Jump to content


Photo

Please help me identifying


  • Please log in to reply
29 replies to this topic

#1 shreevs

shreevs

    Newbie

  • Jr. Member
  • Pip
  • 2 posts

Posted 14 December 2010 - 01:52 AM

Hello All.
                I have got a tablet, which has specs as follows
Processor: 300Mhz (VIA i think)
Memory: 128MB
Charger 9V
Micro SD card support.
Micro USB port
Model No: Generic (what could that mean?)
Kernal Version: 2.6.29-00236-g4f8dbbb-dirty
Build No.: WMT1.9.1_710Cu
Android 1.6 (DONUT).
On the back side its written "MID"; Input Power: 9v; Designed and Made in China.
Also there are three more switches on the perpendicular side for POWER and VOLUME UP & DOWN.

Please let me know if I can flash a custom ROM on this and if yes how?
Thanks in advance
Shreevardhan
Posted Image
Posted Image

#2 Reimar

Reimar

    Mr. Imperfect

  • Global Moderators
  • 3,061 posts
  • LocationSamut Prakarn (Thailand)

Posted 14 December 2010 - 02:07 AM

Could be an Apad iRobot or even maybe an Flytouch or an Eken M002.  The Flytouch's mainly having 256 MB Memory but some also found with 128 MB.

Take a look at the forum related to the Apad iRobot, Flytouch and Eken M002.

#3 shreevs

shreevs

    Newbie

  • Jr. Member
  • Pip
  • 2 posts

Posted 14 December 2010 - 05:13 AM

Hello all,
                  After a bit of googling around I have came to conclusion that mine is VIA8505 (ARM926EJ-S rev 5 (v5l)) having bogMIPS 174.48. Now what should I do to install the ROMs
Thanks in advance
Shreevardhan

#4 Basri

Basri

    Newbie

  • Jr. Member
  • Pip
  • 5 posts

Posted 14 September 2011 - 09:42 AM

Hi !,
I have exactly the same, but never been successful to root it or find any help any where to upgrade it to a better system than the 1.6 Donut, thats why I´m here hopefully someone can help me.
Please if you find an answer, or may be anyone else on this forum have it, HELP US !!

#5 davidmrtom

davidmrtom

    Newbie

  • Jr. Member
  • Pip
  • 3 posts

Posted 21 September 2011 - 03:03 AM

Hi ,your tablet is good.I just got my Aocos N19 Tablet.

#6 Mike130784

Mike130784

    Newbie

  • Jr. Member
  • Pip
  • 4 posts

Posted 29 September 2011 - 08:59 AM

Hi every one ,.
My name is Mike .
And ive been point out here by admins on HcH because there is support here for the cortex A8
I bought a Xiron ATP7483 Excellent 8 8inch tablet (dutch) and it seems this is called diffrent in the UK
im hoping i can identify this in any off the tablets you support,. so i can get going on Rooting this tablet to put a Custom rom on it,.
for Tablets this is brand new for me and in my experience a tad harder to find since im searching for support on this for weeks now,.
im familliar with flashing rooting.etc.. on my HTC Desire,.using custom roms on it,.
so i hope i can join some dev community supporting my tablet,..

Here are some Specifications of my tablet.
Posted Image
Xiron ATP7483 Excellent 8
Specs:
8 inch Tablet
Android 2.3(.1)
Cortex A8 Chip 1.2 ghz
512 Ram
4GB Intern memmory
8Inch Capacitive TFT Scherm 800×600
3D sensor
Micro sd slot
0.3 megapixels camera
etc,..

#7 Miss Dragon

Miss Dragon

    Dragon Lady

  • Hero Member
  • PipPipPip
  • 6,471 posts
  • LocationDragonDevs

Posted 29 September 2011 - 09:14 AM

Welcome to SLD Mike, Since it's introduction subforum only. I'm going to move your post to here: http://www.slatedroi...let-have-i-got/

Good luck. Posted Image
Places can find me:

HERE

#8 Mike130784

Mike130784

    Newbie

  • Jr. Member
  • Pip
  • 4 posts

Posted 03 October 2011 - 06:27 AM

Bump.///Any one can Identify my Tablet from the 2nd last post ??
  • DoS likes this

#9 SpoinkyNL

SpoinkyNL

    Newbie

  • Jr. Member
  • Pip
  • 3 posts

Posted 05 October 2011 - 01:46 AM

Bump.///Any one can Identify my Tablet from the 2nd last post ??

It's a Hyundai H700 but without HDMI-out.

Rooting guide can be found in Dutch here: http://gathering.twe...874794#36874794
More on that soon though, we're getting a ROM ready that will run in English / Dutch out of the box, without Chinese stuff in there.
  • DoS likes this

#10 datamike

datamike

    Newbie

  • Jr. Member
  • Pip
  • 4 posts

Posted 07 October 2011 - 12:48 AM

I am new here also and I cannot make a new thread yet.

This is my very first tablet ever. I am interested in improving the OS.

I bought my tablet off craigslist. it was listed as: "Irobot epad tablet,android system"

The box is white and says iRobot on it.. the manual doesnt tell me anything about the device, only how to use it.

It has a Silver back. Slit in the back for speakers. webcam on the left. Menu button on the right with a square on it. a rocker button on the top for menu and home.
2.5mm power plug (9v) 3.5mm headphone jack, usb, power switch, usb, micro sd slot.

in settings it says:

Model Number - rk2808sdk
Firmware Version - Android 2.1.0
Kernal Version - 2.6.25 rockchip version 1.2.7 (LaoTang)
Build Number - LaoTang.eng.temp.20101101.230105
CPU - arm926ej-s

Internal Flash Storage - Available Space = 2,713 MB
MID system storage - Available Space = 282 MB

I have no idea what kind of touchscreen this is.

I have been really trying to figure out how to put a custom rom on here, but it seems like everyone is bricking their tablet.
If someone could point me in the right direction or show me where I can pick up all the lingo and terms so I can understand what I am reading, that would be great!

thanks for any replies or help.

#11 Mike130784

Mike130784

    Newbie

  • Jr. Member
  • Pip
  • 4 posts

Posted 12 October 2011 - 07:32 AM

It's a Hyundai H700 but without HDMI-out.

Rooting guide can be found in Dutch here: http://gathering.twe...874794#36874794
More on that soon though, we're getting a ROM ready that will run in English / Dutch out of the box, without Chinese stuff in there.


Thanks mate.
tho some one else pointed me to this page http://www.newsmy.co...p?ArticleID=549
and it seems to be the same one ,
a Newsmy tablet pc Newpad P9

#12 MBI i7

MBI i7

    Newbie

  • Jr. Member
  • Pip
  • 1 posts

Posted 19 October 2011 - 08:38 PM

Hi all! Android newbie here. I bought my MBI i7 tablet in Malaysia while on vacation just this Oct 10. I brought it with me back home in the Philippines and it was great but it only worked for 3 days. Now it's not booting at all. I've tried every possible way to factory reset and even root the device and it still won't boot. Please please please help. I don't want my money go to waste. They have a website but no support link. http://www.mbiv2u.co.../contactus.html

I've attached the image and specs of my tablet. Badly need your help in getting my android up and running again.Attached File  mobile_i7.jpg   40.43KB   7 downloads

#13 Kerry George

Kerry George

    Newbie

  • Jr. Member
  • Pip
  • 2 posts

Posted 27 October 2011 - 06:05 PM

Hi,
I am a newbie to Tablets and Android.
I have a Cybertec HD-NID71 Tablet, the about device info is as follows
Model Number HD-MID71
Android Version = 2.1
Firmware version = V1.02_14.13_EN-2011.03.20
Kernel version = 2.6.25_(V140_D2_CH)_1)

I need help identifying what type it is so I can upgrade the Firmware.

Thanks

#14 mofzan

mofzan

    Newbie

  • Jr. Member
  • Pip
  • 1 posts

Posted 04 March 2012 - 04:43 PM

good.. thanks

#15 sakria

sakria

    Newbie

  • Jr. Member
  • Pip
  • 3 posts

Posted 05 March 2012 - 06:53 AM

Hi, regarding the first post, I think it is an EKAM M002, but I am not sure because of the processor, you should google until you find your model. I did google for almost 10 hours and at last found my Tablet model.

#16 adeelsilat

adeelsilat

    Newbie

  • Jr. Member
  • Pip
  • 4 posts

Posted 07 March 2012 - 04:29 AM

I believe I have got the same tablet as shreevs'

It just says 'MID' at the back, looks almost the same as in the pictures with slight differences.
Red LED - Charging and Green LED - Power
I know the CPU inside is ARMv5 and Memory is 256 MB

So far I have only been able to successfully install two firmwares and when viewed from 'Settings/About', they look like

Model Number: Generic
Firmware: 1.6
Kernel version: 2.6.29-00230g4f8dbbb-dirty
Build Number: WMT2.0.1_88

AND

Model Number: EKEN 256 MB
Firmware Version: 1.9.88.v03
Kernel Version: 2.6.29-00236-g4f8dbbb-dirty
Build Number 1.9

VIA8505 WMT2.0_105 too installed successfully but the touch screen won't work

Now my question is how do I recognize the Android version of these firmwares?
And if anyone can tell me with certainty which model is my slate, I will be really grateful!

Edited by adeelsilat, 07 March 2012 - 05:44 AM.


#17 Eternity

Eternity

    Newbie

  • Jr. Member
  • Pip
  • 2 posts

Posted 05 April 2012 - 05:42 PM

Hello everyone. I just bought a tablet labeled as zenithink c71 but in appearance its a bit different which makes me wonder if its a clone of it.
1) the color is not black, red, and white. The screen area is bordered black but the rest is entirely white.
2) the number of ports is not the same or in the same places. On the left mine has the power port, mini usb, hdmi, a tiny reset pin hole, headphone jack and mic. Where as the zenithink in addition has two mini usb and tf card on that side. My tf card is on the tablets back lower left side.
3) the speaker on the back has two slits instead of three.

Those are the slight difference in my tablet. Is it still a zenithink c71??

#18 DoS

DoS

    Newbie

  • Jr. Member
  • Pip
  • 2 posts

Posted 14 June 2012 - 04:45 AM

Hi,Kerry I've just found your ref Cybertec HD-NID71 Tablet, on SLD site, did anyone come back to you about upgrade?
Model Number HD-MID71
Android Version = 2.1
Firmware version = V1.02_14.13_EN-2011.03.20
Kernel version = 2.6.25_(V140_D2_CH)_1)

If so could you forward to me the same. I've bricked mine but if I do get it to be seen by PC I would like to do same upgrade that is.
Thanks
Dos

#19 Chilly23

Chilly23

    Newbie

  • Jr. Member
  • Pip
  • 6 posts

Posted 15 June 2012 - 08:16 AM

Ok I have a MID PC9702 from Kinwei
Product webpage


See below for pictures. and the spec is as follows
Posted Image
Posted Image
My particular Tab has 8Gb internal storage as well as 512MB DDR3 onboard. I have a 16GB SD Card. It has 3G and has a Sim inserted and all works fine.

It looks like this
Posted Image

Posted Image

Now what i want to know is how do I root and Rom this (if its even possible).

#20 88allheeze

88allheeze

    Newbie

  • Jr. Member
  • Pip
  • 8 posts

Posted 18 June 2012 - 12:17 PM

Have you tried using zroot, super one click or universal qroot?