Jump to content


Photo

[ROM] - MID V8 - Modroid-v7 FINAL by wicknix based on 1.5.1


  • Please log in to reply
31 replies to this topic

#21 sdr4w

sdr4w

    Newbie

  • Jr. Member
  • Pip
  • 1 posts

Posted 07 December 2011 - 01:36 PM

I bought a MID V8 (Green on-light, Black audio connector) from Merimobiles.com
I tried Flashing with both the MrTasselhof Custom ROM, and the Slatedroid Singularity ROM.
With both ROMs the unit boots up, but the touchscreen is not working.
No CHANGER.bat file came with ROMs.
Does any know what mods are needed to the env_uboot file to make it work for the MID V8 model I have?

*** FOUND SOLUTION ***

Followed instructions at http://www.techknow.....php?topic=72.0
- Downloaded Universal_Uberoid_WM8650_v10.1.7z (link: http://www.mediafire...3t7cb1i5fzw2mrk)
- Unzipped to SD Card
- Used CHANGER.bat with option #40 (JSA8inch_std_vt1609 8")
- Installed new ROM
- MID V8 works like a champ

Edited by sdr4w, 10 December 2011 - 08:18 PM.


#22 malform

malform

    Newbie

  • Jr. Member
  • Pip
  • 5 posts

Posted 15 December 2011 - 10:36 AM

Hello,

I have 2 of these and am having issues flashing them with these roms. I cant seem to find one that will allow the touch screen to work. And one just keeps getting stuck on the loading screen when I try to flash...

Help please?!

Thanks! :)

#23 malform

malform

    Newbie

  • Jr. Member
  • Pip
  • 5 posts

Posted 03 January 2012 - 08:08 AM

Well... After installing about 30 different variations of the rom, I finally got one that worked completely. Thanks for all the help and suggestions. :\

#24 Spikey DaPikey

Spikey DaPikey

    Member

  • Jr. Member
  • PipPip
  • 12 posts
  • LocationBolton UK

Posted 17 January 2012 - 02:23 PM

Hi all, have just tried to install this, all went well untill it asked me to complete action using either ADW.Launcher or LauncherPro, but the touchscreen is not responding. The landscape/portrait is working, i just cannot 'click' to complete the action. Ant ideas ??
llama llama duck !

#25 Spikey DaPikey

Spikey DaPikey

    Member

  • Jr. Member
  • PipPip
  • 12 posts
  • LocationBolton UK

Posted 17 January 2012 - 02:33 PM

links not working :(


I bought a MID V8 (Green on-light, Black audio connector) from Merimobiles.com
I tried Flashing with both the MrTasselhof Custom ROM, and the Slatedroid Singularity ROM.
With both ROMs the unit boots up, but the touchscreen is not working.
No CHANGER.bat file came with ROMs.
Does any know what mods are needed to the env_uboot file to make it work for the MID V8 model I have?

*** FOUND SOLUTION ***

Followed instructions at http://www.techknow.....php?topic=72.0
- Downloaded Universal_Uberoid_WM8650_v10.1.7z (link: http://www.mediafire...3t7cb1i5fzw2mrk)
- Unzipped to SD Card
- Used CHANGER.bat with option #40 (JSA8inch_std_vt1609 8")
- Installed new ROM
- MID V8 works like a champ


llama llama duck !

#26 Eckopluzz

Eckopluzz

    Newbie

  • Jr. Member
  • Pip
  • 2 posts

Posted 17 February 2012 - 01:08 PM

Searching for help.

The nearest version that works better is: Slatedroid Singularity M008s BETA v2; but with this version Flash doesnt work.

Wating for your support and help to fix my TABLET M008S IN 9.7 INCHES AND M012S IN 8 INCHES.

My best regards!

#27 robertef

robertef

    Newbie

  • Jr. Member
  • Pip
  • 8 posts

Posted 07 April 2012 - 07:51 PM

Quick question: why no bat file in the download to config to a tablet. the doc's refer to this. thanks

#28 robertef

robertef

    Newbie

  • Jr. Member
  • Pip
  • 8 posts

Posted 21 April 2012 - 05:00 PM

Hi Everyone, I really need some help. ordered (from merrymobiles) MID v8 android 2.2 via vm8650 800mhz 8"
Downloaded the newest v7/v8 flash. Had 2 4gb. copied the files to it plus the only changer program i had. Now when i run
changer. bat i get a error copying the set file to the dat file. I wounldn't worry but i did this to two tablets so far and just wasting
money. This is not for me but a present to the grandchild that is stuck on angry birds. thanks for your time. :rolleyes:

#29 robertef

robertef

    Newbie

  • Jr. Member
  • Pip
  • 8 posts

Posted 08 May 2012 - 01:15 PM

Email mePlease, I need help. I got a Mid V8 Android 2.2 Via VM8650 800mhz 8" Tablet.
From merimobiles. I tried Hybrid wm8650, modviolite, slatedroid mid v8 Final.
This is my second day and no luck at all. I need the two files (merimobiles didn't have)
env_uboot, wmt_scriptcmd Thank you, thank you :mellow: If anyone can help, here's my e-mail. really I need help.
The tablet is new.

Edited by robertef, 08 May 2012 - 02:09 PM.


#30 robertef

robertef

    Newbie

  • Jr. Member
  • Pip
  • 8 posts

Posted 10 May 2012 - 12:52 PM

I am really stumped. I got a new chinese tablet from merimimobiles. Mid V8 Android 2.2
Via VM8650 800mhz 8" Model: PC-802. I have tryed every mod that's there and when I flash it just flases
UBEROID. i\I use option 4 in changer.bat tha's for the pc-802 and nothing. At this point I really don't know.
I watch all the installs on here and mine sure don't look like that. is anyone going though this? thanks

#31 robertef

robertef

    Newbie

  • Jr. Member
  • Pip
  • 8 posts

Posted 14 May 2012 - 12:11 PM

Email meMr. Tasselhof. if you will E-mail me your address (or anyone else) I will mail you my new(flashed not working) 8" tablet FREE!
I'm really done with these tablets. I have gotten 3 of these and broke two and thrown away. I would like to see someone get
some use and have fun. Would like to thank all for your help. first email gets it...
I have the tablet all boxed up ready for someone. Just Email me your address and I'll get it off no strings what so ever.
Now's your change to work on another tablet and make a video (which I would like to see) :yahoo:

Edited by robertef, 17 May 2012 - 02:38 PM.


#32 rkddharshana

rkddharshana

    Newbie

  • Jr. Member
  • Pip
  • 3 posts

Posted 06 February 2013 - 10:01 AM

Can I work with office package with this....???




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users