ePad - HARD RESET - Factory Defaults- H E L P
Posted 19 June 2010 - 02:53 PM
Posted 21 July 2010 - 06:55 AM
Posted 27 July 2010 - 04:23 AM
Posted 09 October 2010 - 04:44 AM
Posted 15 October 2010 - 02:27 PM
Posted 10 December 2010 - 12:49 PM
Posted 06 May 2011 - 10:29 PM
Is there some reson as a new member I can't seem to get the links to work when I click on them they just point me to the main Forum page?
Many thanks, Tim.
Don't worry as an old member it's doing the same thing to me. sending me to the front page. My advice search for posts by Tipstir and follow his advice, He seems to have invested a lot of time into the ROMs and the product to make it work well. Start with this post
Apad iRobot Batch 3
M7 MID M70002
Eken M007 (PC-802)
10" ZT180 Epad
Posted 07 May 2011 - 09:38 AM
Many thanks Clintzodiac for your reply, now searching the forums but I have put my own thread up, 'Do I have a Brick or can it be recovered' and by the lack of responses I must guess I have a brick.
Many thanks for your help, Tim.
Posted 26 February 2012 - 10:40 AM
- Freezes after the "Loading" message during the boot.
- The android system loading and after few seconds the display turn off and don't work nothing.
- Touchscreen does not responding/does not working.
- When upgrade the system of your Android Tablet see message:
"Udisk not found (/dev/sda)
Failed Upgrading filesystem. Exit!"
- Or you just want to reset your Android Tablet
I have the same problems with my Android Tablet and finally after several attempts
find this patch:
So, when you download it you must unzip it
you can unzip it with WinZip which you can here download at free trial mode:
When you unzip it you will see folder with name "2.0188".
Open this folder and you will see folder with name "script",
copy the folder "script" in your micro SD/TF memory card which you will put in your Android Tablet
(ATTENTION: Memory card must be TOTALLY empty!).
1.Connect your Android Tablet with charger.
2.Make sure the tablet is off!
3.Put memory card in your Android Tablet.
4.Turn on the tablet.
5.Now it will update do not interrupt this it can take 5 min.
6.Wait until the tablet says remove memory card.
7.When you remove the memory card the device will OFF.
8.Activate your device and you will be ready to use it again!
(ATTENTION: If you want to use the same memory card in your device you must delete the folder with name "script" from it -
Copy the folder "script" in your PC if you want again reset your Android Tablet).
- ← FLYTOUCH / EPAD TOTALLY BRICKED- BLACK SCREEN - VIA WM8505 Android 1.9
- Flytouch / Epad
- Firmware install error →