Android Tablets Forum banner

connect epad via usb to pc?

16K views 10 replies 7 participants last post by  curiousengr 
#1 ·
Hi,

Is it possible to connect my epad with a usb cable to my pc?

I tried a double male usb cable but my pc does not see the epad, neither does the epad see the pc.

Do I need a driver installing on the pc or a driver installing on the epad? or both?

Thanks
 
#2 ·
hie. i have a 7 inch epad that i bought from big w. it did not come with a usb cable  (it has an ipod 30 pin connector.) so i use my bro's ipod touch cable to access the epad. but you can not charge via usb port it because you need 9v to charge the batteries and the usb port on pc only puts out 5v
 
#11 ·
Have you tried connecting via RJ45 - Network cable to PC, might need an Ethernet hub or a crossover link to connect direct to PC , or connect to RJ45 port on your ADSL Router if you have one.If you have Windows CE can you 'ping' the PC IP Address ,share a folder on the PC to make it usable.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top