Jump to content


Photo

firmware for the Eken M007 & PC-802 VIA MW8505 Processor


  • Please log in to reply
43 replies to this topic

#1 Clintzodiac

Clintzodiac

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 66 posts

Posted 10 March 2011 - 06:30 AM

This is the firmware for the VIA MW8505 processor for Model numbers Eken M007 also known as the PC-802 8 inch Apad Google Android 1.6 256MB 2GB camera 1.3 MP

http://www.4shared.c..._eken_m007.html

Instruction for how to flash Eken M007/PC-802 with this firmware:

Note: you'd better format your TF card firstly or the device possibly is not able to recognise the card.
1.format your sd /TF card to FAT32 or FAT,
2.you then need to open the downloaded file with 7zip. It will open up into a folder called
"m007_mid8-256M-AppleUI_fake2.0"
open that folder and you get
"m007_mid8-256M-AppleUI."
once again open that folder and you will come to the "script" folder copy this folder across onto the SD/TF card
3. plug your TF card into Eken M007/PC-802.
4. press the power button and the device will identify the firmware and begin to flash automatically.
5. after it has finished the upgrade you will be asked to remove the card and the pad will restart again.
6. done

Edited by Clintzodiac, 10 March 2011 - 07:28 AM.

Eken M003
Eken M002
Smartpad M1a
Apad iRobot Batch 3
M7 MID M70002
Eken M007 (PC-802)
10" ZT180 Epad
10" Superpad

#2 ksion

ksion

    Member

  • Jr. Member
  • PipPip
  • 13 posts

Posted 10 March 2011 - 06:37 AM

I have a problem when you install the firmware: Not find Udisk ( dev/sda ) Fail to update filesystem. Exit!
tell me please what could be the problem? :(

#3 Clintzodiac

Clintzodiac

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 66 posts

Posted 10 March 2011 - 07:25 AM

Did you format your sd /TF card to FAT32 or FAT, you then need to open the downloaded file with 7zip. It will open up into a folder called
"m007_mid8-256M-AppleUI_fake2.0"
open that folder and you get
"m007_mid8-256M-AppleUI."
once again open that folder and you will come to the script folder copy this folder across onto the SD/TF card then insert it nad turn the power back on and it will boot
Eken M003
Eken M002
Smartpad M1a
Apad iRobot Batch 3
M7 MID M70002
Eken M007 (PC-802)
10" ZT180 Epad
10" Superpad

#4 ksion

ksion

    Member

  • Jr. Member
  • PipPip
  • 13 posts

Posted 10 March 2011 - 09:08 AM

Do the instructions, it is loaded, the message:

Android Upgrade Start
Upgrading w-load ...
Upgraded w-load successful!
Upgrading u-boot ...
Upgraded u-boot succesful!

Reboot

Loading kernel ...
Loading kernel successful!

Upgrading file-system ...
Please wait ...

Prepare update files....
Update filesystem Start......

wait fo UDisk ready .........
--> Not find UDisk ( /dev/sda )
Fail to update filesystem. Exit!
:(

Edited by ksion, 10 March 2011 - 09:17 AM.


#5 ksion

ksion

    Member

  • Jr. Member
  • PipPip
  • 13 posts

Posted 10 March 2011 - 09:14 AM

look at the firmware is installed, though it did not work half of the devices and screen 7 "(ePad_ATz115f_OD_script.7z).
It compares two files: update.sh
there is no such information about the "Not find UDisk (/ dev / sda)"

#6 Clintzodiac

Clintzodiac

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 66 posts

Posted 10 March 2011 - 09:25 AM

ePad_ ATz 115f _ OD_ script. 7z ).
where did you get this file it is not the file that I uploaded. my file should pen out as described in the top of the post
Eken M003
Eken M002
Smartpad M1a
Apad iRobot Batch 3
M7 MID M70002
Eken M007 (PC-802)
10" ZT180 Epad
10" Superpad

#7 ksion

ksion

    Member

  • Jr. Member
  • PipPip
  • 13 posts

Posted 10 March 2011 - 10:15 AM

Sorry for my English. Thanks for the quick answers
I set the firmware "firmware for eken m007.rar" (this file)
and me shall issue a message that I describe above.


Installed before this firmware (ePad_ATz115f_OD_script.7z)

Do you speak Russian?
Thanks.

Edited by ksion, 10 March 2011 - 10:18 AM.


#8 ksion

ksion

    Member

  • Jr. Member
  • PipPip
  • 13 posts

Posted 10 March 2011 - 10:34 AM

Well, I'll start all over again
My friend made ​​a device that does not work (the problem was in the BIOS).
I have read how to get it back to life and returned.
Been looking for native firmware on it. Installed all!
Your firmware is coming to my device but not installed. this is a problem:)

#9 wrinkle

wrinkle

    Member

  • Jr. Member
  • PipPip
  • 27 posts

Posted 11 March 2011 - 03:18 AM

ths for share but got a problem Not find UDisk:( M009s is cheap enough and i got a little frantic :unknw: :unknw:

#10 wrinkle

wrinkle

    Member

  • Jr. Member
  • PipPip
  • 27 posts

Posted 11 March 2011 - 03:41 AM

Well, I'll start all over again
My friend made ​​a device that does not work (the problem was in the BIOS).
I have read how to get it back to life and returned.
Been looking for native firmware on it. Installed all!
Your firmware is coming to my device but not installed. this is a problem:)


try to check the route of memory :)

#11 ksion

ksion

    Member

  • Jr. Member
  • PipPip
  • 13 posts

Posted 11 March 2011 - 09:38 AM

try to check the route of memory :)


what kind of memory? BootFlash or other, how can do it?

#12 布卤丝

布卤丝

    Newbie

  • Jr. Member
  • Pip
  • 6 posts

Posted 12 March 2011 - 01:31 AM

Hello Ksion , I have the same MID pc-802,and got the same problem. did you have solve it yet

#13 ksion

ksion

    Member

  • Jr. Member
  • PipPip
  • 13 posts

Posted 12 March 2011 - 05:04 AM

Hello Ksion , I have the same MID pc-802,and got the same problem. did you have solve it yet

no solution :(

#14 Clintzodiac

Clintzodiac

    Advanced Member

  • Jr. Member
  • PipPipPip
  • 66 posts

Posted 14 March 2011 - 04:58 AM

Hello Ksion , I have the same MID pc-802,and got the same problem. did you have solve it yet


have you loaded this firmware "ePad_ ATz 115f _ OD_ script. 7z" yet? I have used it on three of the PC-802's that were bricked and all came back to life. The only other thing you can try is to Format the main drive on the pad to FAT32 and try and reload.
Eken M003
Eken M002
Smartpad M1a
Apad iRobot Batch 3
M7 MID M70002
Eken M007 (PC-802)
10" ZT180 Epad
10" Superpad

#15 布卤丝

布卤丝

    Newbie

  • Jr. Member
  • Pip
  • 6 posts

Posted 14 March 2011 - 06:42 AM

Thanks For Clintzodiac 's reply
But how to Format the main drive?

#16 ksion

ksion

    Member

  • Jr. Member
  • PipPip
  • 13 posts

Posted 14 March 2011 - 07:42 AM

wait fo UDisk ready .........
--> Not find UDisk ( /dev/sda )
Fail to update filesystem. Exit!


solution is found:

Там нужно через переходник USB флешку поставить.
Она (прошивка) находит флешку и начинает долго что то писать на нее.
Потом Флешку надо форматировать либо спец утилитой либо на линуксовой машине. Я так делал (не с этой прошивкой).
:drinks: :drinks: :drinks:

#17 布卤丝

布卤丝

    Newbie

  • Jr. Member
  • Pip
  • 6 posts

Posted 14 March 2011 - 07:56 AM

How? Could you teach me? Thanks!

#18 布卤丝

布卤丝

    Newbie

  • Jr. Member
  • Pip
  • 6 posts

Posted 14 March 2011 - 08:08 AM

Oh, What is that language?
I can not read it, could U key in English? Or IN Chinese?
Hehe :)

#19 布卤丝

布卤丝

    Newbie

  • Jr. Member
  • Pip
  • 6 posts

Posted 14 March 2011 - 08:43 AM

Oh yeah , I have success TO use OTG & usbDisk to flash "Eken M007/PC-802"
And then Flash "ePad_ ATz 115f _ OD_ script. 7z"
Finally , My pc-802 came back to live ,touch screen\sound\viabration is OK , but it is 7inch' firmware.

#20 ksion

ksion

    Member

  • Jr. Member
  • PipPip
  • 13 posts

Posted 15 March 2011 - 08:49 AM

Oh, What is that language?
I can not read it, could U key in English? Or IN Chinese?
Hehe :)


需要有一个通过USB闪存驱动器,提供适配器。
她(固件)发现一根棍子,开始一个长期的时间来写一些东西。
然后,坚持必须格式化一个特殊的工具或Linux机器。我已经这么做了(不符合本固件)。
:drinks: :drinks: :drinks: :drinks:
俄语应教授!(Russian language should be taught!) :rofl:

Send me a PM if you do not understand!

Edited by ksion, 15 March 2011 - 08:51 AM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users