7" WM8650 Netbook Linux Port Status page
Posted 26 May 2012 - 05:08 PM
I successfully installed the Debian sid on my 7" tablet. Really a great project!
Now I want to build a special wireless driver and need the kernel headers.
Because the kernel is 126.96.36.199 I need the linux-headers 188.8.131.52. Where do I get these headers?
What about a v5 of the debian image?
Posted 28 May 2012 - 03:38 PM
Any suggestion to get WiFi and keyboard working?
EDIT: I have just read post #185, with a solution to a problem that looks the same as mine. Will try it ASAP.
This post has been edited by doragasu: 29 May 2012 - 02:23 AM
Posted 29 May 2012 - 03:03 PM
1.- Locale generation doesn't work properly. I have changed /etc/locale.gen to the ones I want, and ran locale-gen. I rebooted but nothing changed
2.- It happened to me twice that the partition table in the SD card gets corrupted. If I regenerate the partition table and (without formatting) check the card for errors, I get the filesystem back, but this is very nasty.
I have another problem, but I suppose it's a hardware problem, because it happens in both Android and Debian. The problem is when I slide a finger over the touchpad, it takes some time (maybe 0,5s) for the touchpad to "wake up" and start moving the cursor. When the cursor starts moving, it works well until I stop moving it for a while. Then when I start sliding the finger again, the problem is repeated. Does this happens to other units or is my touchpad defective?
EDIT: Got locale generation to work, using "dpkg-reconfigure locales" command. I hope the data corruption can also be solved...
This post has been edited by doragasu: 29 May 2012 - 03:17 PM
Posted 12 July 2012 - 06:48 AM
Posted 23 December 2012 - 01:02 PM
Posted 03 March 2013 - 06:45 AM
Posted 21 April 2013 - 12:13 PM
Posted 06 May 2013 - 11:40 AM
I've bought a netbook called BAK BK-709AND ( Product Page: Link ).
I installed debian on my SD Card and he booted correctly.
However as I stated, USB Keyboard only works if plugged after X is loaded,
case else touchpad and usb keyboard is not recognized and I'm forced to reboot the PC.
Second bigger problem is the integrated keyboard is't working but still I have to try editing X11.conf.
Third problem is that after any reboot the filesystem is checked for errors and I still have not found a solution.
Last problem is that the wifi card isn't detected but I have not tryied to install modules yet. My card is an RTL8188CUS.
There's somebody that can help me to solve these problems? I formatted SD Card as EXT2, is better convert it to EXT3?
Thank you in advance and sorry for my bad english!