[jshels]

Hi,
I have an M002 and I can't seem to find a new , working firmware for it.

It is running 1.6.

I downloaded the new firmware from the eken site and I copied the 'Script' folder onto my SD card. The M002 then boots up and displays "Prepare software package..." and then doesn't do anything...just continues bootup as usual.

I tried reinstalling the current firmware and then trying to update to the one from the Eken site and that didn't work either.

I can't figure out how to install either of the .7z files I downloaded from this site.

Can someone please point me in the direction of a newer, working flash firmware update or instructions on how to use the .7z files.

Thanks in advance

[Clintzodiac]

Hi,
  The firmware from Eken is for a latter processor that runs Android 2.2 thats why it didn't load, I used the firmware from the download section on two different units and it works great. You need to have the script folder only on the SD card, nothing else. Check it by opening up the folder on the SD.
On windows it should look like this: F:/script

When you open the script folder it should open out to about 10 other folders and files, If it opens to another script folder then you need to delete the first folder.

[jshels]

Thank you. I realized the problem was that I was on a Mac and didn't have a .7z expander installed.

I uncompressed the folder, copied the script folder to my sd card, it started the upgrade and now it seems to be stuck on "Copy Additional Files to File-System partition ok". It hasn't done anything for a while now.

What should I do?

[tomuky2k]

I have just done this, got stuck so press and held power to shutdown and then flashed with another firmware, all working good now.

[sandy999s]

Hi  i am still facing the problem  .. the steps followed  :

1) Download the firmware(for M002) from ekengroup website and extract it using 7z on windows desktop.

2) copy the the scripts folder to micro SD card and plug into Moo2 tablet.

3) start it

Observations:
it starts and displays "Prepare software package" and later it doesnt go to any upgrade steps but boots normally to the exisitng current version

[Clintzodiac]

Hi reformat the csd to fat38 then copy the script folder across follow my previous instructons and check the disk making sure there is only one script folder I sometimes get fw that have a script folder inside another script folder.

[sandy999s]

Clintzodiac, on 14 February 2011 - 08:24 AM, said:

Hi thanks for the reply . But i couldnt format my memory card(microSD) to fat38. The only option available is fat32. I googled for fat38 format but no success. I have made sure that there is only one folder in mcc i.e script

[yoppie]

how to format to fat38,means fat32? i don't understand.help.thx

[Mp4]

this video is old but you can get the basics from it

[carl.ellis13]

has the firmware download been taken off as all i get is

[#10848] We apologize for the inconvenience, please contact Admin or Global Moderator for support

when i try to download

[romadeush]

Hello! I have 1.9._88 firmware on my Eken M002+. Which android firmware the newest and where can I find and download it?

[TaterHater]

I just formatted the SD to at Fat32, if needed i can just create and compile a Fat38

Anyway i do also get the "prepare software package" any idea?

Thanks!

[DexsLab]

what program did u use to extract the files and did u extract them directly to the sd card

[JONNATT]

well i install firmware m009 run like m002 but is better m009 soo i have a video for u http://www.youtube.c...h?v=1QiNAP0CVyQ and download firmware is https://public.me.com/hh2119
all the firmware m001 to m009

This post has been edited by JONNATT: 06 April 2011 - 05:01 PM

[LAREM4]

but that is not the same version of the M009 and M002 sets there?

[marckdj]

I have a problem. Although the script throw the card, nothing happens when you insert the card into Ekena. Someone can tell me why?