[pixapo]

Loonix, on 12 April 2012 - 12:14 PM, said:

try the u-boot.bin from the 1GHz folder

Thx for your quick answer. Replaced u-boot.bin with the one in the 1Ghz folder and flashed again (is that waht you suggested?)but unfortunately didn't change anything, the tab stuck immediately after first logo. Any other idea?

[pixapo]

I think that tsunamis boot loader is not compatible with my dropad (it was one of the first units to get out). Tsunami installed its own BL replacing the c8lean one and now I can't reverse the situation reflashing c8lean or any other rom. I know the unbrick proc would do the job but I wonder if there is a simpler way to replace the BL.

Enviado desde mi GT-I9100 usando Tapatalk

This post has been edited by pixapo: 13 April 2012 - 07:42 AM

[fkinell]

To date this has been the best ROM for the E-TAB 7006. I am looking forward to further updates

[woge]

DO NOT run this rom on a A8T.. It will hard Brick It!

This post has been edited by woge: 20 May 2012 - 08:30 AM

[kukalikuk]

I just realize this FW doesn't support adhoc, right?
How to apply the adhoc patch from previous FW?

[kukalikuk]

Madan, on 01 January 2012 - 07:48 AM, said:

I flashed with 1.9 just a while ago and tested adhoc wifi. Works without any issue with my cell phone (SE Neo V) as hotspot. I had earlier (1.7)tested with Nokia 5800 too but now I do not have that phone. There seems to be no problem with Rom. Pl carefully check your settings at both ends. All the best.

I think your SE tether as hotspot not ad hoc wifi, I'm using connectify for my windows XP and tsunami 1.9 doesn't recognize my ad hoc. Tried to change the wpa_supplicant and libwpa in system with adhoc patch from previous FW with no luck.
Please confirm anyone?

FYI, connectify can make a real hotspot in windows7 but only ad hoc in XP and vista.

[Madan]

kukalikuk, on 20 May 2012 - 02:10 AM, said:

I think your SE tether as hotspot not ad hoc wifi, I'm using connectify for my windows XP and tsunami 1.9 doesn't recognize my ad hoc. Tried to change the wpa_supplicant and libwpa in system with adhoc patch from previous FW with no luck.
Please confirm anyone?

FYI, connectify can make a real hotspot in windows7 but only ad hoc in XP and vista.

@kukalikuk You are right. I always thought they meant the same thing. Would you mind letting me know the difference! I no longer use Tsunami but I can test with the rom (Namko ICS) if connectify works on my machine.