, said:

Sorry for the bad english but it isn't my fault. It is the fault from google translation. If you find an error, take it as a gift or send me a correction.

ur roms work great. are u working on any new ones?

[blaw918]

jaydoc, on 11 March 2012 - 11:46 PM, said:

Hi all

I bought a ZT180 V2 in July 2011. I have not had much use for it for a long time. When I was browsing through these forums I found this custom ROM and wanted to install it. But I have tried two ROMS so far -

Final CM1.0
ZT-180v2.5 F Model (30.07.11) - says zimage_update failed. press any key to cancel

Beta 1.1
ZT-180v2F 0730 (G2) - says found G2_SPL. Update failed


I tried opening my tablet, but could only open one side - I think I have white board.

The barcode sticker on it reads MODEL ZT180102ASRTA0621S6F.

I am confused - so if anyone can help me find which of these ROMS will be suitable for my tablet, I will be grateful.

Thanks.

Final Release CM1
ZT-180v2 H + F Model (until 30.07.11)
thats what i have and it runs great. i used the basic one cause i had no use for surfstick

[Acham]

Hi all: I have some difficulty in understanding what version of this tablet I have and so what mod I should install.
Can you help me ?

MODEL: ZT180102ASRTA0808S6F
SN: CQ1109...911

I can read an "h" in the lower right corner. Does this mean I should use ZT-180v2 H + F Model (until 30.07.11) ?

Thanks for your help.

[omarahum]

Acham, on 06 May 2012 - 11:29 AM, said:

Hi all: I have some difficulty in understanding what version of this tablet I have and so what mod I should install.
Can you help me ?

MODEL: ZT180102ASRTA0808S6F
SN: CQ1109...911

I can read an "h" in the lower right corner. Does this mean I should use ZT-180v2 H + F Model (until 30.07.11) ?

Thanks for your help.

I believe the 0808 in your model number means you should use the 08.08.11 or newer version (different audio chip)....

[dsysrec]

angry birds space from market, not running on v3. why? rio, seasons running fine.

[fgomes]

Hi, I have a ZT-180, model ZT180102ASRTA0425S6. Adding all the partition space (except the external SD of course), it seems to have 2GB flash. The RAM size is reported as 384MB, I suppose it has 512MB RAM but I don't know where are the remaining 128MB used. The tablet has no HDMI connector and doesn't have a built-in camera. From the model number it seems that the ROM is 0425. From this information what ROM do you think I can use on it? The CM1 is for 4GB only so I think it is not applicable, but for the CM1.1 I see a version for 2GB/512MB (2Fv2.2_G2_2g512mb_beta2.zip) and other for no hdmi / no camera (2Fv2.2_G2_nohdmicam_beta2.zip). Do you think that any of these versions are applicable?

Thanks in advance.

Fernando