Jump to content


Photo

PLEASE READ Before asking questions about Firmware Upgrades (Flashing roms)


  • Please log in to reply
139 replies to this topic

#101 omarahum

omarahum

    Zenithink Tablet User / Information Transmitter

  • Global Moderators
  • 6,502 posts
  • LocationNYC

Posted 12 October 2011 - 05:35 PM

Hi

please help urgent help required......

Model from the sticker on your ZT-180 : ZT180102ASTRA0312S6
Serial Number from the sticker on your ZT-180: C011032N60000080683
Ram 256mb or 512mb use Android System :
Flash Memory (Internal Storage): 555/721MB
Does your ZT-180 Have a HDMI output port? No
Does your ZT-180 Have a Built in Camera? No
Android Version from settings/ about device (or from Android System Info): AOSP (android_2.2)
Kernal Version from settings/ about device (or from Android System Info): 2.6.32.9
Build Number from settings/ about device (or from Android System Info):zt180-eng.AOSP Openmaster eng.root.20110312.120935 test-keys
Mother Board (PC Board or PCB) Color and Version Number Ruby V1.4, Jade V2.3, Cameo V??
ZT-UPDATE Folder contents: clear_data_part
system.img
system.tar.bz
u-boot.img
update_system_module
userdata.img
zImage
zImage_adb
zImage_cui
zImage_update
ZT_Bx.boot
ZT_Bx.spl

Well it appears you have some sort of ZT-180 v2, but not sure which one with the information you gave. You are on ROM 0312 right now.

The contents of your zt-update folder is a complete mess. The ZT_Bx.* files are for the original 10" ZT-180, not your v2. Also the *.img files are for really old ROMs for the original 10" ZT-180 tablet also to be burned via burntool over usb, again, not for your v2 tablet.....

You have to figure out which v2 board is in your tablet, a G0 (blue in color and has 512MB RAM), G1 (green in color and has 256MB RAM), or G2 (green in color and has 512MB RAM), then we can help you figure out which files should be in your zt-update folder (if you are looking to update your tablet).....

zenithinklogosforsignature3.png
Zenithink ZT-180-101 Original 10" Epad (Ruby 1.2 / 576 - B0) (0603 Froyo) - {July 2010} R.I.P. - May 2013
Zenithink ZT-180-701A 7" Upad (Cameo - E3) (0613/0618 Froyo) - {April 2011}
Zenithink ZT-180-102 10" v2 Zepad (Jade 2.3-Blue - G0) (0613/0618 Froyo) - {April 2011}
Zenithink ZT-280-C91 10" Zepad (H1_2n : 0217 GB
@ 900MHz w/ 2GB Data Partition) - {Sept. 2011}
Zenithink ZT-280-C71 7" Upad (E7_1n : 0217 GB @ 900MHz w/ 1.5GB Data Partition) - {Sept. 2011}
Zenithink ZT-283-C93 10" ZTPad (H6_1f : 0911 ICS w/ 2GB Data Partition and working (pl2303) USB GPS)
- {Oct. 2012}
Zenithink ZT-283-C97 9.7" ZTPad (I1_2a :
0910 ICS w/ 2GB Data Partition and working (pl2303) USB GPS) - {Nov. 2012}

SlateDroid ZT-180 WIKI \ Zenithink Website \ Zenithink FTP \ Stock ROMs \ ZT-28* Modified Kernels & RecoveriesM \ Donations Accepted!
If I've helped you or are using an overclocked kernel I've uploaded, and wish to help support my efforts, please consider leaving me a donation. Thank you!
btn_donate_SM.gif ॐ 
Please click on the Like This button for any posts you like or have helped you to show your appreciation...
Also know that all the staff here are volunteers, we don't get paid for our time spent here, so please be patient with us... Thank you!


#102 anupam

anupam

    Newbie

  • Jr. Member
  • Pip
  • 6 posts

Posted 12 October 2011 - 10:02 PM

Well it appears you have some sort of ZT-180 v2, but not sure which one with the information you gave. You are on ROM 0312 right now.

The contents of your zt-update folder is a complete mess. The ZT_Bx.* files are for the original 10" ZT-180, not your v2. Also the *.img files are for really old ROMs for the original 10" ZT-180 tablet also to be burned via burntool over usb, again, not for your v2 tablet.....

You have to figure out which v2 board is in your tablet, a G0 (blue in color and has 512MB RAM), G1 (green in color and has 256MB RAM), or G2 (green in color and has 512MB RAM), then we can help you figure out which files should be in your zt-update folder (if you are looking to update your tablet).....


Hello I'm unable to flash it that is the problem.

Which rom and from where should i use.

I have tried the wire method but the burntool device 10 donot goes to color green, as im unable to install the driver cause my windows don't recognize it until it is fully turned on.

using the sd card method but that fails too, please help.

#103 omarahum

omarahum

    Zenithink Tablet User / Information Transmitter

  • Global Moderators
  • 6,502 posts
  • LocationNYC

Posted 12 October 2011 - 10:28 PM

Hello I'm unable to flash it that is the problem.

Which rom and from where should i use.

I have tried the wire method but the burntool device 10 donot goes to color green, as im unable to install the driver cause my windows don't recognize it until it is fully turned on.

using the sd card method but that fails too, please help.

ZT-180 v2 tablets only use sdcard method to flash/update the ROM, the usb burntool was for the original 10" ZT-180 and for very old ROMs, it is no longer supported by Zenithink......

As I said in my last reply, we need to know what version of the v2 tablet you have in order to tell what ROM you should install and from where you can download it from.

So, do you have G0, G1, or G2 ZT-180 v2 tablet? There are two things you need to know in order to find out, as I stated earlier.... The color of the board inside your tablet (blue or green) and the amount of RAM you have (256MB or 512MB)......

zenithinklogosforsignature3.png
Zenithink ZT-180-101 Original 10" Epad (Ruby 1.2 / 576 - B0) (0603 Froyo) - {July 2010} R.I.P. - May 2013
Zenithink ZT-180-701A 7" Upad (Cameo - E3) (0613/0618 Froyo) - {April 2011}
Zenithink ZT-180-102 10" v2 Zepad (Jade 2.3-Blue - G0) (0613/0618 Froyo) - {April 2011}
Zenithink ZT-280-C91 10" Zepad (H1_2n : 0217 GB
@ 900MHz w/ 2GB Data Partition) - {Sept. 2011}
Zenithink ZT-280-C71 7" Upad (E7_1n : 0217 GB @ 900MHz w/ 1.5GB Data Partition) - {Sept. 2011}
Zenithink ZT-283-C93 10" ZTPad (H6_1f : 0911 ICS w/ 2GB Data Partition and working (pl2303) USB GPS)
- {Oct. 2012}
Zenithink ZT-283-C97 9.7" ZTPad (I1_2a :
0910 ICS w/ 2GB Data Partition and working (pl2303) USB GPS) - {Nov. 2012}

SlateDroid ZT-180 WIKI \ Zenithink Website \ Zenithink FTP \ Stock ROMs \ ZT-28* Modified Kernels & RecoveriesM \ Donations Accepted!
If I've helped you or are using an overclocked kernel I've uploaded, and wish to help support my efforts, please consider leaving me a donation. Thank you!
btn_donate_SM.gif ॐ 
Please click on the Like This button for any posts you like or have helped you to show your appreciation...
Also know that all the staff here are volunteers, we don't get paid for our time spent here, so please be patient with us... Thank you!


#104 anupam

anupam

    Newbie

  • Jr. Member
  • Pip
  • 6 posts

Posted 12 October 2011 - 10:37 PM

ZT-180 v2 tablets only use sdcard method to flash/update the ROM, the usb burntool was for the original 10" ZT-180 and for very old ROMs, it is no longer supported by Zenithink......

As I said in my last reply, we need to know what version of the v2 tablet you have in order to tell what ROM you should install and from where you can download it from.

So, do you have G0, G1, or G2 ZT-180 v2 tablet? There are two things you need to know in order to find out, as I stated earlier.... The color of the board inside your tablet (blue or green) and the amount of RAM you have (256MB or 512MB)......


hi

its green color
Jade_ver2.3
kingston 2gb
ram is of hynix not sure of th amount of the ram installed.

please check and help

Attached Files



#105 omarahum

omarahum

    Zenithink Tablet User / Information Transmitter

  • Global Moderators
  • 6,502 posts
  • LocationNYC

Posted 12 October 2011 - 10:50 PM

hi

its green color
Jade_ver2.3
kingston 2gb
ram is of hynix not sure of th amount of the ram installed.

please check and help

I am guessing you have a G2 tablet, in that case, I would recommend installing this ROM - http://www.zenithink...ownews_199.html (Download link - http://www.zenithink...12_2GB_0613.rar)

Download the file, uncompress it, and put all the files (boot.logo, data.tar.bz, system.tar.bz, usr.tar.bz, zImage, zImage_adb, zImage_factory, zImage_ums, zImage_update, and ZT_G2.spl) on your "real"/external sdcard in a folder named zt-update. Put the sdcard in your tablet, turn it on and then press the left volume/toggle key, when asked to flash the spl, press the round button in front, then the rest it should do by itself and reboot to the new ROM.....

zenithinklogosforsignature3.png
Zenithink ZT-180-101 Original 10" Epad (Ruby 1.2 / 576 - B0) (0603 Froyo) - {July 2010} R.I.P. - May 2013
Zenithink ZT-180-701A 7" Upad (Cameo - E3) (0613/0618 Froyo) - {April 2011}
Zenithink ZT-180-102 10" v2 Zepad (Jade 2.3-Blue - G0) (0613/0618 Froyo) - {April 2011}
Zenithink ZT-280-C91 10" Zepad (H1_2n : 0217 GB
@ 900MHz w/ 2GB Data Partition) - {Sept. 2011}
Zenithink ZT-280-C71 7" Upad (E7_1n : 0217 GB @ 900MHz w/ 1.5GB Data Partition) - {Sept. 2011}
Zenithink ZT-283-C93 10" ZTPad (H6_1f : 0911 ICS w/ 2GB Data Partition and working (pl2303) USB GPS)
- {Oct. 2012}
Zenithink ZT-283-C97 9.7" ZTPad (I1_2a :
0910 ICS w/ 2GB Data Partition and working (pl2303) USB GPS) - {Nov. 2012}

SlateDroid ZT-180 WIKI \ Zenithink Website \ Zenithink FTP \ Stock ROMs \ ZT-28* Modified Kernels & RecoveriesM \ Donations Accepted!
If I've helped you or are using an overclocked kernel I've uploaded, and wish to help support my efforts, please consider leaving me a donation. Thank you!
btn_donate_SM.gif ॐ 
Please click on the Like This button for any posts you like or have helped you to show your appreciation...
Also know that all the staff here are volunteers, we don't get paid for our time spent here, so please be patient with us... Thank you!


#106 anupam

anupam

    Newbie

  • Jr. Member
  • Pip
  • 6 posts

Posted 12 October 2011 - 11:28 PM

I am guessing you have a G2 tablet, in that case, I would recommend installing this ROM - http://www.zenithink...ownews_199.html (Download link - http://www.zenithink...12_2GB_0613.rar)

Download the file, uncompress it, and put all the files (boot.logo, data.tar.bz, system.tar.bz, usr.tar.bz, zImage, zImage_adb, zImage_factory, zImage_ums, zImage_update, and ZT_G2.spl) on your "real"/external sdcard in a folder named zt-update. Put the sdcard in your tablet, turn it on and then press the left volume/toggle key, when asked to flash the spl, press the round button in front, then the rest it should do by itself and reboot to the new ROM.....


thanks alot it is flashing right now,
will update you about the end result,
is it the latest rom for my pad??

thanks really helpful board and guys

#107 omarahum

omarahum

    Zenithink Tablet User / Information Transmitter

  • Global Moderators
  • 6,502 posts
  • LocationNYC

Posted 16 October 2011 - 10:04 PM

thanks alot it is flashing right now,
will update you about the end result,
is it the latest rom for my pad??

thanks really helpful board and guys

How's your tablet doing? Are you happy with the 0613 ROM?

zenithinklogosforsignature3.png
Zenithink ZT-180-101 Original 10" Epad (Ruby 1.2 / 576 - B0) (0603 Froyo) - {July 2010} R.I.P. - May 2013
Zenithink ZT-180-701A 7" Upad (Cameo - E3) (0613/0618 Froyo) - {April 2011}
Zenithink ZT-180-102 10" v2 Zepad (Jade 2.3-Blue - G0) (0613/0618 Froyo) - {April 2011}
Zenithink ZT-280-C91 10" Zepad (H1_2n : 0217 GB
@ 900MHz w/ 2GB Data Partition) - {Sept. 2011}
Zenithink ZT-280-C71 7" Upad (E7_1n : 0217 GB @ 900MHz w/ 1.5GB Data Partition) - {Sept. 2011}
Zenithink ZT-283-C93 10" ZTPad (H6_1f : 0911 ICS w/ 2GB Data Partition and working (pl2303) USB GPS)
- {Oct. 2012}
Zenithink ZT-283-C97 9.7" ZTPad (I1_2a :
0910 ICS w/ 2GB Data Partition and working (pl2303) USB GPS) - {Nov. 2012}

SlateDroid ZT-180 WIKI \ Zenithink Website \ Zenithink FTP \ Stock ROMs \ ZT-28* Modified Kernels & RecoveriesM \ Donations Accepted!
If I've helped you or are using an overclocked kernel I've uploaded, and wish to help support my efforts, please consider leaving me a donation. Thank you!
btn_donate_SM.gif ॐ 
Please click on the Like This button for any posts you like or have helped you to show your appreciation...
Also know that all the staff here are volunteers, we don't get paid for our time spent here, so please be patient with us... Thank you!


#108 anupam

anupam

    Newbie

  • Jr. Member
  • Pip
  • 6 posts

Posted 16 October 2011 - 10:06 PM

How's your tablet doing? Are you happy with the 0613 ROM?


hi

rom is quite good, is their any other rom upgrade available ??

I'm not able to get my EVDO dongle for internet to work with my pad, do you any procedures to get it work??

thanks

#109 omarahum

omarahum

    Zenithink Tablet User / Information Transmitter

  • Global Moderators
  • 6,502 posts
  • LocationNYC

Posted 16 October 2011 - 10:27 PM

hi

rom is quite good, is their any other rom upgrade available ??

I'm not able to get my EVDO dongle for internet to work with my pad, do you any procedures to get it work??

thanks

For your version of the tablet, I don't think so, but you can always check out the ZT-180 v2 Forum..... The 0730 is for "F" model tablets (IC reset removed for longer battery life), and the 0808 is only for tabets with 0808 in their model number (different audio chip)......

According to the Zenithink FAQ page - http://www.zenithink.../Eabout_15.html

15. 3G dongles which zt180 can support ?

evdo:ZTE MF110,HUAWEI EC122,HUAWEI EC189,Qualcomm...
wcdma:ZTE AC581,HUAWEI E1750,HUAWEI E1752...


16.How to connect USB 3G dongle?
(1).Insert the 3G usb dongle,click "settings" ---"wireless & networks"
(2).Disconnect any wireless
(3).click to turn on 3G, choose which model you want EVDO or WCDMA, save it ,then shut the tablet down , then restart it .
(4).wait utill the wileless signal icon changed(about 15 seconds), until the 3G icon appear
(5). Return to desktop, you can surf the net


If you need more help, I'd suggest posting in the ZT-180 v2 forum - http://www.slatedroi.../189-zt-180-v2/





zenithinklogosforsignature3.png
Zenithink ZT-180-101 Original 10" Epad (Ruby 1.2 / 576 - B0) (0603 Froyo) - {July 2010} R.I.P. - May 2013
Zenithink ZT-180-701A 7" Upad (Cameo - E3) (0613/0618 Froyo) - {April 2011}
Zenithink ZT-180-102 10" v2 Zepad (Jade 2.3-Blue - G0) (0613/0618 Froyo) - {April 2011}
Zenithink ZT-280-C91 10" Zepad (H1_2n : 0217 GB
@ 900MHz w/ 2GB Data Partition) - {Sept. 2011}
Zenithink ZT-280-C71 7" Upad (E7_1n : 0217 GB @ 900MHz w/ 1.5GB Data Partition) - {Sept. 2011}
Zenithink ZT-283-C93 10" ZTPad (H6_1f : 0911 ICS w/ 2GB Data Partition and working (pl2303) USB GPS)
- {Oct. 2012}
Zenithink ZT-283-C97 9.7" ZTPad (I1_2a :
0910 ICS w/ 2GB Data Partition and working (pl2303) USB GPS) - {Nov. 2012}

SlateDroid ZT-180 WIKI \ Zenithink Website \ Zenithink FTP \ Stock ROMs \ ZT-28* Modified Kernels & RecoveriesM \ Donations Accepted!
If I've helped you or are using an overclocked kernel I've uploaded, and wish to help support my efforts, please consider leaving me a donation. Thank you!
btn_donate_SM.gif ॐ 
Please click on the Like This button for any posts you like or have helped you to show your appreciation...
Also know that all the staff here are volunteers, we don't get paid for our time spent here, so please be patient with us... Thank you!


#110 anupam

anupam

    Newbie

  • Jr. Member
  • Pip
  • 6 posts

Posted 16 October 2011 - 10:31 PM

For your version of the tablet, I don't think so, but you can always check out the ZT-180 v2 Forum..... The 0730 is for "F" model tablets (IC reset removed for longer battery life), and the 0808 is only for tabets with 0808 in their model number (different audio chip)......

According to the Zenithink FAQ page - http://www.zenithink.../Eabout_15.html



If you need more help, I'd suggest posting in the ZT-180 v2 forum - http://www.slatedroi.../189-zt-180-v2/


which model is of 'F' model??

#111 omarahum

omarahum

    Zenithink Tablet User / Information Transmitter

  • Global Moderators
  • 6,502 posts
  • LocationNYC

Posted 16 October 2011 - 10:34 PM

which model is of 'F' model??


Posted Image

Posted Image

zenithinklogosforsignature3.png
Zenithink ZT-180-101 Original 10" Epad (Ruby 1.2 / 576 - B0) (0603 Froyo) - {July 2010} R.I.P. - May 2013
Zenithink ZT-180-701A 7" Upad (Cameo - E3) (0613/0618 Froyo) - {April 2011}
Zenithink ZT-180-102 10" v2 Zepad (Jade 2.3-Blue - G0) (0613/0618 Froyo) - {April 2011}
Zenithink ZT-280-C91 10" Zepad (H1_2n : 0217 GB
@ 900MHz w/ 2GB Data Partition) - {Sept. 2011}
Zenithink ZT-280-C71 7" Upad (E7_1n : 0217 GB @ 900MHz w/ 1.5GB Data Partition) - {Sept. 2011}
Zenithink ZT-283-C93 10" ZTPad (H6_1f : 0911 ICS w/ 2GB Data Partition and working (pl2303) USB GPS)
- {Oct. 2012}
Zenithink ZT-283-C97 9.7" ZTPad (I1_2a :
0910 ICS w/ 2GB Data Partition and working (pl2303) USB GPS) - {Nov. 2012}

SlateDroid ZT-180 WIKI \ Zenithink Website \ Zenithink FTP \ Stock ROMs \ ZT-28* Modified Kernels & RecoveriesM \ Donations Accepted!
If I've helped you or are using an overclocked kernel I've uploaded, and wish to help support my efforts, please consider leaving me a donation. Thank you!
btn_donate_SM.gif ॐ 
Please click on the Like This button for any posts you like or have helped you to show your appreciation...
Also know that all the staff here are volunteers, we don't get paid for our time spent here, so please be patient with us... Thank you!


#112 atp_uestc

atp_uestc

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 615 posts

Posted 21 October 2011 - 04:03 AM

a man name "Здравствуйте" send me a email

Здравствуйте, dyliao@zenithink.com.


Hello. I was advised to mail for you.
I have a Zenithink (ZT-180) PAD looping at "ANDROID _".
People on slateroid said i have an unusual serial number device (ZT180102ASRTA0425S6G), concluding the firmware update problem. As an advise, a trick with
4 empty SPL files was used. It sad i have a G2 version. My topic was here (http://www.slatedroi...-flashing-roms/)
Combining the firmwares, my tablet didn't manage to work.
The photos are placed here http://depositfiles....files/ou70vaxv2
(in archive cause its in High definition to see the PCB in details) If there's any advice i can count for, i'd be grateful.

Stavr mailto:Stavr@ua.fm

--
С уважением,
Stavr mailto:Stavr@ua.fm


i ask him try no hdmi firmware. So don't send me many times.
omarahum ask me to write below,although i don't know what means:

Liao Dengyan, Zenithink ROM Developer
Email: dyliao@zenithink.com
Have a question for me? Email me the link to your post here on SlateDroid.

#113 Mike-Riley

Mike-Riley

    Newbie

  • Jr. Member
  • Pip
  • 1 posts

Posted 28 November 2011 - 10:01 PM

When I turn on my ZT-180 I see the "EPAD" logol and at the bottom it'll say "HOMEupdate RIGHT switch" and then quickly flash "start system 'Android mass storage' " it seems like my OS is screwy somehow and I'm not sure how to get her working again. I couldn't get the info on it but I CAN give what I got on the box if it helps.

GZH processor
MB RAM DDR II
4GB Flash NAND
Android 2.2
1 USB 2.0 port
TF card slot ( guessing that means micro SD because thats the only car slot i can find )
1 HDMI port
Built in camera

Now if i hold the "Home" button and power button, i get a prompt that seems like I could get some files of some sort, put em on my SD card and possibly get this creature up and kicking again. Or I could be completly wrong.... Ideas?

#114 VexMD

VexMD

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 214 posts
  • LocationRussia, Moscow

Posted 29 November 2011 - 07:48 AM

Mike-Riley
Never believe to info received from packing box or chineese sites.
1. Give Model# from sticker with bar-code
2. It would be great if you take apart tablet and look the name and color of mainboard

Edited by VexMD, 29 November 2011 - 11:11 AM.


#115 grneggsnham

grneggsnham

    Newbie

  • Jr. Member
  • Pip
  • 3 posts

Posted 20 December 2011 - 12:41 PM

Thanks so much, big help :)

#116 ifallieras

ifallieras

    Newbie

  • Jr. Member
  • Pip
  • 2 posts

Posted 09 January 2012 - 03:07 AM

Before asking questions in the fourms about Flashing (Upgrading) Rom's (Firmware) or why all or part of your ZT-180 does not work after Flashing (Upgrading) your Rom (Firmware) Please try to find out as much of the information below as you can or feel comfortable doing. Also read the wiki LINK ( http://www.slatedroi...Wiki:ZT-180_FAQ ) you will be surprised at how much information you will find there and how many of your questions will be answered

Model from the sticker on your ZT-180
Serial Number from the sticker on your ZT-180
Ram 256mb or 512mb use Android System Info Android Market Link ( https://market.andro...e=search_result ) Direct Download Link (http://www.4shared.c...Info_v1171.html )
Flash Memory (Internal Storage) Size Version 1 2gb = nand Version 2 2gb and 4gb = inand use Android System Info (See links above)
Note: it will not say 2gb or 4gb just tell us what it does say
Note: The reason we want you to check ram and internal storage size is that not all buyers got what they thought they were buying.
If you do not already have Android Market working as yet you can use the direct download link above to download the file to your pc and then place it on your sdcard and use file manager to install it.
Does your ZT-180 Have a HDMI output port?
Does your ZT-180 Have a Built in Camera?
Android Version from settings/ about device (or from Android System Info)
Kernal Version from settings/ about device (or from Android System Info)
Build Number from settings/ about device (or from Android System Info)
Mother Board (PC Board or PCB) Color and Version Number Ruby V1.4, Jade V2.3, Cameo V?? etc. This link will help you open the ZT-180 case Link ( http://www.slatedroi...tion-or-repair/ )
WARRNING: REMOVE SDCARD BEFORE OPENING CASE if you do not remove the sdcard you could break it in half. I know because i forgot and guess what sdcards are all shinny inside.
Note: if you do not feel comfortable opening your tablet we will try to work around this information but it really really does help if you have this information.
Any Rom's (Firmware) you have Flashed or tried to flash onto your ZT-180 and where they came from (links to the site you downloaded from would be good)
ZT-UPDATE Folder contents a detailed list of the files in this folder and where they came from (links to the site you downloaded from would be good)

Always remember we are not mind readers and we can not work magic or see your ZT-180 through our crystal ball, we are users just like you that have had some of the same problems as you are having and through the help of others in this and other fourms have over come them and just wish to help others enjoy there ZT-180.
Also please do not post your questions here please post them in there respective fourms with as much information as you can get about the device and the problem.

Bad Example:
I flashed a rom and now my wifi will not work (This is not good and it will not get you much help at least right away because we will end up asking you most of the questions above and taking up a lot of your time and ours as it sometimes takes hours or even days to get a response to a post.

Good Example:
I have a ZT-180 V2 with a green version 2.3 Jade pcb with 404gb ram and 439mb internal storage (i got this info from Android System Info) and i flashed rome 0603 from the ftp site and here is what files i put in the zt-update folder and the folders i got them from ......nice list of files....... and i can not get the wifi to work right please help...

Also reading is your friend when doing something like this so please read the wiki Link ( http://www.slatedroi...Wiki:ZT-180_FAQ ) and read through the forums because there maybe already and answer to your question waiting there for you which may save you time in the long run because as i said above it sometimes takes hours or even days for someone to respond to your post, again we are just users like you who have jobs and have to sleep sometimes we are not Tech support for Zenithink although some of the members here are Tech's from Zenithink and other members talk with them on a regular basis, so even some of what seem to be the hardest problems just might get solved with the righ information for you.

Last but not least if your problem does get solved please feel free to tell everyone about it in as much detail as you can maybe it will help someone else. Thank you for taking time to read this and i hope in some way it helps you find the answer to your problem.



#117 ItsMe57

ItsMe57

    Newbie

  • Jr. Member
  • Pip
  • 1 posts

Posted 04 March 2012 - 08:31 PM

Hi there,
I bought an used ZT-180 V1.
Sometimes the device loose WIFI Connection.
I like to flash another firmware.
Actual is 0425.

After 2 days with try and error I need help.

I copied Abtekks 3.5 Custom Rom on the 8GB SD Card.
After rebooting the zimage-update is found, but there is an error.

"Image too small for FAT32"

I cant use the USB Burntool, because I have no Win 32 Bit.

Any ideas?

ItsMe57

#118 BigRon

BigRon

    Newbie

  • Jr. Member
  • Pip
  • 5 posts
  • LocationSW England

Posted 25 March 2012 - 10:20 AM

I bought my slate from Cyber City - an "IT emporium" in Shanghai - after attempting without successto buy one in Beijing (where absolutely everything sported a fake "Apple" logo, and the clueless assistants actually BELIEVED that the Android devices they were selling were "genuine Apple products" I wanted a genuine ANDROID product - specifically the (then) new ZT180- , which just confused them.) I bought the machine in late October of 2010, which (I think?!) makes me a fairly "early adopter". One thing that surprises me is that how much a ZT-180 costs TODAY - in 2012 - isn't much different to how much I paid in 2010, which was the Yuan equivalent of about £110.

Model My slate didn't have a sticker as far as I recall. The packaging and boot-up logo tell me that it's an "EPad"
Serial Number see above, but "Sys Info" gives "p7901a"
Ram Sys Info says 289 / 384 MB
Flash Memory (Internal Storage) Size Sys Info says 289 / 384 MB
Does your ZT-180 No
Does your ZT-180 No
Android Version "2.1-update 1"
Kernal Version 2.6.32.9 #1705
Build Number p7901a-eng 2.1-update1 ERE27 eng.wwang. 20100830.105450 test-keys
Mother Board (PC Board or PCB) Color and Version Number Haven't opened the casing, (but will if it's the ONLY way to find out.)
Any Rom's (Firmware) you have Flashed or tried to flash Thus far, none. When I got the slate, there was virtually no user support base; it's only getting an Ainol Novo7 Paladin that's inspired me to upgrade!
ZT-UPDATE Folder contents ???

Basically, I'd like to know what I can upgrade TO, and where to get the files to do it. (plus any other information that you think I might need) By the way.... right from day 1, the WiFi performance has been absolutely dreadful. Now that my mobile phone can act as a WiFi hotspot, improving performance would be something worth havingI'd like to add ClockWorkMod as well... is there a ZT180 version?

Edited by BigRon, 25 March 2012 - 02:17 PM.

I was part of the team that launched HTC's first EVER phone. Or rather, the phone that Microsoft stole from Sendo, then paid HTC to build for them. You'll not have heard about it, as Microsoft bought-off Sendo with an astronomical payout... and a gagging order. Before that time, HTC just made iPaq palmtops for Compaq. After it... they started to make ANDROID phones.

#119 BigRon

BigRon

    Newbie

  • Jr. Member
  • Pip
  • 5 posts
  • LocationSW England

Posted 26 March 2012 - 09:09 AM

[quote name='atp_uestc' timestamp='1319187796' post='255170']
a man name "Здравствуйте" send me a email

Здравствуйте, dyliao@zenithink.com.


That's not his name! "Здравствуйте" is Russian for "Hello!" It's pronounced "Does your arse fit yer?" (Which is what British Soldiers posted to Berlin used to be told to say to Russian soldiers when they met. If you say it quickly, it sounds exactly right!)
I was part of the team that launched HTC's first EVER phone. Or rather, the phone that Microsoft stole from Sendo, then paid HTC to build for them. You'll not have heard about it, as Microsoft bought-off Sendo with an astronomical payout... and a gagging order. Before that time, HTC just made iPaq palmtops for Compaq. After it... they started to make ANDROID phones.

#120 cops

cops

    Newbie

  • Jr. Member
  • Pip
  • 1 posts

Posted 30 March 2012 - 08:53 AM

I am new to Anroid tablets. I have a ZT-180. How can I get Honeycomb 3.2 firmware for ZT-180 and Install ?
Thank you.