[foo1114]

hello all,
i had problem install the driver for SE blank Elvis (driver come with navster upgrade pack). previously i have no problem and installed, but yesterday it just don't work??? any idea??
i using windows 7 ultimate
i don't see any checked box with install anyway

thank you

[maw65]

zdravke, on 22 July 2011 - 02:32 AM, said:

I tried to upgrade my HT_PAD1051 with 8GB flash kit and got error 0x100, on windows 7 x64. I have HT_PAD1051-eng 2.2 FRF85B eng.tianfeng.20110509.105459

Hi I have the same PAD and the same problem, did you solve the problem?

/Marcus

[Spud01]

I'm having trouble storing a flash recovery before upgrading.
Trying to Flash ClockworkMod Recovery using ROM Manager Premium v4.5.0.1
There is memory available, but SD configuration is partitioned and recognised as external SD.

System info:
Model number: HT_PAD1051
Android version: 2.2
Baseband version: unknown
Kernel version: 2.6.31-00011-ge4e866b-dirty
Build number: HT_PAD1051_V1.4-eng2.2FRF85B eng.tianfeng.20110225.185109
Android ID: 9774d56d682e549c
CPU: ARMv7Processor rev5 (v7l)

Any assistance welcome! bit of a newbie here.

[Spud01]

No problems yet. Just need to post a few replies to get full member status.

But, do need advice on how to save a flash recovery to my sd. Currently trying but get sd error - and don't understand why as lots of space available.

Thanks ....

[Reimar]

Normally the external SD Card is shown as extSD while the free space of the internal Memory Card is shown as SDCard.

For to do a recovery flash, you'll need to root your tablet first and after that it shouldn't be a problem to use Rom Manager.

[Spud01]

Reimar, on 04 November 2011 - 09:24 AM, said:

Normally the external SD Card is shown as extSD while the free space of the internal Memory Card is shown as SDCard.

For to do a recovery flash, you'll need to root your tablet first and after that it shouldn't be a problem to use Rom Manager.

Thanks Mr. Imp.

Device has been rooted. Some apps allowed superuser. Problem is with the defined paths of the existing internal SD (the only memory I have since no expansion slot.

Root directories do show up using esfile for example. The ROM Manager wants to write directly to /SDcard but path is not found. ROM Manager has superuser allowed and busybox is installed.

I can use ESfile to copy files back and forth, but other apps don't seem to have access, even with Supoeruser allowed.

Thanks.

[Reimar]

Normally the SD Expansion Slot is located below the Black plastic cover on the back of the case and to access, you'll need to remove that cover.

Could you please post detailed picture with and with remove black plastic cover?

Thanks.

[jonnybb1]

Spud01, on 06 November 2011 - 04:31 PM, said:

Thanks Mr. Imp.

Device has been rooted. Some apps allowed superuser. Problem is with the defined paths of the existing internal SD (the only memory I have since no expansion slot.

Root directories do show up using esfile for example. The ROM Manager wants to write directly to /SDcard but path is not found. ROM Manager has superuser allowed and busybox is installed.

I can use ESfile to copy files back and forth, but other apps don't seem to have access, even with Supoeruser allowed.

Thanks.

Here's a newby to the forum, first time posting here.
I have just acquired an HT_Pad_1051_U1GuCoTijV2.4RC4-eng 2.3.3 GRI40 eng.tianfeng.20111019.122233 / Kernel Version 2.6.35.3-g6e1e1bd-dirty
I need simple instructions on how to get it rooted since Z4root nor Gingerbreak work. Would like to know which Clockworkmod Recovery to use and also it seems the Bootloader locked because none of the four buttons will trigger menu selection, however the buttons do work after normal startup.

Thanx in Advance,

Jonnybb1, Sunny San Diego!

[Reimar]

It's a quite old Firmware in your device!

I would suggest to first update to the firmware from 20110426 using the advice given in this forum (please read all related post's very carefully) and after that update to the Singularity v5 firmware. That should solves your problem.

[nag207]

hello everyone I have flash my tablet and it was successful but after the singularty logo loads I get com.android.prevision something like that and below that I get com.android.sdkpackge it tells me to complete action but my touch screen wont work to choose either action and when I try to shutdown I cant choose ok I have to hold the power button. I took out the original micro sd card out and am useing anothet 8gb card I used usb image tool to copy the original micro sd to the new card then I inserted the new card in to tablet and flashed the firmware as the instructions . And I am at this problem help ?????

Sent from my Dell Streak using Tapatalk

[thelanmath]

Hi everyone,

How can i use sim in the table ? cause i have the issue is no mobile network found

Thanks.

[Neuromancer2012]

I am a newbie to the andriod scene and have recently bought a new HT PAD1051 loaded with ANdriod 2.2 and firmware created in

February 11. Being curious I of course wanted to upgrade it. The journey to do so wasn't strainght forward as each machine

and user have their own path. My journey involved lots of deadends despite reading hundreds of comments on this and other

sites.

I have compiled this brief guide so that if your in my situation you can avoid the problems I had. I wiould like to say that

I found many of the comments on this and other forums extremely useful but by their nature many deal with specific aspects of

the process rather than the whole. Whilst this is at your own risk this process worked for me.

1. Firstly either backup your firmware using suitable software (this is the preferred option - I didn't do this and it wasted

many hours) or download the original M10_05232011_Firmware from here (http://download.express-files.com/?

q=m10+05232011+firmware+zip&wmid=888&subwmid=41) and keep it safe. This step is just in case something goes wrong, you'll

have a fallback.

2. Download the android 2.3 firmware here (http://www.pandawill...Gpad-Gforce-is-

out!)

3. Copy the update folder to your external micro sd card

4. Then save an empty text file using notepad or similar to the same micro sd card and call it update.txt

5. Turn off your HT Pad1051

6. Put it into recovery mode by pressing your power and down volume buttons for 3-4 seconds

7. Choose the update from sd card option and wait a few minutes whilst the update takes place. Some posters recommended

restoring to factory settings at this point, I didn't need to.

8. Choose re-boot. Everything should work except the wifi, however there is a simple fix. Simply rename the

/data/misc/wifi/wpa_supplicant.conf to /data/misc/wifi/wpa_supplicant.bak (rather than delete it) reboot and all is well

(Thanks tjrq).

9. The only other minor issue I have had is that when the Pad is brought out of deep sleep it forgets the time and you need

to update the time before you can use the net or market place. A small inconvenience for the major improvements brought by

2.3 especially on the graphics front - I'm sure that a solution to this exists or will do shortly but I'm too busy enjoying

the andriod experience to worry.

10. Enjoy!

[kpone]

Greetings to everyone

Hi I´m a Herotab m10v2 (Ipad 1051) begginer, and I like to know if someone had the same problem like me...

I follow the guide, but when the MfgTool is in the second part of the proccess (writing the OS) windows (XP)disconnects the tablet like if i unplug the usb and connect it again, and the proccess terminates improperly.

Tnxs for any info and the time you expend on the guide

[kpone]

Sorry its exactly on the "Jumping to Os Image" step

[mande01]

Hello all,
I'm struggling here. I got one of these from china but the storage is only reported as 1.23GB.

I think I've excepted the fact that I've been ripped off but how can I figure out which firware upgrade to use?

Thanks,
Der

[sportsterhd2009]

Anybody have progrss on upgrading to a 32GB internal SD card.