[marky66]

Hi all

I bought a HT_Pad 1051 Tianfeng build tablet a few months ago and trying to upgrade the internal SD card.

It came with the 20110311 firmware on a 4 G card. No problems opening the case with ipod opening tools.

I had constant 256 errors upgrading to a 8G card until the 256-error-8GB-HT-PAD-1051-Tianfeng-FW-Upgrade-Pack was released.
I currently have a working Singularity v5 firmware on a 8G card.

I have continued to try a 16 G Card but get constant 22 errors - log as below:

Sunday, August 14, 2011 19:29:40
1 - Panel A Start processing SD <LIST/>.

1 - Panel A Start <CMD/> type="find" body="BootStrap" file="" timeout="60" onError="" text="".

1 - Panel A Finished <CMD/> type="find" body="BootStrap" file="" timeout="60" onError="" text="" SUCCESS code=0.

1 - Panel A Start <CMD/> type="init" body="Memory" file="mx51to2.ddr.xml" timeout="10" onError="" text="".

1 - Panel A Finished <CMD/> type="init" body="Memory" file="mx51to2.ddr.xml" timeout="10" onError="" text="" SUCCESS code=0.

1 - Panel A Start <CMD/> type="load" body="" file="uImage" timeout="10" onError="" text="Doing Kernel.".

1 - Panel A Finished <CMD/> type="load" body="" file="uImage" timeout="10" onError="" text="Doing Kernel." SUCCESS code=0.

1 - Panel A Start <CMD/> type="load" body="" file="initramfs.cpio.gz.uboot" timeout="10" onError="" text="Doing Initramfs.".

1 - Panel A Finished <CMD/> type="load" body="" file="initramfs.cpio.gz.uboot" timeout="10" onError="" text="Doing Initramfs." SUCCESS code=0.

1 - Panel A Start <CMD/> type="load" body="" file="u-boot.bin" timeout="10" onError="" text="Loading OS image.".

1 - Panel A Finished <CMD/> type="load" body="" file="u-boot.bin" timeout="10" onError="" text="Loading OS image." SUCCESS code=0.

1 - Panel A Start <CMD/> type="jump" body="" file="" timeout="10" onError="" text=" Jumping to OS image. ".

1 - Panel A Finished <CMD/> type="jump" body="" file="" timeout="10" onError="" text=" Jumping to OS image. " SUCCESS code=0.

1 - Panel A Start <CMD/> type="find" body="Updater" file="" timeout="60" onError="" text="".

1 - Panel A Finished <CMD/> type="find" body="Updater" file="" timeout="60" onError="" text="" SUCCESS code=0.

1 - Panel A Start <CMD/> type="pull" body="?" file="device.xml" timeout="10" onError="" text="Getting device info.".

1 - Panel A Finished <CMD/> type="pull" body="?" file="device.xml" timeout="10" onError="" text="Getting device info." SUCCESS code=0.

1 - Panel A Start <CMD/> type="show" body="" file="device.xml" timeout="10" onError="" text="".

1 - Panel A Finished <CMD/> type="show" body="" file="device.xml" timeout="10" onError="" text="" SUCCESS code=0.

1 - Panel A Start <CMD/> type="push" body="mknod block,mmcblk0,/dev/mmcblk0,block" file="" timeout="10" onError="" text="".

1 - Panel A Finished <CMD/> type="push" body="mknod block,mmcblk0,/dev/mmcblk0,block" file="" timeout="10" onError="" text="" SUCCESS code=0.

1 - Panel A Start <CMD/> type="push" body="pipe fdisk /dev/mmcblk0" file="fdiskcmd.txt" timeout="10" onError="" text="Create partition for SD Card".

1 - Panel A Finished <CMD/> type="push" body="pipe fdisk /dev/mmcblk0" file="fdiskcmd.txt" timeout="10" onError="" text="Create partition for SD Card" SUCCESS code=0.

1 - Panel A Start <CMD/> type="push" body="frf" file="" timeout="10" onError="" text="Finish Create partition".

1 - Panel A Finished <CMD/> type="push" body="frf" file="" timeout="10" onError="" text="Finish Create partition" SUCCESS code=0.

1 - Panel A Start <CMD/> type="push" body="mknod block,mmcblk0/mmcblk0p1,/dev/mmcblk0p1,block" file="" timeout="10" onError="" text="".

1 - Panel A Finished <CMD/> type="push" body="mknod block,mmcblk0/mmcblk0p1,/dev/mmcblk0p1,block" file="" timeout="10" onError="" text="" FAIL code=-22.

Panel A: Updater Error 0xffffffea (-22) -

2 - Panel A Finished processing SD <LIST/> : FAIL code=-22.

I've been using a Kingmax 16 G card, cleaned with diskpart, using the 16GB-HT-PAD-1051-Tianfeng-FW-Upgrade-Pack.

I've tried a few different firmware upgrade packs using the 16G fdiskcmd.txt (instead of the 8 G).

Apart from trying a different SD card brand, I'm uncertain what to try next or will I have to accept a 8 G card upgrade?

Any advice will be greatly appreciated.

Regards

Mark

[Reimar]

I didn't use any Kingston Cards anymore because of problems with 90% of them I had faced in the past!

I would suggest to use a different Brand. I mainly use Verico and Transcend! No problems with them (for me)!

[marky66]

Hi Reimar

Thanks for your reply.

I'm in the process of transferring files from a 16 G Team group card. I'll give this card a go.

Thanks again

Mark

[navster]

marky66, on 15 August 2011 - 07:47 AM, said:

Hi Reimar

Thanks for your reply.

I'm in the process of transferring files from a 16 G Team group card. I'll give this card a go.

Thanks again

Mark

Try flashing your 16GB card in this order:

256-error-8GB-HT-PAD-1051-Tianfeng-FW-Upgrade-Pack
16GB-HT-PAD-1051-Tianfeng-FW-Upgrade-Pack

[marky66]

Hi Reimar and Navster

I've continued to try a 16G Team Grp SD card.

Continuing to get error 22.

I tried the sequence:
256-error-8GB-HT-PAD-1051-Tianfeng-FW-Upgrade-Pack
16GB-HT-PAD-1051-Tianfeng-FW-Upgrade-Pack

Just got error 22 on both flashes.

? wondering what error 22 means.

Unless there are other suggestions, I just leave it with a 8G Card.

Thanks Mark

[navster]

marky66, on 21 August 2011 - 06:23 AM, said:

Hi Reimar and Navster

I've continued to try a 16G Team Grp SD card.

Continuing to get error 22.

I tried the sequence:
256-error-8GB-HT-PAD-1051-Tianfeng-FW-Upgrade-Pack
16GB-HT-PAD-1051-Tianfeng-FW-Upgrade-Pack

Just got error 22 on both flashes.

? wondering what error 22 means.

Unless there are other suggestions, I just leave it with a 8G Card.

Thanks Mark

Did you remove the SD card partitions in Windows Disk Management?

[marky66]

Hi Navster

Thanks for your reply.

I re-tried the sequence on a "cleaned" 16G card thru diskpart:
256-error-8GB-HT-PAD-1051-Tianfeng-FW-Upgrade-Pack
16GB-HT-PAD-1051-Tianfeng-FW-Upgrade-Pack

I got further than before. The flashes would freeze at the end requiring the tablet to be reset.

When the tablet is started it would freeze at "ANDROID_" flashing cursor stage.

I'm reluctant to buy a 16G sandisk card as I have a few 16G cards now.

I guess I'll stick with the 8G Card that I flashed with the 256-error-8GB-HT-PAD-1051-Tianfeng-FW-Upgrade-Pack

Thanks Mark

[navster]

marky66, on 22 August 2011 - 07:03 PM, said:

Hi Navster

Thanks for your reply.

I re-tried the sequence on a "cleaned" 16G card thru diskpart:
256-error-8GB-HT-PAD-1051-Tianfeng-FW-Upgrade-Pack
16GB-HT-PAD-1051-Tianfeng-FW-Upgrade-Pack

I got further than before. The flashes would freeze at the end requiring the tablet to be reset.

When the tablet is started it would freeze at "ANDROID_" flashing cursor stage.

I'm reluctant to buy a 16G sandisk card as I have a few 16G cards now.

I guess I'll stick with the 8G Card that I flashed with the 256-error-8GB-HT-PAD-1051-Tianfeng-FW-Upgrade-Pack

Thanks Mark

It's just by pure chance I purchased a 16GB SanDisk SD card it's quite annoying that the Freescale install tools are intollerant of other vendor SD cards but then again this is hardly surprising because everything in their documentation suggests their products are always built using SanDisk storage

I have one other suggestion which is based on some work by Muxa52 on the Russsian 4pda.ru forums, this approach uses a Linux shell script to replace the different fdiskcmd.txt files, automatically picks up the SD card size and paritions it accordingly, however I have not tested it as I have never been able to simulate erorr 22:

http://muxa52.narod.ru/

You may also want to view the above link via Google Translate

[marky66]

Thanks Navster

I had a look with google translate - tried one download without success.

I've ordered a 16G Sandisk card for about 22 AU dollars - should get it next week.

I'll update when I've tried to flash.

Thanks again

Mark

[marky66]

Hi again

I've been able to flash with the Russion tool with a Gpad firmware.

Only problem is the camera doesn't work but then again with the Singularity v5 on the tablet the camera doesn't work either

Mark