Android Tablets Forum banner

Power, Battery, Wifi LED Mod

5K views 7 replies 6 participants last post by  Dr. Zipper 
#1 ·
Tired of the over bright LEDs? Here's what I did. While I had the case open to get into some other foolery, I used a little black model paint to paint the inside of the case. Works great! Notice the aluminum tape arount the edges of the screen? That's to get rid of the over bright backlight shine.
 
#3 ·
It definitely keeps the light from shinning out. No, the screen doesn't seem any brighter. I did the tape job hoping to cure (at least a bit) a gray casting that I have at the bottom of screen (thought it might be a bad backlight thing). Anyways, didn't cure that problem. That problem (the gray casting) is, I am sure from the touch screen. If I take a close look at the casting, it's definitely arranged in a grid pattern... and that makes me think touch screen...
 
#5 ·
I agree. A little crazy glue applied with a toothpick did a great job for me closing it back up.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top